|
|
|
|
|
|
|
|
|
High quality, compact signaling devices.
Easily connects to phone systems.
Enables any moderately noisy environments
to have a loud telephone alert.
Available features and options:
Color: Gray
Connects with standard RJ-11C
Phone jack
Adjustable tone and volume
Indoor use, surface mountable
Analog, AC and DC models
UL 1459 Listed, FCC part 68 approved
and DOC certified
Nominal Input Currentor Voltage: 0.02 Amps
Input Current or Voltage Range: 18-30 VAC or VDC
dBA @ 1 meter: 90
REN: N/A
|
High quality, compact signaling devices.
Easily connects to phone systems.
Enables any moderately noisy environments
to have a loud telephone alert.
Available features and options:
Color: Gray
Connects with standard RJ-11C
Phone jack
Adjustable tone and volume
Indoor use, surface mountable
Analog, AC and DC models
UL 1459 Listed, FCC part 68 approved
and DOC certified
Nominal Input Currentor Voltage: 0.01 Amps
Input Current or Voltage Range: 38-60 VDC
dBA @ 1 meter: 90
REN: N/A
|
|
|
|
|
|
|
|
|
|
|
|
The Model 42A00-2 is compatible with all 319.5 MHz GE Security (a.k.a. ITI or Interlogix) and Caddx (crystal or SAW) Learn Mode 63-bit wireless transmitters. This receiver is not compatible with 80-bit wireless transmitters. The Model 42A00-2 Supervised Wireless Receiver allows up to 64 unique wireless transmitters to report information to an HAI home control system. The Model 42A00-2 Supervised Wireless Receiver adds: 16 wireless zones to an HAI Lumina, Omni LT, Omni, Omni IIe, or Omni II home control system. Up to 64 wireless zones on an HAI Lumina Pro, OmniPro, or OmniPro II home control system; however, installing two of these receivers will create 128 wireless zones for an HAI Lumina Pro, OmniPro, or OmniPro II home control system.
Specifications:
Dimensions: 4.5W x 6.4H x 1.2D, excluding antennas
Nominal Current Consumption: 45mA
Operating Temperature: 32o F - 120o F (0° C - 49° C)
Maximum Humidity: 90% relative humidity, non-condensing
|
The Model 45A00-1 Supervised Wireless Receiver allows up to 64 unique wireless security transmitters to report information to an HAI controller. The wireless transmitters replace wired door and window sensors, as well as wired smoke, motion, glassbreak detectors, and handheld keyfobs. These transmitters report status information to the 45A00-1 Receiver which, in turn, processes the information and reports it to the HAI controller.
Specifications:
Home Automation Product No.: 45A00-1
Dimensions: 2.5" W x 3.75" H x 1" D (excluding antenna)
Wireless Devices: 64 max.
Current Consumption: 30mA maximum
Operating Temperature: 32° F to 140° F (0° C to 60° C)
Maximum Humidity: 90% relative humidity, non-condensing
Connection Wire: 4-conductor, 22-gauge or larger
Approvals: FCC compliant
|
|
|
|
|
|
|
|
|
|
|
|
The 56A00-1 Wireless Recessed Door Transmitter is used for protection of doors and windows in installations where the transmitter and magnet must be totally hidden. The supervised transmitter and contact are concealed within the door or window frame for virtual transparency.
Specifications:
Manufacturer: HAI
Manufacturer Product No.: 56A00-1
Dimensions: Transmitter 11/16" OD x 2 9/16" L
Magnet 11/16" OD x 1/2"
|
The 58A00-1 Mini Door/Window Transmitter is a miniature (1.7 inch high x 1 inch wide x .65 inches deep) supervised wireless transmitter that comes with a case tamper switch, wall tamper switch, and a replaceable Lithium battery. The 58A00-1 is a single zone miniature version of the existing 46A00-1 Three Zone Door/Window transmitter with mercury tilt switch for garage doors.
Specifications:
Manufacturer: HAI
Manufacturer Product No.: 58A00-1
Dimensions: Transmitter: 1 11/16" x 1" x 5/8"
Magnet: 1 11/16" x 5/8" x 1/2"
|
|
|
|
|
|
|
|
|
|
|
Wheelock modular telephone alerts are high quality, compact signaling devices. Easily connects to phone systems. Enables any moderately noisy environment such as computer rooms, general office areas and lunchrooms to have a loud telephone alert. Various models are available to accommodate different voltage requirements.
|
|
|
