You are here: Home > Brand
We found 104 results matching your criteria.
Choose a sub category:
Shop Brands
Sort By:
Page of 9
GE 1802  Magnet, Bare Ceramic, 1/2" D X 1/4" L GE 1057 Magnet, Bare Alnico 5, 3/8" Dia. x 1-1/2" Long Nominal
GE 1802  Magnet, Bare Ceramic, 1/2" D X 1/4" L

The 1057 Bare Magnet can be used to actuate most magnetic switches.

Standard Features

  • Alnico 5
  • Dia. .375" +/- .016 x Length 1.5" +/- .030
  • GE 1923 Magnet, 3/8" Dia. X 2-1/2" Long GE 1905 RTV Mounting Compound
    GE 1923 Magnet, 3/8" Dia. X 2-1/2" Long GE 1905 RTV Mounting Compound
    GRI  T8060 140°F Fixed Temperature Sensor For Monitoring High Temperature Requirements Safety Technology Inc. STI-33010 Wireless Button

    The G.R.I. Temperature Sensor is a surface mount switch and comes equipped with three feet of 2 conductor cable to assist in installation. The T8060 can be mounted almost anywhere and their small size allows them to be very unobtrusive. Mounting hardware is included.

    When the normal ambient temperature in the monitored area is above the trip temperature of the Sensor, it must be connected in an Open Circuit alarm loop. When the desired monitored temperature is below the trip temperature, the Sensor must be wired in a Closed Circuit Loop.

  • General temperature monitoring
  • Low cost protection
  • Easy to install
  • Small, unobtrusive Surface Mount
  • Available by special order in 9F increments from 23F to 140F.
  • 1000 piece minimum order
  • STI-33010 Wireless Button

    Wireless Doorbell Button for Wireless Chime Systems. This button can be added to back doors, gates, garage doors or anywhere. It has up to 250 foot operating range and has 32 selectable codes to help block interference from outside signals. The sound can be set on the front of button.

    Button transmits 13 selectable sounds to any receiver. For more information, please see STI-32500.

    STI-33010 FEATURES

    Safety Technology Inc. SS-2000F Stopper Stations - Fire Model, Key to Reset Safety Technology Inc. SS-2002F Stopper Station, Red, Push - Turn to Release Button, Labeled Fire

    This North American style, ADA Compliant, multipurpose push button switch is designed to compliment fire alarm systems. It incorporates a unique, patented design that helps dramatically to stop accidental activation. Raised FIRE and flame symbols molded into product.

    Because of the superior, patented design combined with quality construction, you can expect outstanding performance for years to come. Customers are surprised to find all this quality is available at no increase in price.

    Features:

    • Color: Red 
    • Button Phrase: FIRE 
    • Cover: None 
    • Button Activation: Push-to-activate, Key-to-Reset.
    • Unique, curved design helps protect against accidental activation.
    • Stainless steel backplate with ground lug. 
    • Station housing molded of super tough polycarbonate.
    • Raised FIRE and flame symbols molded into product. 
    • ADA Compliant and UL Listed to U.S. and Canadian safety standards for indoor and outdoor use.
    • When used outdoors, UL requires unit to be protected with an STI UL Listed Weather Stopper. 
    • Has two interchangeable or replaceable N.O. Or N.C., SPST gold-plated contact blocks rated for 1 amp @ 250 VDC.
    • Holds up to three sets of isolated contacts either NO or NC. Standard switch includes two NO contacts. 
    • UL Listed to U.S. and Canadian safety standards.
    • ADA Compliant. 
    • Polycarbonate rated -40F to 120F (-40C to 49C). 
    • Lifetime guarantee against breakage of polycarbonate material (one year on electronic components).

    This North American style, ADA Compliant, multipurpose push button switch is designed to compliment fire alarm systems. It incorporates a unique, patented design that helps dramatically to stop accidental activation. You have the choice of symbol, wording and language.

    Because of the superior, patented design combined with quality construction, you can expect outstanding performance for years to come. Customers are surprised to find all this quality is available at no increase in price.


    Note: Per UL Listing, this model available with "FIRE" label only.
    Features:

    • Color: Red 
    • Cover: None 
    • Button Activation: Push to activate, turn to reset.
    • Button Phrase: FIRE
    • Unique, curved design helps protect against accidental activation.
    • Stainless steel backplate with ground lug.
    • Station housing molded of super tough polycarbonate.
    • ADA Compliant and UL Listed to U.S. and Canadian safety standards for indoor and outdoor use.
    • When used outdoors, UL requires unit to be protected with STI Mini Weather Stopper.
    • Interchangeable or replaceable N.O. or N.C., SPST gold-plated contact blocks rated for 3 amps @ 24 VAC or 1 amp @ 250 VDC.
    • Holds up to three sets of isolated contacts either NO or NC. Standard switch includes one NO and one NC. 
    • UL Listed to U.S. and Canadian safety standards.
    • Polycarbonate rated -40F to 120F (-40C to 49C). 
    • Lifetime guarantee against breakage of polycarbonate material (one year on electronic components).
    Safety Technology Inc. SL-2407 Stopper Station - Slim Line Safety Technology Inc. SS-2010F Stopper Station with Bopper Stopper Cover

    The button is slim and narrow and does not require an electrical box. These features allow it to be mounted in small areas, such as on a doorframe or other tight locations where space is a minimum. The Stopper Station Slim Line can be used for an exit door, access control or as an emergency power off button. Wording options for the unit include: "exit", "push to exit", "push to open", "push to close", "call for help", "push to turn off" or "power off". 

    The Stopper Station Slim Line has a momentary illuminated push button available in red or blue. The form "C" switch contacts are protected by a plastic collar and includes a 5 lead wire for easy connection. It can be used with or without a single gang electrical box. The LED bulb is standard 24 VDC or a 12 VDC version is also available upon request. 

    The Stopper Station Slim Line, SL-2000 series, will help aid customers in need of a multipurpose button for narrow areas.

    Features:

    • Color: Blue 
    • Cover: None 
    • Button Activation: Momentary illuminated blue button 
    • Button fits in small, narrow areas such as on a door frame.
    • Easy installation.
    • Has a momentary illuminated push button.
    • Standard 24 VDC LED or a 12 VDC version is also available upon request.
    • Uses long-life LED.
    • Plastic collar protects switch contacts.
    • Can be used with or without a single-gang electrical box.
    • Form "C" contact rating 30 VDC 5 amps. Includes a 5 conductor lead wire for easy connection.
    • Standard illuminated momentary button is blue (red also available).
    • Custom labeling available. Limited to two lines, seven characters each.
    • Lifetime guarantee against breakage of polycarbonate housing in normal use (one year on electronic components).

    This North American style, multipurpose push button switch and clear Bopper Stopper cover protect a wide range of applications indoors. The button incorporates a unique, patented design and the clear cover helps prevent accidental activation. 

    The highly advanced Stopper Station push button switch is ADA Compliant. Raised FIRE and flame symbols molded into product. Unit has Push-to-Activate, Key-to-Reset button. 

    Molded unit has push to activate, turn to reset.

    The Bopper Stopper cover can take hard knocks in stride while protecting important devices. It's molded of super tough polycarbonate material.

    Features:

    • Color: Red 
    • Button Phrase: FIRE 
    • Cover: Bopper Stopper 
    • Button Activation: Push to activate, key to reset.
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please