|
|
|
|
|
|
|
|
|
|
GRI HTP1 High Temperature Probe for ThermStat-3 Programmable Digital Thermal Sensor
|
GRI HTP2 High Temperature Probe for ThermStat-3 Programmable Digital Thermal Sensor
|
|
|
|
|
|
|
|
|
|
|
|
|
GRI HTP3 Optional Remote Temperature Probe For Thermstat-3
|
The G.R.I. Temperature Sensor is a surface mount switch and comes equipped with three feet of 2 conductor cable to assist in installation. The T8000 Series can be mounted almost anywhere and their small size allows them to be very unobtrusive. Mounting hardware is included. When the normal ambient temperature in the monitored area is above the trip temperature of the Sensor, it must be connected in an Open Circuit alarm loop. When the desired monitored temperature is below the trip temperature, the Sensor must be wired in a Closed Circuit Loop. General temperature monitoring Low cost protection Easy to install Small, unobtrusive Surface Mount Available by special order in 9°F increments from 23°F to 140°F
|
|
|
|
|
|
|
|
|
|
|
|
GRI T8005 Colors W, 5âºC / 41âºF Thermal Sensor/Closed Above Activation Temp/Max Temp 64âºC / 147âºF - GRI T8005
The G.R.I. Temperature Sensor is a surface mount switch and comes equipped with three feet of 2 conductor cable to assist in installation. The T8050 can be mounted almost anywhere and their small size allows them to be very unobtrusive. Mounting hardware is included
When the normal ambient temperature in the monitored area is above the trip temperature of the Sensor, it must be connected in a Closed Circuit alarm loop. When the desired monitored temperature is below the trip temperature, the Sensor must be wired in a Open Circuit Loop
|
GRI T8070 Thermal Sensor - 70⺠- GRI T8070
The G.R.I. Temperature Sensor is a surface mount switch and comes equipped with three feet of 2 conductor cable to assist in installation. The T8050 can be mounted almost anywhere and their small size allows them to be very unobtrusive. Mounting hardware is included
When the normal ambient temperature in the monitored area is above the trip temperature of the Sensor, it must be connected in a Closed Circuit alarm loop. When the desired monitored temperature is below the trip temperature, the Sensor must be wired in a Open Circuit Loop
|
|
|
|
|
|
|
|
|
|
|
|
|
The T8800 from GRI is a single sensor programmable temperature monitoring security device. Unlike it's big brothers, the ThermStat 3 and 4, where four individual sensors are used, the T8800 has only one sensor. The single temperature sensor is housed in the appliance (T8800) or can be ordered with a connected remote probe (T8800R). The memory in the T8800 is non-volatile because all temp trip limits are set with a small screw driver. No typical software program is required. Simple to set. Low Cost Non-Volatile Memory Single Sensor or a Remote Probe up to 500’ Min - Max Temperature Range No Probe - -10ºF to 176ºF Min - Max Temperature Range With Probe - -40ºF to 185ºF Operates with 7.5 VDC minimum to 15 VDC maximum
|
GRI T8800R Temperature Sensor/Remote Probe/Temp Range -40"ºC ( -104"ºF) To 85"ºC (185"ºF)/7.5VDC - 15 VDC
The T8800 from GRI is a single sensor programmable temperature monitoring security device. Unlike it's big brothers, the ThermStat 3 and 4, where four individual sensors are used, the T8800 has only one sensor. The single temperature sensor is housed in the appliance (T8800) or can be ordered with a connected remote probe (T8800R). The memory in the T8800 is non-volatile because all temp trip limits are set with a small screw driver. No typical software program is required. Simple to set
|
|
|
|
|
|
|
|
|
|
|
|
|
GRI T88R Colors Stainless, Replacement Probe For T8800R
|
GRI TP3 Remote Temp Probe f/Thermstat 3
|
|
|
|
|
|
|
|
|
|
|
|
|
Undetected water damage such as that caused by leaking pipes or corroded water heaters cost homeowners ten’s of thousands of dollars each year. Such repairs are time consuming and costly to correct. Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains. Will detect any conductive non-flammable liquid Ideal anywhere water damage could occur Automatic Reset Available in gray only 6 foot jacketed lead standard Custom lead lengths available
|
GRI H8800 Colors W, Humidity Sensor/On Board/Reports Relative Humidity 5% To 95% +/- 5% - GRI H8800
The H8800 from GRI is a single sensor programmable humidity monitoring security device. Unlike
it’s 1st cousin, the T8800, used for temperature sensing, the H8800 has one sensor to detect and
report relative humidity. The single humidity sensor is housed in the appliance (H8800) or it can be
ordered with a remote probe (H8800R). The memory in the H8800 is non-volatile
|
|
|
