You are here: Home > Shop Brands > GE Security > System Connectivity > Fiber Optic > Audio > Multimode
We found 25 results matching your criteria.
Sort By:
Page of 3
GE 1300B-M-R Microphone Audio Signal Preamplifier Rack (2-Channel) GE 1300B-R-R EQ/Limiter & 3 Output Distribution Amplifier (2-Channel)

The 1300B-M Series links incorporate two preamplifier channels for microphone level audio providing up to +70 dB front end gain. The units can supply microphone phantom power at +48 VDC or a single-ended supply of +12 VDC on an individual channel basis. This makes the 1300B-M unit capable of interfacing directly to virtually any microphone.

  • Two-channel microphone input
  • 48 VDC phantom microphone power
  • 20 Hz to 20 kHz audio bandwidth per channel
  • -70 dBu to 0 dBu audio input range
  • Up to +12 dBu audio output
  • 100 dB audio SNR
  • 0.005% THD
  • Interfaces to standard fiber equipment
  • The 1300B-R Series links provide frequency response equalization and signal-level limiting for two audio paths. These units are ideally suited for audio applications where the ambient level and acoustic characteristics vary from one area to another.

  • Two audio inputs
  • 3-band equalization
  • 20 Hz to 20 kHz audio bandwidth per channel
  • Audio input level up to +24 dBu
  • Audio output level up to +12 dBu
  • Balanced 600 ohm impedance
  • 80 dB audio SNR
  • 0.01% THD
  • Interfaces to standard fiber equipment
  • GE 1300B-T-R 4-CH AUD MIXER W/DUAL OUTPUT GE 1315B-R/1B MM - AES/EBU Digital Audio, Rx, Can

    The 1300B-T Series provides two high quality audio mixers. The units can be configured for either two-channel or four-channel mixing, providing either a four-channel mixer with two outputs, or dual two-channel mixers. All input audio channels and mixer outputs have independent gain adjustment capability from Off to +20 dB.

  • Four audio inputs, two audio outputs
  • Individual input/output gain adjustments
  • 20 Hz to 20 kHz audio bandwidth per channel
  • Audio input level up to +12 dB
  • Audio output level up to +12 dBu
  • 100 dB audio SNR
  • 0.005% THD
  • Interfaces to standard fiber equipment
  • The 1315B fiber optic links transmit digital audio one-way over one multimode fiber.

  • One-way digital audio transmission over one multimode fiber
  • Point-to-point digital transmission
  • Intended for the all-digital audio suite
  • XLR transformer-coupled ports
  • 11 dB optical budget
  • Operating distance 2.5 miles (4.0 km)
  • Standalone or rack configurations
  • GE 1315SB-R/1SXX SM - AES/EBU Digital Audio, Rx, Can GE 1315SBL-T/1XX SM - AES/EBU Digital Audio, Tx, Laser, Can

    The 1315SB fiber optic links transmit digital audio one-way over one single-mode fiber.

    Standard Features

  • One-way digital audio transmission over one single-mode fiber
  • Point-to-point digital transmission
  • Intended for the all-digital audio suite
  • XLR transformer-coupled ports
  • 20 dB optical budget
  • Operating distance up to 31 miles (50 km)
  • Standalone or rack configurations

    GE 1315SB-R/1SXX

  • The 1315SB fiber optic links transmit digital audio one-way over one single-mode fiber.

    Standard Features

  • One-way digital audio transmission over one single-mode fiber
  • Point-to-point digital transmission
  • Intended for the all-digital audio suite
  • XLR transformer-coupled ports
  • 20 dB optical budget
  • Operating distance up to 31 miles (50 km)
  • Standalone or rack configurations
  • GE 350A2-R-R/1BAP MM - 2-Way Audio, Intercom Interface, Rx, Rack, 2-Fiber GE 350A2-R/1BAP MM - 2-Way Audio, Intercom Interface, Rx, Can, 2-Fiber

    The 350A Series fiber links are designed specifically for interfacing to the speakers of intercoms manufactured by Aiphone, fully supporting their high quality and low distortion standards. A complete system consists of a pair of transceivers for connection to master and remote intercoms.

    350A Series Standard Features

  • Two-way audio transmission one or two multimode fibers
  • Used with Aiphone compatible systems
  • 10 or 13 dB optical budget
  • Operating distance up to 11 miles (18 km)
  • Optical AGC circuitry
  • Standalone or rack configurations

    GE-350A2-R-R/1BAP

  • The 350A Series fiber links are designed specifically for interfacing to the speakers of intercoms manufactured by Aiphone, fully supporting their high quality and low distortion standards. A complete system consists of a pair of transceivers for connection to master and remote intercoms.

    350A Series Standard Features

  • Two-way audio transmission one or two multimode fibers
  • Used with Aiphone compatible systems
  • 10 or 13 dB optical budget
  • Operating distance up to 11 miles (18 km)
  • Optical AGC circuitry
  • Standalone or rack configurations

    GE-350A2-R/1BAP

  • GE 350A2-T-R/1BAP MM - 2-Way Audio, Intercom Interface, Tx, Rack, 2-Fiber GE 350A2-T/1BAP MM - 2-Way Audio, Intercom Interface, Tx, Can, 2-Fiber

    The 350A Series fiber links are designed specifically for interfacing to the speakers of intercoms manufactured by Aiphone, fully supporting their high quality and low distortion standards. A complete system consists of a pair of transceivers for connection to master and remote intercoms.

    350A Series Standard Features

  • Two-way audio transmission one or two multimode fibers
  • Used with Aiphone compatible systems
  • 10 or 13 dB optical budget
  • Operating distance up to 11 miles (18 km)
  • Optical AGC circuitry
  • Standalone or rack configurations

    GE-350A2-T-R/1BAP

  • The 350A Series fiber links are designed specifically for interfacing to the speakers of intercoms manufactured by Aiphone, fully supporting their high quality and low distortion standards. A complete system consists of a pair of transceivers for connection to master and remote intercoms.

    350A Series Standard Features

  • Two-way audio transmission one or two multimode fibers
  • Used with Aiphone compatible systems
  • 10 or 13 dB optical budget
  • Operating distance up to 11 miles (18 km)
  • Optical AGC circuitry
  • Standalone or rack configurations

    GE-350A2-R-R/1BAP

  • GE 353A-R-R/XXAP MM - 2-Way Audio, Intercom Interface, 4-Wire, Rx, Rack GE B720AR-ESTL MM - Audio, Digitally Processed, Rx, Can, 1300nm

    The 353A Intercom Interface is used in combination with other fiber optic transmission system to provide two-way audio transmission. The 353A is designed to provide the intercom interface that links the remote panels to the master panel.

    353A Series Standard Features

  • Two-way audio transmission
  • Used with Aiphone compatible systems
  • Used with the B746AV, B748AV, S751DA, S754DA, S761DAV, S764DAV or S768DAV fiber links
  • 20 Hz to 5 kHz bandwidth
  • Standalone or rack configurations

    353A-R-R/XXAP

  • The B720A Series high performance broadcast grade fiber transmission system supports one-way High Quality Audio (HQA). The all-digital processing platform features 24-bit audio processing.

    B720 Series Standard Features

  • One-way audio transmission over one multimode fiber
  • 24-bit audio processing
  • 20 Hz to 15 kHz frequency response
  • Balanced or unbalanced audio
  • 13 dB optical budget
  • 70 dB audio SNR
  • 33 kHz audio sampling rate
  • THD < 0.01%

    GE-B720AR-ESTL

  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please