You are here: Home > Shop Brands > Keri Systems Inc.
We found 47 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Keri Systems Inc.

  8-Door Concentrator for PXL-500 Controllers
  Chip Upgrade
  KTA SeriesTime & Attendance Terminals
  KWX Wireless Transceiver
  LAN-520 - RS-485 Over Ethernet
  NXT & Doors NetXtreme
  Proximity Readers
  RF Transmitters and Receivers
  Tiger Controller Access Control Family
With worldwide distribution, Keri is an acknowledged leader and innovator in facility access and security systems, including proximity card access control, telephone entry, alarm system control, and time and attendance.
8-Door Concentrator for PXL-500 Controllers
The KDC-8 8-Door Concentrator, allows for up to four PXL-500 Tiger Controllers and four SB-593 Satellite Expansion Boards to be located in a single 19-inch IT rack-mountable or wall mountable cabinet.
Chip Upgrade
To upgrade PXL-500 firmware
KTA SeriesTime & Attendance Terminals
Keri's KTA Series of Time & Attendance Terminals integrate with the PXL-500/PXL-250 Tiger Controller to provide integrated Access Control and Time/Attendance functionality on a single RS-485 network. Doors software provides basic T/A reporting, and by usi
KWX Wireless Transceiver
Keri's KWX Series of wireless transceivers provide maximum flexibility and ease of installation in access controller network architecture. These wireless transceivers can transmit RS-485 data between controllers at up to 500 feet (150 m).
LAN-520 - RS-485 Over Ethernet
Providing greater flexibility in managing multiple, remote, physical sites, Keri Systems is offering the LAN-520 LAN port allowing PXL-500 controllers to communicate through their RS-485 data ports via Ethernet connections
NXT & Doors NetXtreme
Proximity Readers
RF Transmitters and Receivers
Keri's line of RF Transmitters and Receivers can be used with the PXL-500W and PXL-250W family of Tiger Controllers, or any other manufacturers' access controllers that are 26-bit Wiegand-compatible. One-button and four-button transmitters, typically atta
Tiger Controller Access Control Family
The Tiger Controller is the latest in controller design for the access industry. Using the latest design techniques, the PXL-500 platform is designed to reduce the cost of an access control system by 50%, both the equipment costs and the installation labo
Sort By:
Page of 4
Keri Systems ANT-241 Antenna Remote Wiring Keri Systems ANT-244 Omni-Directional Extended Range Antenna
2.4 GHz Remote Wiring Antenna
Separates antenna from transceiver for better line-of-site.
ANT-244

2.4 GHz Omni-Directional Extended Range Antenna

Keri Systems ANT-24Y Unidirectional Extended Range (Yagi) Keri Systems ANT-91 Antenna Remote Wiring
ANT-24Y

2.4 GHz Uni-Directional Extended Range Antenna (yagi)

915 MHz Remote Wiring Antenna
Separates antenna from transceiver for better line-of-site.
Keri Systems ANT-94 Omni-Directional Extended Range Antenna Keri Systems ANT-9Y Unidirectional Extended Range (Yagi)
ANT-94

915 MHz Omni-Directional Extended Range Antenna

ANT-9Y

915 MHz Uni-Directional Extended Range Antenna (yagi)

Keri Systems CU-500 Chip Upgrade Keri Systems DCR-2 Mounting Rails for IT Rack (pair).

KERI CU-500 Chip Upgrade

To upgrade PXL-500 firmware

DCR-2 Mounting Kit

Concentrator Rack Mounting kit for 19" IT Rack

Keri Systems Inc  KPS-11 POWER SUPPLY Keri Systems Inc.  NXT-1R Euro Mount Proximity Reader
Keri Systems Inc KPS-11 POWER SUPPLY Keriís NXT Series Proximity Readers are designed to blend aesthetics, read range performance, and small package size with an extremely thin profile into a product that is priced significantly less than competing proximity readers. The readers are for use exclusively with Keriís revolutionary access control system based on the NXT Series of IP-based Controllers.

With an allowable cabling distance of 1,000 feet from the controller and using just 4 conductor cable, the NXT Series of Readers dramatically reduce cabling costs when compared to traditional 6 or 7 conductor reader interfaces. Encrypting identification data between the card and reader and supervising the reader from the controller to check for failure provides the most secure reader solution available. The readers are compatible with all NXT Series Cards and Tags.

The NXT-1R Euro Mount Prox Reader offers the best combination of size and read range available. Able to mount directly on a wall or to a European switch box, this unit measures 3.25 inches high by 3.25 inches wide by 0.625 inches deep (8.3 cm high x 8.3 cm wide x 1.6 cm deep) and offers a size and profile not found in many other proximity readers.

Keri Systems Inc.  NXT-4D  A 4-Door Access Controller 05350-001 Keri Systems Inc.  NXT-4DNE  A 4-Door Access Controller 05350-001
The NXT-4D Xtreme 4 Door Controller is built for todays IT environments. With all Ethernet functionality built directly into the controller, Keris proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.

Networking between NXT-4D controllers and/or its sister NXT-2D Xtreme 2 Door Controller also utilize peer to peer Ethernet standards. The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any networks valuable bandwidth.

To expand the systems capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controllers RS-485 trunks (busses). Customers can choose between Keris new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keris MS Series Proximity Readers via the NXT-RM Reader Interface Module.

To manage the system, Doors NetXtreme software has much of the same look and feel as Keris acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture.

Features

  • 4 Door Controller for Keris Doors NetXtreme product line
  • On-board TCP/IP - no network adapters required
  • Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
  • Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
  • Embedded MAC Address for One button AutoConfiguration
  • Built-In Tamper Input
  • Standard 4 PIN Block and RJ Jack built-in for network connection
  • Re-assignable Inputs and Outputs
  • Flash Memory for easy firmware upgrades
  • Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
  • 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
  • Locking Metal Enclosure (optional without)
  • 96 Bit Encryption
  • The NXT-4DNE Xtreme 4 Door Controller is built for todays IT environments. With all Ethernet functionality built directly into the controller, Keris proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.

    Networking between NXT-4DNE controllers and/or its sister NXT-2D Xtreme 2 Door Controller also utilize peer to peer Ethernet standards. The NXT-4DNE is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any networks valuable bandwidth.

    To expand the systems capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controllers RS-485 trunks (busses). Customers can choose between Keris new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keris MS Series Proximity Readers via the NXT-RM Reader Interface Module.

    To manage the system, Doors NetXtreme software has much of the same look and feel as Keris acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture.

    Features

  • 4 Door Controller for Keris Doors NetXtreme product line
  • On-board TCP/IP - no network adapters required
  • Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
  • Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
  • Embedded MAC Address for One button AutoConfiguration
  • Built-In Tamper Input
  • Standard 4 PIN Block and RJ Jack built-in for network connection
  • Re-assignable Inputs and Outputs
  • Flash Memory for easy firmware upgrades
  • Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
  • 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
  • Locking Metal Enclosure (optional without)
  • 96 Bit Encryption
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please