You are here: Home > Shop Brands > Linear > Wireless Security Solutions > Receivers
We found 22 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Receivers

  DX Receivers
  DXS Supervised Receivers
  Standard Digital Receivers
  SX Receiver
DX, DXS, Standard Digital, and SX devices for interface into almost any security system.
DX Receivers
Add wireless capability to new or existing hardwire installations. Performance-enhanced products of our Standard Digital line. DX uses optimized pulse position based RF technology in 1- and 2-channel receivers that support up to 32 quick-learn transmitter
DXS Supervised Receivers
Designates fully supervised models of these same receivers and transmitters. Selectable supervision per channel. Available in 4 or 8-channel configurations. Transmitters include stationary models, handhelds, panics, and bill traps.
Standard Digital Receivers
Linear's economy line of wireless add-ons. Single and multi-channel receivers with 256 code capability. Transmitters include stationary models, handhelds, panics, and bill traps.
SX Receiver
Linear's best line of wireless add-ons. Our most powerful and intelligent receiver uses SAW-based superheterodyne technology and is ideal for high-end hybrid security systems. It has a 1,500 foot range, 16 million code availability, and full supervision f
Sort By:
Page of 2
Linear 109920 1-channel 110V Gate Receiver Linear 302101 2-channel Heavy Duty Gate Receiver
1-channel 110V Gate Receiver

Product Number: MCS109920

Features

  • For use inside metal enclosures and in other applications requiring stronger signal reception
  • Antenna with coaxial connector supplied
  • 1 amp output @ 30 Vac maximum on relay contacts
  • 115 Vac, transformer input (included)
  • Frequency: 300 MHz
  • Codes: 1,024 (set by dip switches)
  • Dimensions: 5.25 x 3.625 x 1.5 inches

    ADI# LN-MCS109920

  • Product Number: MCS302101

    Features

    • For any application requiring two channels in one location - 512 codes each channel
    • Up-down, open-emergency-stop, and other functions
    • For heavy-duty operation
    • Cabinet meets NEMA 13, JIC specs
    • Two-channel relay output, N/O, N/C, Common - rated 1 amp @ 30 Vac max
    • Power: 24 Vac 10% power
    • Frequency: 300 MHz
    • Codes: 1,024 total (set by dip switches); 512 codes each of two channels
    • Dimensions: 6 x 8 x 4 inches
    Linear D-2R 2-Channel Receiver Linear D-4R 4-Channel Receiver
    SNR00009A

    The Model D-2R 2-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs and improve system performance by eliminating RF interference problems present in multiple-receiver installations.

    The Model D-2R is compatible with standard digital transmitters only.

    The outputs of the D-2R receiver are isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts for each channel. The current rating of each relay output is 1 amp at 32 volts maximum.

    Features

    • Operates on 11-24 VDC or 12-16 VAC power
    • Current consumption: 15 mA standby, 60 mA operating
    • Two independent channels
    • Standard digital format: 64 discrete codes
    • Two form "C" relay outputs
    • One Amp contact rating @ 32 Volts AC/DC
    • RF frequency: 303.875 MHz
    • 4.9" W x 4.2" H x 1.3" D
    Product Number: SNR00017A

    The Model D-4R 4-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs and improve system performance by eliminating RF interference problems present in multiple-receiver installations. The Model D-4R is compatible with standard digital transmitters only. The outputs of the D-4R receiver are isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts for each channel. The current rating of each relay output is 1 amp at 32 volts maximum.
    Features

  • Operates on 11-24 VDC or 12-16 VAC power
  • Current consumption: 15 mA standby, 60 mA operating
  • Four independent channels
  • Standard digital format: 64 discrete codes
  • Four form "C" relay outputs
  • One Amp contact rating @ 32 Volts AC/DC
  • RF frequency: 303.875 MHz
  • 4.9" W x 4.2" H x 1.3" D
  • Linear D-67 1-Channel Receiver Linear D-67F 1-Channel Alternating Relay Receiver
    D-67: 1-Channel Receiver

    Product Number: SNR00032

    The Model D-67 1-Channel Receiver is designed for use in security systems and remote switching functions. Typical applications for the receiver include adding a wireless zone, a panic button, or creating a remote arm/disarm feature for a hardwired alarm panel. Each time a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will activate for four seconds.

    The Model D-67 is compatible with standard digital transmitters only.

    The output of the D-67 receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

    Features

    • Operates on 11-24 VDC or 12-16 VAC power
    • One channel
    • Standard digital format: 256 discrete codes
    • One form "C" relay output
    • One Amp contact rating @ 32 Volts AC/DC
    • Four second relay activation time
    • RF frequency: 303.875 MHz
    • 4.9" W x 3.8" H x 1.3" D
    D67F / Product Number: SNR00035

    The Model D-67F 1-Channel Alternating Relay Receiver is designed for use in security systems and remote switching functions. A typical application for the receiver is creating a remote arm/disarm feature for a hardwired alarm panel. When a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will latch. The next time a transmitter is triggered, the receiver's relay will un-latch.

    The Model D-67F is compatible with standard digital transmitters only.

    The output of the D-67F receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

    Features

    • Operates on 11-24 VDC or 12-16 VAC power
    • One channel
    • Standard digital format: 256 discrete codes
    • One form "C" relay output
    • One Amp contact rating @ 32 Volts AC/DC
    • Alternating relay output; transmit to latch, transmit to un-latch
    • RF frequency: 303.875 MHz
    • 4.9" W x 3.8" H x 1.3" D
    Linear D-67L 1-Channel Latching Receiver Linear D-8C 8-Channel Receiver
    D67L / Product Number: SNR00030

    The Model D-67L 1-Channel Latching Receiver is designed for use in security systems and remote switching functions. Typical applications for the receiver include adding a wireless latching zone, a latching panic button for a hardwired alarm panel or creating a stand-alone annunication system. Each time a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will latch. Pressing the pushbutton on the side of the receiver will un-latch the relay.

    The Model D-67L is compatible with standard digital transmitters only.

    The output of the D-67L receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

    Features

    • Operates on 11-24 VDC or 12-16 VAC power
    • One channel
    • Standard digital format: 256 discrete codes
    • One form "C" relay output
    • One Amp contact rating @ 32 Volts AC/DC
    • Relay latches when transmitter is triggered, pushbutton un-latches the relay.
    • RF frequency: 303.875 MHz
    • 4.9" W x 3.8" H x 1.3" D
    Product Number: SNR00020A

    The Model D-8C 8-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs and improve system performance by eliminating RF interference problems present in multiple-receiver installations.

    The Model D-8C is compatible with standard digital transmitters only.

    The outputs of the D-8C receiver are solid state transistors. The receiver outputs for each channel are normally open and switch to ground when activated. The maximum current each output can switch to ground is 40 mA at 32 VDC.

    Features
     
    • Operates on 11-24 VDC or 12-16 VAC power
    • Current consumption: 10 mA standby, 40 mA operating
    • Eight independent channels
    • Standard digital format: 32 discrete codes
    • Solid state outputs
    • 40 mA maximum output rating @ 32 Volts VDC
    • RF frequency: 303.875 MHz
    • 4.9" W x 4.2" H x 1.3" D
    Linear DRQP 1-channel Gate Receiver Linear DX-12: 1-Channel Amplified Receiver
    Product Number: DNR00013P

    The DRQP 1-channel Gate Receiver is a high-sensitivity, short-range radio receiver that operates in conjunction with the 9-inch local antenna (supplied). The DRQP is designed for use with automatic gate operators or systems where a remote antenna is needed.

    Product Number: SNR00038

    The Model DX-12 1-Channel Amplified Receiver is designed for use in security systems and remote switching functions. The receiver is housed in a heavy-duty metal case to ensure reliable operation without detuning when installed inside another metal housing. It incorporates an RF pre-amplifier and can be used with the EXA-1000 or EXA-2000 remote antennas for improved range. Typical applications for the receiver include adding a wireless zone, a panic button, or creating a remote arm/disarm feature for a hardwired alarm panel. Each time a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will activate for four seconds.

    The Model DX-12 is compatible with standard digital transmitters only.

    The output of the DX-12 receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

    Features

    • Metal housing
    • RF pre-amplifier
    • Operates on 11-24 VDC or 12-16 VAC power
    • One channel
    • Standard digital format: 256 discrete codes
    • One form "C" relay output
    • One Amp contact rating @ 32 Volts AC/DC
    • Four second relay activation time
    • RF frequency: 303.875 MHz
    • 5.5" W x 3.8" H x 1.5" D
    Linear DXR-701 1-Channel Receiver Linear DXR-702: 2-Channel Receiver
    LN-DXR701 / Product Number: SNR00148

    The Model DXR-701 is a digital receiver with an isolated relay output designed for use with Linearís DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the relay output activates. The relay has four optional output configurations.

    In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other device. A transmitter is used to activate or control the device. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather resistant non-metallic housing.

    The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique codes, so no field coding is required. Receivers must be programmed to the transmitterís code before system testing and operation. Up to 32 transmitters can be programmed into the receiverís memory. The memory is retained, even without power.

    The unit can be powered from a 11-17 VDC or 12-16 VAC power source. The relayís normally open and normally closed contacts can switch up to 1 amp at 24 volts AC/DC.

    Cutting jumpers select how the relay activates. The factory setting causes the relay to engage for four seconds each activation. Optionally, the relay can be set to engage for one second, toggle on with one activation then off with the next, or latch engaged until reset by pressing the program button.

    A nine-inch wire lead serves as the receiverís antenna. The red program indicator lights during RF reception. The installer can verify that signals are being sent from transmitters and diagnose interference problems by viewing the indicator. The indicator also lights during memory programming/erasing and flashes to count the number of transmitters in memory.

    Features

    • 32 transmitter capacity
    • RF activity indicator
    • Quick-learn programming
    • Operates on 11-17 VDC or 12-16 VAC power
    • One channel
    • DX format
    • One form "C" relay output
    • One Amp contact rating @ 24 Volts AC/DC
    • Selectable relay activation time
    • Current consumption: 25 mA standby, 60 mA operating @ 12 VDC
    • RF frequency: 315 MHz
    • 5.5" W x 4.0" H x 1.25" D
    DXR702 / LN-DXR702

    Product Number: SNR00149

    The DXR-702 is a two-channel digital receiver with two isolated relay outputs designed for use with Linearís DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate relay output activates. The relays have four optional output configurations. When the relays are set to latch, the receiver outputs will follow the open/close door status sent from DXT-31 door/window transmitters.

    In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather resistant non-metallic housing.

    The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique codes, so no field coding is required. For versatility, any transmitter can be programmed into any receiver channel. Receivers must be programmed to the transmitterís code before system testing and operation. Up to 32 transmitters maximum can be programmed into the receiver. The transmitters can be split in any number between the two receiver channels.

    Receiver channel two is a special channel. If channel two memory is empty, with no transmitters programmed into it, it will report low battery signals from any channel one transmitters capable of sending them. When a low battery transmission is received, the channel two relay will latch, regardless of how the option jumpers are set. The relay will remain engaged until the channel two program button is pressed. The low transmitter batteries should be replaced before resetting the relay.

    The unit can be powered from a 11-17 VDC or 12-16 VAC power source. The relaysí normally open and normally closed contacts can switch up to 1 amp at 24 volts AC/DC.

    Cutting jumpers select how the relays activate. Four settings are possible. Both relays will function with the same option. The factory setting causes the relays to engage for four seconds each activation. Optionally, the relays can be set to engage for one second, toggle on with one activation then off with the next, or latch engaged for door status or until reset by pressing the program button.

    A nine-inch wire whip antenna screws into the receiverís antenna connector. Optionally, a remote antenna (Model EXA-1000) can be connected to the receiver for greater radio range. The red program indicator lights during RF reception. The installer can verify that signals are being sent from transmitters and diagnose interference problems by viewing the indicator. The indicator also lights during memory programming/erasing and flashes to count the number of transmitters in memory.

    Features

    • 32 transmitter capacity
    • RF activity indicator
    • Quick-learn programming
    • Operates on 11-17 VDC or 12-16 VAC power
    • Two channels
    • Low transmitter battery reporting
    • DX format
    • Two form "C" relay outputs
    • One Amp contact rating @ 24 Volts AC/DC
    • Selectable relay activation time
    • Current consumption: 25 mA standby, 90 mA operating @ 12 VDC
    • RF frequency: 315 MHz
    • 5.5" W x 4.0" H x 1.25" D
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please