|
|
|
|
|
|
|
|
|
|
1-channel 110V Gate Receiver Product Number: MCS109920 Features For use inside metal enclosures and in other applications requiring stronger signal reception Antenna with coaxial connector supplied 1 amp output @ 30 Vac maximum on relay contacts 115 Vac, transformer input (included) Frequency: 300 MHz Codes: 1,024 (set by dip switches) Dimensions: 5.25 x 3.625 x 1.5 inchesADI# LN-MCS109920
|
Product Number: MCS302101 Features - For any application requiring two channels in one location - 512 codes each channel
- Up-down, open-emergency-stop, and other functions
- For heavy-duty operation
- Cabinet meets NEMA 13, JIC specs
- Two-channel relay output, N/O, N/C, Common - rated 1 amp @ 30 Vac max
- Power: 24 Vac 10% power
- Frequency: 300 MHz
- Codes: 1,024 total (set by dip switches); 512 codes each of two channels
- Dimensions: 6 x 8 x 4 inches
|
|
|
|
|
|
|
|
|
|
|
|
|
SNR00009A The Model D-2R 2-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs and improve system performance by eliminating RF interference problems present in multiple-receiver installations.
The Model D-2R is compatible with standard digital transmitters only.
The outputs of the D-2R receiver are isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts for each channel. The current rating of each relay output is 1 amp at 32 volts maximum. Features - Operates on 11-24 VDC or 12-16 VAC power
- Current consumption: 15 mA standby, 60 mA operating
- Two independent channels
- Standard digital format: 64 discrete codes
- Two form "C" relay outputs
- One Amp contact rating @ 32 Volts AC/DC
- RF frequency: 303.875 MHz
- 4.9" W x 4.2" H x 1.3" D
|
Product Number: SNR00017A The Model D-4R 4-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs and improve system performance by eliminating RF interference problems present in multiple-receiver installations. The Model D-4R is compatible with standard digital transmitters only. The outputs of the D-4R receiver are isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts for each channel. The current rating of each relay output is 1 amp at 32 volts maximum.
Features Operates on 11-24 VDC or 12-16 VAC power Current consumption: 15 mA standby, 60 mA operating Four independent channels Standard digital format: 64 discrete codes Four form "C" relay outputs One Amp contact rating @ 32 Volts AC/DC RF frequency: 303.875 MHz 4.9" W x 4.2" H x 1.3" D
|
|
|
|
|
|
|
|
|
|
|
|
|
D-67: 1-Channel Receiver Product Number: SNR00032 The Model D-67 1-Channel Receiver is designed for use in security systems and remote switching functions. Typical applications for the receiver include adding a wireless zone, a panic button, or creating a remote arm/disarm feature for a hardwired alarm panel. Each time a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will activate for four seconds.
The Model D-67 is compatible with standard digital transmitters only.
The output of the D-67 receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum. Features - Operates on 11-24 VDC or 12-16 VAC power
- One channel
- Standard digital format: 256 discrete codes
- One form "C" relay output
- One Amp contact rating @ 32 Volts AC/DC
- Four second relay activation time
- RF frequency: 303.875 MHz
- 4.9" W x 3.8" H x 1.3" D
|
D67F / Product Number: SNR00035 The Model D-67F 1-Channel Alternating Relay Receiver is designed for use in security systems and remote switching functions. A typical application for the receiver is creating a remote arm/disarm feature for a hardwired alarm panel. When a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will latch. The next time a transmitter is triggered, the receiver's relay will un-latch.
The Model D-67F is compatible with standard digital transmitters only.
The output of the D-67F receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum. Features - Operates on 11-24 VDC or 12-16 VAC power
- One channel
- Standard digital format: 256 discrete codes
- One form "C" relay output
- One Amp contact rating @ 32 Volts AC/DC
- Alternating relay output; transmit to latch, transmit to un-latch
- RF frequency: 303.875 MHz
- 4.9" W x 3.8" H x 1.3" D
|
|
|
|
|
|
|
|
|
|
|
|
|
D67L / Product Number: SNR00030 The Model D-67L 1-Channel Latching Receiver is designed for use in security systems and remote switching functions. Typical applications for the receiver include adding a wireless latching zone, a latching panic button for a hardwired alarm panel or creating a stand-alone annunication system. Each time a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will latch. Pressing the pushbutton on the side of the receiver will un-latch the relay.
The Model D-67L is compatible with standard digital transmitters only.
The output of the D-67L receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum. Features - Operates on 11-24 VDC or 12-16 VAC power
- One channel
- Standard digital format: 256 discrete codes
- One form "C" relay output
- One Amp contact rating @ 32 Volts AC/DC
- Relay latches when transmitter is triggered, pushbutton un-latches the relay.
- RF frequency: 303.875 MHz
- 4.9" W x 3.8" H x 1.3" D
|
Product Number: SNR00020A The Model D-8C 8-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs and improve system performance by eliminating RF interference problems present in multiple-receiver installations.
The Model D-8C is compatible with standard digital transmitters only.
The outputs of the D-8C receiver are solid state transistors. The receiver outputs for each channel are normally open and switch to ground when activated. The maximum current each output can switch to ground is 40 mA at 32 VDC. Features
- Operates on 11-24 VDC or 12-16 VAC power
- Current consumption: 10 mA standby, 40 mA operating
- Eight independent channels
- Standard digital format: 32 discrete codes
- Solid state outputs
- 40 mA maximum output rating @ 32 Volts VDC
- RF frequency: 303.875 MHz
- 4.9" W x 4.2" H x 1.3" D
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Number: DNR00013P The DRQP 1-channel Gate Receiver is a high-sensitivity, short-range radio receiver that operates in conjunction with the 9-inch local antenna (supplied). The DRQP is designed for use with automatic gate operators or systems where a remote antenna is needed.
|
Product Number: SNR00038 The Model DX-12 1-Channel Amplified Receiver is designed for use in security systems and remote switching functions. The receiver is housed in a heavy-duty metal case to ensure reliable operation without detuning when installed inside another metal housing. It incorporates an RF pre-amplifier and can be used with the EXA-1000 or EXA-2000 remote antennas for improved range. Typical applications for the receiver include adding a wireless zone, a panic button, or creating a remote arm/disarm feature for a hardwired alarm panel. Each time a transmitter is triggered with a digital code matching the receiver's digital code, the receiver's relay will activate for four seconds.
The Model DX-12 is compatible with standard digital transmitters only.
The output of the DX-12 receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver's power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum. Features - Metal housing
- RF pre-amplifier
- Operates on 11-24 VDC or 12-16 VAC power
- One channel
- Standard digital format: 256 discrete codes
- One form "C" relay output
- One Amp contact rating @ 32 Volts AC/DC
- Four second relay activation time
- RF frequency: 303.875 MHz
- 5.5" W x 3.8" H x 1.5" D
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible Local Antenna with F-Conn Model Number: LA Product Number: AAE00008
|
Product Number: DNR00073 The MegaCode series of digital receivers are wireless radio controls designed for use with automatic gate openers. The MegaCode radio format provides unparalleled security. The transmitter and receiver can be programmed to more than a million different codes.
Features Activates one gate or device Stores up to 40 transmitter codes Supplied with F-connector and whip antenna Mounting bracket supplied Power: 24 Vac/Vdc Frequency: 318 MHz Codes: 1,000,000+ (factory precoded) Memory: storage for up to 40 transmitters Dimensions: 5.5 x 1.25 x 4 inchesADI# LN-MDRG
|
|
|
