The DXT-23 3-Button, 4-Channel Handheld Transmitter is a battery
powered portable transmitter designed for use with Linear’s DX Format
receivers. Each transmitter can be used in a limitless number of
wireless remote control applications. Pressing a button on the
transmitter sends a digitally coded wireless signal to its companion
receiver.
The DXT-23 is a three-button, four-code transmitter. Pressing either of
the transmitter’s front buttons sends codes one and two. Pressing the
small button on the transmitter’s top sends code three. Pressing both
front buttons together sends code four.
The digital DX code format features over a million possible codes. The
DX transmitters are precoded at the factory to unique codes, so no field
coding is required. The multi-button transmitters send variations of
their preset codes depending on which buttons are pressed. Transmitters
can send a signal for up to 10 seconds per activation.
For versatility, any transmitter code can be programmed into any
receiver channel. Receivers must be programmed to the transmitter code
before system testing and operation.
The DXT-23 is powered by two 3-Volt #2032 lithium batteries with an
expected battery life of up to 5 years. The red test/operate indicator
lights during operation and can be viewed from the front or the top of
the unit. The indicator will glow dimly during operation when the
batteries get low. It will stop lighting altogether during operation
when the batteries are below 4.5 volts.
A removable pocket clip and belt clip are provided for each transmitter.
Either can be attached to the back of the transmitter allowing the unit
to be clipped to shirt pocket or slid onto a belt.
The top button on each transmitter can be hidden with the top button cover supplied with each unit.
Features
- Unique "Extra" top button
- High visibility operate LED
- Two type 2032 lithium batteries supplied
- Pocket/belt clip supplied
- DX format
- RF frequency: 315 MHz
- 1.6" W x 4.2" H x 0.8" D
- Order number: SNT00377
