You are here: Home > Shop Brands > Linear > Building and Gated Community Access Control
We found 60 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Building and Gated Community Access Control

  Accessories
  Multi Door Controllers
  Residential Telephone Entry
  Single Door Controllers
  Telephone Entry
  Telephone Entry with Access Control
  Transmitters
A complete line of controllers, radio receivers, transmitters, and accessories for configuring and upgrading access control systems. Capabilities include telephone entry systems, radio-based products for remote "keyless entry", "panic" alarms and greater
Accessories
Accessories
Multi Door Controllers
Linear's Multi-Door controllers can be used in traditional stand alone modes supporting up to 4 doors or gates. In addition, the multi-door controllers can be used to expand installations containing Linear's Telephone Entry systems. Up to 8 controllers, s
Residential Telephone Entry
The RE-1 and RE-2 are residential and commercial grade telephone entry systems that allows the user to communicate with visitors at a remote location, where access is granted via the users touchtone telephone. In addition to its innovative design, they bo
Single Door Controllers
Linear's single door controller entry systems are an excellent way to control access at a single entry point.
Telephone Entry
Model AE-500 is a Commercial Telephone Entry System for full access control of one or two portals. Ideal for apartments, condominiums, dormitories, hospitals, and other commercial sites it performs all the functions of a telephone entry system - it calls
Telephone Entry with Access Control
Linears Telephone Entry Systems combine telephone entry with full-featured access control, including keyless entry and panic functions. They are extremely easy to operate, making them ideal for a wide range of applications, including apartments, condo com
Transmitters
Transmitters
Sort By:
Page of 5
Linear  AM3Plus  4-Portal Access Controller - ALSO LISTED AS #ACP00950 Linear MDT-1AB  1-Channel Block Coded Visor Transmitter - ALSO LISTED AS #ACP00721
4 DOOR ACCESS CONTROL PANEL W/MEMORY CAB CARD RDRWITH MEMORY INDOOR CABINET CARD READER INTERFACE

REPLACES LN-AM3

Product Number: ACP00950

The Model AM3Plus 4-Portal Access Controller is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

Housed in a lockable, plastic enclosure, the AM3Plus features a 2-digit LED display, nine status indicators, four relay indicators with four relay activation pushbuttons. Three programming buttons, a reset button, and a power indicator are present. The enclosure is monitored with a magnetic tamper switch.

The system controls its four output relays by responding to various input devices that react to proximity cards, transmitters, and entry codes. The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

Access is granted or denied depending on the current users authorization to gain access and system settings that control groups of users or all users. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

For easy programming, the AM3Plus contains Linear's built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AM3Plus is also compatible with Linears powerful AccessBase2000 dedicated access control PC software.

The AM3Plus is network ready. AM3Plus units can be interconnected with Linears AE1000Plus and AE2000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AM3Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.

Two sets of Wiegand inputs are available for connection to 26, 30, or 31-bit Wiegand devices (card readers, etc.). Two sets of PBUS inputs are available for connection to Linears line of remote accessories.
Capabilities with AXNET Programming
Programming using any PC and Internet browser software
Up to 2,000 cardholders
Up to 24 card blocks with up to 1,600 cards each (38,400 total)
Up to 2,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total)
Up to 2,000 individually enrolled transmitters
Up to 2,000 key codes
Up to 2,000 telephone directory codes (when networked with AE1000Plus or AE2000Plus telephone entry system)
2,500 event log entries per unit
Up to 8 access time zones
Up to 4 PBUS devices per unit

Capabilities with AccessBase2000 Programming
Programming using a dedicated PC and AccessBase2000 software
Up to 10,000 cardholders grouped in sets
Up to 24 card blocks with up to 1,900 cards each (45,600 total)
Up to 20,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total)
Up to 20,000 individually enrolled transmitters
Up to 20,000 entry codes for cardholders
Up to 10,000 telephone directory codes for cardholders (when networked with AE1000Plus, AE-1000, AE2000Plus, or AE-2000 telephone entry system)
10,000 event log entries per unit
Up to 31 access time zones
Up to 6 PBUS devices per unit

Features

  • Full control of 4 doors; each supporting request to exit and door status monitoring
  • Direct input for 2 card readers; add AM-CRI's for more
  • Local programming using a PC
  • Remote programming using a PC (optional Model ACM-1 modem required)
  • Relay auto lock/unlock schedules
  • Automatic door relock when door sense input is used
  • Extensive ESD and lightning protection of all inputs and outputs
  • Cabinet tamper switch included; tamper events are tracked in the event log.
  • All data memory is non-volatile FLASH with data retention in excess of 10 years
  • RF frequency: 318 MHz
  • 11.5" W x 12.5" H x 4" D

    Accessories for use with the AM3Plus: These models are ACCESSORIES for product number: ACP00950
    AM-RRR Remote Radio Receiver
    CAB-3 Metal Outdoor Cabinet
    AM-MIO Expansion Interface
    ACM-1 ACM-1: Replacement Modem

    Models compatible with the AM3Plus: These models are COMPATIBLE with product number: ACP00950
    AE2000Plus Commercial Telephone Entry System with Access Control
    AE1000Plus Commercial Telephone Entry System with Access Control

  • Product Number: ACP00721

    The Model MDT-1B 1-channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MDT-1B is a single-channel device. Pressing either the round button on the transmitter's front, or the small button on the transmitter's top will send the same signal. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Features

    • Compatible with all Linear access receivers and controllers
    • Superior transmission range
    • Factory programmed MegaCode format supports over 1,000,000 codes
    • Unique "Extra" top button
    • High visibility operate LED
    • Visor clip included
    • Two type 2032 lithium batteries supplied
    • MegaCode format
    • RF frequency: 318 MHz
    • 1.6" W x 4.2" H x 0.8" D
    Linear A2C/DB9 Serial Port Cable Linear ACM-1 Replacement Modem
    Product Number: ACP00415

    9-pin for connecting AM/II, AE-1, or AE-2 to a computer's serial port

    Product Number: ACP00905

    Replacement telephone communications interface modem for AM-3, AE-1000, and AE-2000.

    Features
    • Standard on AE-1000 and AE-2000
    • Field upgradeable option for AM-3
    Linear ACT-21B 1-channel Block Coded Key Ring Transmitter -  ALSO LISTED AS  #ACP00615 Linear ACT-22B 3-channel Block Coded Key Ring Transmitter
    Product Number: ACP00615

    The Model ACT-21B 1-channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-21B is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
    Features

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 1616 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • The Model ACT-22B 3-Channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-22B is a three-channel device. Pressing the transmitter's left or right front button sends channel one or two. Pressing both buttons sends channel three. Lithium batteries with a five-year service life are included and the transmitter is supplied with a quick-disconnect key ring. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
    Features

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 1616 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • Linear ACT-31B 1-channel Block Coded Key Ring Transmitter - SOLD IN LOTS OF 10 Linear ACT-31C: 1-Channel Custom Block Coded Key Ring Transmitter
    Product Number: ACP00879

    The Model ACT-31B 1-Channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-31B is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Features

    • Compatible with all Linear access receivers and controllers
    • Supplied with quick-disconnect key ring
    • Factory programmed MegaCode format supports over 1,000,000 codes
    • Two type 2016 lithium batteries supplied
    • RF frequency: 318 MHz
    • 1.25" W x 2.25" H x 0.48" D
    The Model ACT-31C/ACT-34C are two custom block coded key ring transmitters designed for use with Linear's access control products. Both devices are supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously. Custom block coded transmitters are factory programmed to your choice of sequential transmitter ID codes.

    1-Channel Custom Block Coded Key Ring Transmitter Model Number: ACT-31C

    Product Number: ACP00939

    The Model ACT-31C 1-Channel Custom Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-31C is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Custom block coded transmitters are factory programmed to your choice of sequential transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can also be selected to further customize the system.

    Features

  • Available in factory programmed blocks of transmitters with your choice of starting block code number
  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 2016 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • Minimum order quantity 10 transmitters
  • Linear ACT-31D: 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag - ACP00954 - LN-ACT31D Linear ACT-34B 4-channel Block Coded Key Ring Transmitter
    The Model ACT-31D 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag is designed for use with Linear's access control products. The Model ACT-31D is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The ACT-31D also contains a 26-bit Wiegand proximity tag programmed to the same block code as the transmitter. The tag is compatible with the Model AM-PR Proximity Reader. Waving the transmitter near the reader will request access from the system.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Product Number: ACP00872

    The Model ACT-34B 4-Channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-34B is a four-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Features

    • Compatible with all Linear access receivers and controllers
    • Supplied with quick-disconnect key ring
    • Factory programmed MegaCode format supports over 1,000,000 codes
    • Two type 2016 lithium batteries supplied
    • RF frequency: 318 MHz
    • 1.25" W x 2.25" H x 0.48" D
    Linear ACT-34C: 4-Channel Custom Block Coded Key Ring Transmitter Linear ACT-34D: 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag - ACP00955
    4-Channel Custom Block Coded Key Ring Transmitter

    Model Number: ACT-34C

    Product Number: ACP00940

    The Model ACT-34C 4-Channel Custom Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-34C is a four-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Custom block coded transmitters are factory programmed to your choice of sequential transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can also be selected to further customize the system.

    Features

  • Available in factory programmed blocks of transmitters with your choice of starting block code number
  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 2016 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • Minimum order quantity 10 transmitters
  • The Model ACT-34D 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag is designed for use with Linear's access control products. The Model ACT-34D is a four-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The ACT-34D also contains a 26-bit Wiegand proximity tag programmed to the same block code as the transmitter. The tag is compatible with the Model AM-PR Proximity Reader. Waving the transmitter near the reader will request access from the system.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please