You are here: Home > Shop Brands > Linear > Building and Gated Community Access Control > Multi Door Controllers
We found 18 results matching your criteria.
Linear's Multi-Door controllers can be used in traditional stand alone modes supporting up to 4 doors or gates. In addition, the multi-door controllers can be used to expand installations containing Linear's Telephone Entry systems. Up to 8 controllers, s
Sort By:
Page of 2
Linear  AM3Plus  4-Portal Access Controller - ALSO LISTED AS #ACP00950 Linear A2C/DB25 Serial Port Cable
4 DOOR ACCESS CONTROL PANEL W/MEMORY CAB CARD RDRWITH MEMORY INDOOR CABINET CARD READER INTERFACE

REPLACES LN-AM3

Product Number: ACP00950

The Model AM3Plus 4-Portal Access Controller is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

Housed in a lockable, plastic enclosure, the AM3Plus features a 2-digit LED display, nine status indicators, four relay indicators with four relay activation pushbuttons. Three programming buttons, a reset button, and a power indicator are present. The enclosure is monitored with a magnetic tamper switch.

The system controls its four output relays by responding to various input devices that react to proximity cards, transmitters, and entry codes. The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

Access is granted or denied depending on the current users authorization to gain access and system settings that control groups of users or all users. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

For easy programming, the AM3Plus contains Linear's built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AM3Plus is also compatible with Linears powerful AccessBase2000 dedicated access control PC software.

The AM3Plus is network ready. AM3Plus units can be interconnected with Linears AE1000Plus and AE2000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AM3Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.

Two sets of Wiegand inputs are available for connection to 26, 30, or 31-bit Wiegand devices (card readers, etc.). Two sets of PBUS inputs are available for connection to Linears line of remote accessories.
Capabilities with AXNET Programming
Programming using any PC and Internet browser software
Up to 2,000 cardholders
Up to 24 card blocks with up to 1,600 cards each (38,400 total)
Up to 2,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total)
Up to 2,000 individually enrolled transmitters
Up to 2,000 key codes
Up to 2,000 telephone directory codes (when networked with AE1000Plus or AE2000Plus telephone entry system)
2,500 event log entries per unit
Up to 8 access time zones
Up to 4 PBUS devices per unit

Capabilities with AccessBase2000 Programming
Programming using a dedicated PC and AccessBase2000 software
Up to 10,000 cardholders grouped in sets
Up to 24 card blocks with up to 1,900 cards each (45,600 total)
Up to 20,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total)
Up to 20,000 individually enrolled transmitters
Up to 20,000 entry codes for cardholders
Up to 10,000 telephone directory codes for cardholders (when networked with AE1000Plus, AE-1000, AE2000Plus, or AE-2000 telephone entry system)
10,000 event log entries per unit
Up to 31 access time zones
Up to 6 PBUS devices per unit

Features

  • Full control of 4 doors; each supporting request to exit and door status monitoring
  • Direct input for 2 card readers; add AM-CRI's for more
  • Local programming using a PC
  • Remote programming using a PC (optional Model ACM-1 modem required)
  • Relay auto lock/unlock schedules
  • Automatic door relock when door sense input is used
  • Extensive ESD and lightning protection of all inputs and outputs
  • Cabinet tamper switch included; tamper events are tracked in the event log.
  • All data memory is non-volatile FLASH with data retention in excess of 10 years
  • RF frequency: 318 MHz
  • 11.5" W x 12.5" H x 4" D

    Accessories for use with the AM3Plus: These models are ACCESSORIES for product number: ACP00950
    AM-RRR Remote Radio Receiver
    CAB-3 Metal Outdoor Cabinet
    AM-MIO Expansion Interface
    ACM-1 ACM-1: Replacement Modem

    Models compatible with the AM3Plus: These models are COMPATIBLE with product number: ACP00950
    AE2000Plus Commercial Telephone Entry System with Access Control
    AE1000Plus Commercial Telephone Entry System with Access Control

  • Product Number: ACP00417

    25-pin for connecting AM/II, AE-1, or AE-2 to a computer's serial port

    Linear A2C/DB9 Serial Port Cable Linear AM-CRI Card Reader Interface - ALSO LISTED AS #  ACP00717
    Product Number: ACP00415

    9-pin for connecting AM/II, AE-1, or AE-2 to a computer's serial port

    Product Number: ACP00717

    The AM-CRI card reader interface is designed for use with Linear's access control systems. The interface will support one or two 26-bit or 31-bit Wiegand input devices.

    If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI.

    Usually mounted near the readers, the AM-CRI interface connects to the control unit through a PBUS cable. Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven wire (two LEDs in reader) cable.
    Features

  • For equipping a Linear access control system with one or two Wiegand devices
  • Card Reader Interface can be used with up to two 26 or 31-Bit Wiegand input devices
  • Power is supplied by system controller or external source for locally powered readers
  • 4.45" W x 5.75" H x 1.5" D
  • Linear AM-KP Exterior Keypad Linear AM-MIO Expansion Interface

    Linear AM-KP Exterior Keypad


    Our Price : $167.49

    Product Number: ACP00520

    The Model AM-KP keypad is designed for use with Linear's access control systems. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy-to-read yellow graphics. Each key has a positive tactile click feel when pressed. An internal sounder signals when a key is pressed.

    The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate.

    An incandescent panel lamp lights the keypad for nighttime use. Red, green and yellow indicators show power, access and lockout conditions.

    The AM-KP is normally powered from the control, or it can be powered locally from a 12 VDC power supply. Robust static and lightning protection circuits safeguard the keypad's electronics.

    Features

    • For use outdoors or indoors
    • 1-to-8-digit user selectable access codes
    • Programmable downlighting
    • Separate LEDs for "power/access granted" and "locked out" indication
    • Pedestal or wall mounting
    • Cast aluminum, environmentally protected housing
    • Keylock secures keypad to mounting backplate
    • 4" W x 5.5" H x 3" D
    Product Number: ACP00561

    Input/output expansion interface for the AM-3, AE-1000, & AE-2000, six 5-amp control relays, eight sensing inputs, expandable up to 24 relay outputs and 32 sensing inputs by adding additional AM-RLM modules, plastic cabinet.

    Linear AM-PC Proximity Card - ALSO LISTED AS #ACP00739 Linear AM-PR Proximity Reader
    When ordering, customer must provide the facility code for the reader that these cards will be used with.

    Special Order Item

    Product Number: ACP00739

    Wiegand format proximity type access control card with a slot for attaching to a key ring, use with AM-PR proximity reader.
    Features

  • Passive operation
  • Low-cost
  • Durable
  • Product Number: ACP00740

    The Model AM-PR Proximity Reader is designed for use with Linear's access control systems. This close-range, reader works with either proximity tags or proximity cards. The AM-PR is rugged, rated for extreme weather, and vandal resistant.
    Features

  • Works with both proximity tags and proximity cards
  • Compatible with all Wiegand formats up to 40 bits
  • Weather resistant and vandal resistant
  • 4 to 6 inch read range
  • Supports up to 65,000 cards
  • Easy to install
  • Integral LED confirms when user access is granted
  • 1.6" W x 3.4" H x .6" D
  • Linear AM-RPR Remote Proximity Receiver Linear AM-RRR Remote Radio Receiver
    Product Number: ACP00560

    The Model AM-RPR Remote Proximity Receiver is designed for use with Linear's access control systems. The AM-RPR functions as a remote device that supplies localized radio reception.

    In a typical installation, the AM-RPR would be mounted in a plastic single-gang electrical box next to the controlled opening. When the user requires access, their transmitter must be activated within three inches of the AM-RPR faceplate. The ultra-short range of the AM-RPR allows placement of a unit by each controlled opening without the possibility of the transmitter being detected by the wrong receiver.

    A two-color indicator on the AM-RPR faceplate displays the receiver's status. The indicator lights red when the receiver is getting DC power from the system and turns green when access is granted to a transmitter.

    Features
    • Convenient, cost-effective, and reliable form of door or entrance control
    • 2-to-3-inch radio transmitter read range
    • Compatible with Linear radio-based access control systems
    • 2-color status LED indicates "power on" and "access granted"
    • Installs in a single-gang electrical box
    • Prevents transmitter from being detected by wrong receiver
    • 2.7" W x 4.5" H x 2" D
    Product Number: ACP00500

    The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception.

    Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver's connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the receiver's antenna connector with type RG-59 cable.

    An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receivers performance and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the incoming signals.

    The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements.

    Features

    • Provides extended range for radio-based access control system
    • Up to 500 foot radius radio coverage
    • Weather-resistant housing for outside or indoor mounting
    • Optional directional remote or omnidirectional remote antennas
    • Integral radio gain control for adjustment of radio range
    • 2-color status LEDs indicates "power on" and "access granted"
    • Radio LED detects transmission
    • Power supplied by access controller
    • Low voltage cable allows remote mounting without signal loss
    • RF frequency: 318 MHz
    • 4.25" W x 6.25" H x 2.5" D (without antenna)
    Linear CAB-1 Metal Indoor Cabinet Linear CAB-3 Metal Outdoor Cabinet
    Product Number: ACP00420

    Locking metal cabinet for AM/II or AM-3 for use in indoor applications, lock included.

    Product Number: ACP00913

    Locking NEMA 3R rated metal cabinet for AM/II or AM-3 for use in outdoor applications, lock included.
    Features

  • Exterior Cabinet
  • NEMA 3R rated
  • Provisions for padlock
  • ***Replaces the CAB-2
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please