You are here: Home > Shop Brands > Linear > Wireless Security Solutions > XTended Range > XTended Range Transmitters
We found 5 results matching your criteria.
Linear Developed XTended Range with flexibility and variety in mind, so users can tailor long-distance links to their needs remote monitoring, switching systems, networking, security, remote control. Different models and channel combinations can be mixed
Sort By:
Page of 1
Linear XT-1 1-Channel Stationary Mid-range Transmitter Linear XT-1H 1-Channel Handheld Mid-range Transmitter
Product Number: SST00083

The Model XT-1 1-Channel Stationary Mid-range Transmitter is designed for use in various wireless remote control applications. When triggered with an external switch, the Model XT-1 transmitter will send a 10 watt, 27.255 MHz, digital encoded, FSK modulated, signal to its companion receiver. The receiver will verify the digital code, activate its output, and trigger the remote device.

The XT-1 transmitter has full supervision capabilities. If the status option is selected, the XT-1 sends hourly status signals to its receiver. If these signals cease, the receiver will indicate trouble by activating its status output after four hours. Contact supervision allows the receiver's output to follow the transmitter's input, staying activated as long as the transmitter input is activated. Alternately, an auto-restore option can be selected, causing a momentary receiver output each time the transmitter is activated. Either a N/O or N/C input (jumper selectable) can trigger the transmitter.

Power for the XT-1 transmitter can come from an external regulated 12 VDC, 2-Amp power supply (Linear Model T-1224DC) or from a 12-volt battery. A 3-amp fuse protects the unit from reverse power polarity. The XT-1 draws about 15 mA standby, and about two amps during transmissions. If the power supply voltage drops below 10.5 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate.

Two antennas (sold separately) are available for the XT-1. The Model ANT-1A is an 7-inch rubber duck antenna for short range applications (less than 1 mile). The ANT-1A is supplied with a CON-180A (straight) connector to mate the antenna to the transmitter. For a right angle antenna mounting, use a CON-90A right-angle connector with the CON-180A. The Model ANT-2 is a 3-foot whip antenna for use in long range or difficult installations where more range from the XT-1 is required. A common 9-foot 1/4 wave CB whip antenna can also be used with the XT-1 for maximum range.

Two 8-position switches set the unit's system code. This code must be matched in the XT-1's receiver. There are 65,536 different system codes possible. The 6-position option switch selects the transmitter's channel, receiver's bank (for XR-16 receiver only), and options for status and auto-restore transmissions.

The transmitter is housed in a rugged weather-resistant metal enclosure with a sturdy SO-239 antenna connector and a water-tight wiring strain relief bushing. During transmissions, the red operation indicator (visible through a window on the case) lights. If the XT-1's input voltage is low, the indicator will blink during transmissions.
Features

  • Up to 10 miles of line-of-sight range
  • Over 64,000 Codes
  • RF transmit LED
  • Accepts N/O or N/C inputs
  • Complete RF supervision, field enabled
  • Fully supervised (loop status, low battery, link integrity)
  • Weather-Resistant Case
  • RF frequency: 27.255 MHz
  • 4.25" W x 6.25" H x 2.5" D
  • Product Number: SNT00395

    The Model XT-1H 1-Channel Handheld Mid-range Transmitter is designed for use in various wireless remote control applications. When activated, the XT-2H portable transmitter will send a 2 watt, 27.255 MHz, digital encoded, FSK modulated, signal to their companion receiver. The receiver will verify the digital code, activate its output, and trigger the remote device.

    The Model XT-1H is a one-button, single channel transmitter. Each transmission is limited to a maximum of 30 seconds duration.

    The XT-1H portable transmitter is powered by two 9-volt alkaline batteries in series, supplying 18 volts. During transmissions, the red operation indicator will light (visible through a window next to the antenna). If the transmitter's battery voltage is low, the indicator will blink during transmissions. The XT-1H transmitter has battery supervision capabilities. If the combined battery voltage drops below 12 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate. The test button next to the indicator sends a test transmission when pressed.

    Two 8-position switches set the unit's system code. This code must be matched in the transmitter's companion receiver. There are 65,536 different system codes possible. The 4-position option switch selects the transmitter's channel and the receiver's bank (for the XR-16 receiver only).

    Each transmitter is provided with a 6-inch rubber duck antenna and a removable belt clip.

    Features
    • Up to two miles of line-of-sight range
    • Over 64,000 Codes
    • Includes belt clip
    • Powered by two 9-volt batteries (included)
    • RF frequency: 27.255 MHz
    • 2.375" W x 12.25" H x 1.375" D
    Linear XT-2H 2-Channel Handheld Mid-range Transmitter Linear XT-4 4-Channel Stationary Mid-range Transmitter
    Product Number: SNT00396

    The Model XT-2H 2-Channel Handheld Mid-range Transmitter is designed for use in various wireless remote control applications. When activated, the XT-2H portable transmitter will send a 2 watt, 27.255 MHz, digital encoded, FSK modulated, signal to their companion receiver. The receiver will verify the digital code, activate its output, and trigger the remote device.

    The Model XT-2H is a two-button transmitter with two operating modes. In standard mode, the XT-2H is a two channel device, pressing the left button sends channel one; the right button sends channel two; both buttons sends channels one and two. In lockout mode, the XT-2H will only send a signal (on the channel selected) when both buttons are pressed. Alternate faceplate are supplied with the transmitter (2-button lockout faceplate shown above). Each transmission is limited to a maximum of 30 seconds duration.

    The XT-2H portable transmitter is powered by two 9-volt alkaline batteries in series, supplying 18 volts. During transmissions, the red operation indicator will light (visible through a window next to the antenna). If the transmitter's battery voltage is low, the indicator will blink during transmissions. The XT-2H transmitter has battery supervision capabilities. If the combined battery voltage drops below 12 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate. The test button next to the indicator sends a test transmission when pressed.

    Two 8-position switches set the unit's system code. This code must be matched in the transmitter's companion receiver. There are 65,536 different system codes possible. The 4-position option switch selects the transmitter's channel (in 2-button lockout mode only) and the receiver's bank (for the XR-16 receiver only).

    Each transmitter is provided with a 6-inch rubber duck antenna and a removable belt clip.

    Features

    • Up to two miles of line-of-sight range
    • Over 64,000 Codes
    • Includes belt clip
    • Faceplate supplied for multi-channel and 2-button lockout operation
    • Powered by two 9-volt batteries (included)
    • RF frequency: 27.255 MHz
    • 2.375" W x 12.25" H x 1.375" D
    Product Number: SST00084

    The Model XT-4 4-Channel Stationary Mid-range Transmitter is designed for use in various wireless remote control applications. When triggered with an external switch, the Model XT-4 transmitter will send a 10 watt, 27.255 MHz, digital encoded, FSK modulated, signal to its companion receiver. The receiver will verify the digital code, activate its output, and trigger the remote device.

    The XT-4 transmitter has full supervision capabilities. If the status option is selected, the XT-4 sends hourly status signals to its receiver. If these signals cease, the receiver will indicate trouble by activating its status output after four hours. Contact supervision allows the receiver's outputs to follow the transmitter's inputs, staying activated as long as each transmitter input is activated. Alternately, an auto-restore option can be selected, causing a momentary receiver output each time any transmitter input is activated. Each input can be configured for either N/O or N/C contacts (switch selectable).

    Power for the XT-4 transmitter can come from an external regulated 12 VDC power supply (Linear Model T-1224DC) or from a 12-volt battery. A 3-amp fuse protects the unit from reverse power polarity. The XT-4 draws about 15 mA standby, and about two amps during transmissions. If the power supply voltage drops below 10.5 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate.

    Two antennas (sold separately) are available for the XT-4. The Model ANT-1A is an 7-inch rubber duck antenna for short range applications (less than 1 mile). The ANT-1A is supplied with a CON-180A (straight) connector to mate the antenna to the transmitter. For a right angle antenna mounting, use a CON-90A right-angle connector with the CON-180A. The Model ANT-2 is a 3-foot whip antenna for use in long range or difficult installations where more range from the XT-4 is required. A common 9-foot 1/4 wave CB whip antenna can also be used with the XT-4 for maximum range.

    Two 8-position switches set the unit's system code. This code must be matched in the XT-4's receiver. There are 65,536 different system codes possible. The 4-position option switch selects the receiver's bank (for XR-16 receiver only), and options for status and auto-restore transmissions.

    The transmitter is housed in a rugged weather-resistant metal enclosure with a sturdy SO-239 antenna connector and a water-tight wiring strain relief bushing. During transmissions, the red operation indicator (visible through a window on the case) lights. If the XT-4's input voltage is low, the indicator will blink during transmissions.

    Features

    • Up to 10 miles of line-of-sight range
    • Over 64,000 codes
    • RF transmit LED
    • Accepts N/O or N/C inputs
    • Complete RF supervision, field enabled
    • Fully supervised (loop status, low battery, link integrity)
    • Weather-Resistant Case
    • RF frequency: 27.255 MHz
    • 4.25" W x 6.25" H x 2.5" D
    Linear XT-4H 4-Channel Handheld Mid-range Transmitter
    Product Number: SNT00397

    The Model XT-4H 4-Channel Handheld Mid-range Transmitter is designed for use in various wireless remote control applications. When activated, the XT-4H portable transmitters will send a 2 watt, 27.255 MHz, digital encoded, FSK modulated, signal to their companion receiver. The receiver will verify the digital code, activate its output, and trigger the remote device.

    The Model XT-4H is a four-button, four channel transmitter. Each transmission is limited to a maximum of 30 seconds duration.

    The XT-4H portable transmitter is powered by two 9-volt alkaline batteries in series, supplying 18 volts. During transmissions, the red operation indicator will light (visible through a window next to the antenna). If the transmitter's battery voltage is low, the indicator will blink during transmissions. The XT-4H transmitter has battery supervision capabilities. If the combined battery voltage drops below 12 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate. The test button next to the indicator sends a test transmission when pressed.

    Two 8-position switches set the unit's system code. This code must be matched in the transmitter's companion receiver. There are 65,536 different system codes possible. The option switch selects the receiver's bank (for the XR-16 receiver only).

    Each transmitter is provided with a 6-inch rubber duck antenna and a removable belt clip.

    Features

    • Up to two miles of line-of-sight range
    • Over 64,000 Codes
    • Includes belt clip
    • Powered by two 9-volt batteries (included)
    • RF frequency: 27.255 MHz
    • 2.375" W x 12.25" H x 1.375" D
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please