You are here: Home > Shop Brands > Linear > Building and Gated Community Access Control > Accessories
We found 34 results matching your criteria.
Accessories
Sort By:
Page of 3
Linear A2C/DB25 Serial Port Cable Linear A2C/DB9 Serial Port Cable
Product Number: ACP00417

25-pin for connecting AM/II, AE-1, or AE-2 to a computer's serial port

Product Number: ACP00415

9-pin for connecting AM/II, AE-1, or AE-2 to a computer's serial port

Linear ACM-1 Replacement Modem Linear AE-MP Stainless Steel Mounting Plate
Product Number: ACP00905

Replacement telephone communications interface modem for AM-3, AE-1000, and AE-2000.

Features
  • Standard on AE-1000 and AE-2000
  • Field upgradeable option for AM-3
Product Number: ACP00730

Mounting adapter for installing AE-1 or AE-2 system on a gooseneck post or in an outdoor location.

Linear AM-CRI Card Reader Interface - ALSO LISTED AS #  ACP00717 Linear AM-KP Exterior Keypad

Linear AM-KP Exterior Keypad


Our Price : $167.49

Product Number: ACP00717

The AM-CRI card reader interface is designed for use with Linear's access control systems. The interface will support one or two 26-bit or 31-bit Wiegand input devices.

If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI.

Usually mounted near the readers, the AM-CRI interface connects to the control unit through a PBUS cable. Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven wire (two LEDs in reader) cable.
Features

  • For equipping a Linear access control system with one or two Wiegand devices
  • Card Reader Interface can be used with up to two 26 or 31-Bit Wiegand input devices
  • Power is supplied by system controller or external source for locally powered readers
  • 4.45" W x 5.75" H x 1.5" D
  • Product Number: ACP00520

    The Model AM-KP keypad is designed for use with Linear's access control systems. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy-to-read yellow graphics. Each key has a positive tactile click feel when pressed. An internal sounder signals when a key is pressed.

    The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate.

    An incandescent panel lamp lights the keypad for nighttime use. Red, green and yellow indicators show power, access and lockout conditions.

    The AM-KP is normally powered from the control, or it can be powered locally from a 12 VDC power supply. Robust static and lightning protection circuits safeguard the keypad's electronics.

    Features

    • For use outdoors or indoors
    • 1-to-8-digit user selectable access codes
    • Programmable downlighting
    • Separate LEDs for "power/access granted" and "locked out" indication
    • Pedestal or wall mounting
    • Cast aluminum, environmentally protected housing
    • Keylock secures keypad to mounting backplate
    • 4" W x 5.5" H x 3" D
    Linear AM-MIO Expansion Interface Linear AM-PC Proximity Card - ALSO LISTED AS #ACP00739
    Product Number: ACP00561

    Input/output expansion interface for the AM-3, AE-1000, & AE-2000, six 5-amp control relays, eight sensing inputs, expandable up to 24 relay outputs and 32 sensing inputs by adding additional AM-RLM modules, plastic cabinet.

    When ordering, customer must provide the facility code for the reader that these cards will be used with.

    Special Order Item

    Product Number: ACP00739

    Wiegand format proximity type access control card with a slot for attaching to a key ring, use with AM-PR proximity reader.
    Features

  • Passive operation
  • Low-cost
  • Durable
  • Linear AM-PR Proximity Reader Linear AM-RLM Input/Output Expansion Module
    Product Number: ACP00740

    The Model AM-PR Proximity Reader is designed for use with Linear's access control systems. This close-range, reader works with either proximity tags or proximity cards. The AM-PR is rugged, rated for extreme weather, and vandal resistant.
    Features

  • Works with both proximity tags and proximity cards
  • Compatible with all Wiegand formats up to 40 bits
  • Weather resistant and vandal resistant
  • 4 to 6 inch read range
  • Supports up to 65,000 cards
  • Easy to install
  • Integral LED confirms when user access is granted
  • 1.6" W x 3.4" H x .6" D
  • Product Number: ACP00562

    Add in expansion module for AM-MIO, six 5-amp control relays, eight sensing inputs, status indicators, manual activation pushbuttons

    Linear AM-RPR Remote Proximity Receiver Linear AM-RRR Remote Radio Receiver
    Product Number: ACP00560

    The Model AM-RPR Remote Proximity Receiver is designed for use with Linear's access control systems. The AM-RPR functions as a remote device that supplies localized radio reception.

    In a typical installation, the AM-RPR would be mounted in a plastic single-gang electrical box next to the controlled opening. When the user requires access, their transmitter must be activated within three inches of the AM-RPR faceplate. The ultra-short range of the AM-RPR allows placement of a unit by each controlled opening without the possibility of the transmitter being detected by the wrong receiver.

    A two-color indicator on the AM-RPR faceplate displays the receiver's status. The indicator lights red when the receiver is getting DC power from the system and turns green when access is granted to a transmitter.

    Features
    • Convenient, cost-effective, and reliable form of door or entrance control
    • 2-to-3-inch radio transmitter read range
    • Compatible with Linear radio-based access control systems
    • 2-color status LED indicates "power on" and "access granted"
    • Installs in a single-gang electrical box
    • Prevents transmitter from being detected by wrong receiver
    • 2.7" W x 4.5" H x 2" D
    Product Number: ACP00500

    The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception.

    Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver's connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the receiver's antenna connector with type RG-59 cable.

    An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receivers performance and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the incoming signals.

    The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements.

    Features

    • Provides extended range for radio-based access control system
    • Up to 500 foot radius radio coverage
    • Weather-resistant housing for outside or indoor mounting
    • Optional directional remote or omnidirectional remote antennas
    • Integral radio gain control for adjustment of radio range
    • 2-color status LEDs indicates "power on" and "access granted"
    • Radio LED detects transmission
    • Power supplied by access controller
    • Low voltage cable allows remote mounting without signal loss
    • RF frequency: 318 MHz
    • 4.25" W x 6.25" H x 2.5" D (without antenna)
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please