You are here: Home > Shop Brands > Linear > Building and Gated Community Access Control > Transmitters
We found 15 results matching your criteria.
Transmitters
Sort By:
Page of 2
Linear MDT-1AB  1-Channel Block Coded Visor Transmitter - ALSO LISTED AS #ACP00721 Linear ACT-21B 1-channel Block Coded Key Ring Transmitter -  ALSO LISTED AS  #ACP00615
Product Number: ACP00721

The Model MDT-1B 1-channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MDT-1B is a single-channel device. Pressing either the round button on the transmitter's front, or the small button on the transmitter's top will send the same signal. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip.

The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

Features

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Unique "Extra" top button
  • High visibility operate LED
  • Visor clip included
  • Two type 2032 lithium batteries supplied
  • MegaCode format
  • RF frequency: 318 MHz
  • 1.6" W x 4.2" H x 0.8" D
Product Number: ACP00615

The Model ACT-21B 1-channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-21B is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
Features

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 1616 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • Linear ACT-22B 3-channel Block Coded Key Ring Transmitter Linear ACT-31B 1-channel Block Coded Key Ring Transmitter - SOLD IN LOTS OF 10
    The Model ACT-22B 3-Channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-22B is a three-channel device. Pressing the transmitter's left or right front button sends channel one or two. Pressing both buttons sends channel three. Lithium batteries with a five-year service life are included and the transmitter is supplied with a quick-disconnect key ring. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
    Features

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 1616 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • Product Number: ACP00879

    The Model ACT-31B 1-Channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-31B is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Features

    • Compatible with all Linear access receivers and controllers
    • Supplied with quick-disconnect key ring
    • Factory programmed MegaCode format supports over 1,000,000 codes
    • Two type 2016 lithium batteries supplied
    • RF frequency: 318 MHz
    • 1.25" W x 2.25" H x 0.48" D
    Linear ACT-31C: 1-Channel Custom Block Coded Key Ring Transmitter Linear ACT-31D: 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag - ACP00954 - LN-ACT31D
    The Model ACT-31C/ACT-34C are two custom block coded key ring transmitters designed for use with Linear's access control products. Both devices are supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously. Custom block coded transmitters are factory programmed to your choice of sequential transmitter ID codes.

    1-Channel Custom Block Coded Key Ring Transmitter Model Number: ACT-31C

    Product Number: ACP00939

    The Model ACT-31C 1-Channel Custom Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-31C is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Custom block coded transmitters are factory programmed to your choice of sequential transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can also be selected to further customize the system.

    Features

  • Available in factory programmed blocks of transmitters with your choice of starting block code number
  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 2016 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • Minimum order quantity 10 transmitters
  • The Model ACT-31D 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag is designed for use with Linear's access control products. The Model ACT-31D is a single-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The ACT-31D also contains a 26-bit Wiegand proximity tag programmed to the same block code as the transmitter. The tag is compatible with the Model AM-PR Proximity Reader. Waving the transmitter near the reader will request access from the system.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Linear ACT-34B 4-channel Block Coded Key Ring Transmitter Linear ACT-34C: 4-Channel Custom Block Coded Key Ring Transmitter
    Product Number: ACP00872

    The Model ACT-34B 4-Channel Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-34B is a four-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Features

    • Compatible with all Linear access receivers and controllers
    • Supplied with quick-disconnect key ring
    • Factory programmed MegaCode format supports over 1,000,000 codes
    • Two type 2016 lithium batteries supplied
    • RF frequency: 318 MHz
    • 1.25" W x 2.25" H x 0.48" D
    4-Channel Custom Block Coded Key Ring Transmitter

    Model Number: ACT-34C

    Product Number: ACP00940

    The Model ACT-34C 4-Channel Custom Block Coded Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-34C is a four-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Custom block coded transmitters are factory programmed to your choice of sequential transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can also be selected to further customize the system.

    Features

  • Available in factory programmed blocks of transmitters with your choice of starting block code number
  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • Two type 2016 lithium batteries supplied
  • RF frequency: 318 MHz
  • 1.25" W x 2.25" H x 0.48" D
  • Minimum order quantity 10 transmitters
  • Linear ACT-34D: 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag - ACP00955 Linear GT-30 3-channel Genie Compatible Visor Transmitter
    The Model ACT-34D 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag is designed for use with Linear's access control products. The Model ACT-34D is a four-channel device supplied with a quick-disconnect key ring. Also included are lithium batteries with a five-year service life. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

    The ACT-34D also contains a 26-bit Wiegand proximity tag programmed to the same block code as the transmitter. The tag is compatible with the Model AM-PR Proximity Reader. Waving the transmitter near the reader will request access from the system.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Product Number: ACP00743

    The GT-30 is a three-button transmitter that sends a unique code for each button. Typically, one button is used to operate a community access gate, another button can activate the individual's garage door, and a third button can control an additional door or other device.

    Features

    • Three buttons and three channels to operate three independent gate, garage, and/or other access operations
    • Test/operate LED
    • Black case color
    • Molded design to comfortably fit the hand
    • Easy access to battery compartment
    • Anti-code-theft, rolling code technology
    • Visor clip supplied
    • Power: Two CR2016 lithium batteries
    • Frequency: 390 MHz
    • Codes: randomly selected from over 4 billion codes with each button press
    • Dimensions: 3.75 x 2.5 x .875 inches
    Linear GT-31 3-channel Genie Compatible Key Ring Transmitter - Sold in lots of 10 Linear MDT-2B 3-channel Block Coded Visor Transmitter
    Sold in lots of 10

    Product Number: ACP00870

    The GT-31 is a three-button miniature transmitter that sends a unique code for each button. Typically, one button is used to operate a community access gate, another button can activate the individual's garage door, and a third button can control an additional door or other device.

    Features
    • Three buttons and three channels to operate three independent gate, garage, and/or other access operations
    • Test/operate LED
    • Black case color
    • Molded-in hole to accept keychain or keyring
    • Anti-code-theft, rolling code technology
    • Quick-disconnect keyring supplied
    • Power: long-life 12 V battery
    • Frequency: 390 MHz
    • Codes: randomly selected from over 4 billion codes with each button press
    • Dimensions: 2.5 x 1.5 x .625 inches
    Product Number: ACP00720

    The Model MDT-2B 3-channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MDT-2B is a three-channel device. Pressing the transmitter's left or right front button sends channel one or two. Pressing the small button on the transmitter's top sends channel three. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip.

    The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

    Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.

    Features
    • Compatible with all Linear access receivers and controllers
    • Superior transmission range
    • Factory programmed MegaCode format supports over 1,000,000 codes
    • Unique "Extra" top button
    • High visibility operate LED
    • Visor clip included
    • Two type 2032 lithium batteries supplied
    • MegaCode format
    • RF frequency: 318 MHz
    • 1.6" W x 4.2" H x 0.8" D
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please