You are here: Home > Shop Brands > G.R.I. > Overhead Door Magnetic Switch Sets > 200 Series Surface Mount Switch Sets
We found 18 results matching your criteria.
Sort By:
Page of 2
G.R.I  200L36   Overhead Door Switch , Floor Mount, 3' Armored Cable, Closed Loop, 4175 "L" Bracket, w/ M-15 Closed Magnet G.R.I.  20036  Overhead Door Switch, Floor Mount, 3' Armored Cable, Closed Loop, w/ M-250 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY

The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • GI-20036HD Overhead Door / Floor Mount, 3' Armored Cable, Closed Loop, M-280 Magnet, Heavy Duty -  AVAILABLE IN MULTIPLES OF 10 ONLY GI-20036WG Overhead Door Switch, Floor Mount, 7-1/2" Switch, 3' Armored Cable, Closed Loop, Extended Gap, W/ M-280 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY

    The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • GI-20060HD Aluminum Overhead Door Switch, 7-1/2" Switch, Wide Gap, W/ 5' Lead -  AVAILABLE IN MULTIPLES OF 10 ONLY GI-220-36 Overhead Door Switch, Floor Mount, 3' Armored Cable, SPDT, W/ M-250 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY

    The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • GI-250-36 Overhead Door Switch, Wall Mount, 3' Armored Cable, Closed Loop, W/ M-250 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY GI-250-36EPAK Overhead Door Switch, Wall Mount, 3' Armored Cable, Closed Loop, W/ M-250 Magnet, W/470OHM, S/7000 OHMP -  AVAILABLE IN MULTIPLES OF 10 ONLY

    The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately

    GI-250-36EPAK

  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • GI-250-36WG Overhead Door Switch, Wall Mount, 7-1/2" Switch, 3' Armored Cable, Closed Loop, Extended Gap. W/ M-280 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY GI-270-72 Overhead Door Switch, Wall Mount, 3' Armored Cable, SPDT W/ M-250 Magnet, 72" Lead -  AVAILABLE IN MULTIPLES OF 10 ONLY

    The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • GI-8811 (20060HD) Aluminum Overhead Door Switch, 7-1/2" Switch, Wide Gap, W/ 5' Lead, W/ 33K Resistor -  AVAILABLE IN MULTIPLES OF 10 ONLY GI-8812 (25060HD) Overhead Door Switch, Wall Mount, 5' Armored Cable, Closed Loop, W/ M-250 Magnet, W/33K Resistor -  AVAILABLE IN MULTIPLES OF 10 ONLY

    The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please