You are here: Home > Shop Brands > Videolarm > Domes & Housings > Outdoor Housings
We found 46 results matching your criteria.
Sort By:
Page of 4
Videolarm ACB2 24V BLOWER & THERMOSTAT KIT FOR ACH13 Videolarm ACH2 - 24Vac heater/thermostat kit

ACB2 24V BLOWER & THERMOSTAT KIT FOR ACH13

ACH2 24Vac heater/thermostat kit

Videolarm ACH8HBWM ACH8WM with heater/blower Videolarm AD16CH2 - 16" Dust Proof Outdoor tubular hsg w/24Vac input, heater, for a

DESCRIPTION:

Outdoor Environmental hsg w/short aluminum body, clear window, featuring hinged, flip-top opening plus metal wall mount, and 24Vac heater/blower/thermostat

FEATURES:

• Side hinged for easy access when servicing
• Accepts many lens and camera combinations
• Designed to meet IP65 standards
• Includes 24 VAC heater/blower, sunshield and red flashing light kit
• WM800 light-duty steel bracket
• Also available as a VideoKit™ model with camera

AD16CH2 16 Dust Proof Outdoor tubular hsg w/24Vac input, heater, for a fixed camera

DESCRIPTION

The AP16 and AD16 aluminum outdoor housing offer outstanding protection for your camera. The AP16 is pressurized to seal out dust, moisture, insects, and pollution. In-the-field pressurization is easy with the Schraeder valve included on each unit. The AD16 is sealed to protect from dust particles that could damage camera equipment. Both include an integrated heater, and are available as VideoKit model.

FEATURES

Aluminum body, glass window
Integrated heater/defogger
Multi-pin, corrosion resistant connectors (AP16)
Three liquid tight fittings for wiring (AD16)
Optional sunshield
Optional metal mount
Both housings also available as VideoKit models with camera

The AD16 environmental, dust free housing shall be constructed from .16 (4mm) thick aluminum. The camera housing shall be designed to prevent dust from entering the unit. Chemically strengthened glass shall be used for the faceplate. Three liquid tight fittings (2 NPT 1/2 and 1 NPT 3/8) shall be included for cable entry. A camera cradle assembly shall be included to allow easy installation and access to the camera and internal equipment. Input power shall be 24 VAC. An integral heater/defogger shall be standard in each unit and shall be mounted to the camera cradle to allow heat transfer to the window to minimize fogging in high humidity and/or freezing under cold temperature conditions. The temperature range shall be -40˚ F to +120˚ F. An aluminum sunshield shall also be available as a separately boxed items.

Videolarm AD8CH2 8❠Dust Proof Outdoor tubular hsg w/24Vac input, heater, for a fixed camera Videolarm AP162CH - 16" Pressurized Outdoor tubular hsg w/24Vac input, heater, for a

Videolarm AD8CH2 8” Dust Proof Outdoor tubular hsg w/24Vac input, heater, for a fixed camera

Videolarm AP162CH - 16” Pressurized Outdoor tubular hsg w/24Vac input, heater, for a fixed camera

DESCRIPTION:

The AP16 aluminum outdoor housing offers an outstanding protection for your camera. The AP16 is pressurized to seal out dust, moisture, insects, and pollution. In-the-field pressurization is easy with the Schraeder valve included on each unit. Includes an integrated heater, and is available as VideoKit™model.

FEATURES:

  • 16” Pressurized Outdoor tubular hsg w/115Vac input
  • heater
  • for a fixed camera
  • Videolarm AP21CH2- AP21CH with 24 VAC heater (2.35 Amps) Videolarm BMT10C/SS - Stainless Steel version of BMT10C (special order, please contact factory)

    DESCRIPTION:

    DESCRIPTIONThe AP21CH pressurized housing is designed to provide maximum protection for CCD cameras and lenses. Both the front and rear end caps are sealed with O-rings, keeping equipment safe from moisture, dust and insects. Power and video enter through MS style pressure connectors in the rear end cap. The front window is made of tempered glass.

    FEATURES:

  • 21” Pressurized Outdoor tubular hsg w/24Vac input
  • heater
  • for a fixed camera
  • Videolarm BMT10C/SS - Stainless Steel version of BMT10C (special order, please contact factory)

    Videolarm BMT10C2 - BMT10 with 24 VAC 28 vA heater Videolarm BMT10C3 - BMT10 with 230 VAC 28 vA heater

    DESCRIPTION:

    The BMT10 is a bullet resistant environmental camera housing. It features a 7-gauge steel body, and is designed and constructed to meet or exceed a Level II protection per UL standard 752. The enclosure has an integrated tilt bracket that protects all wiring and allows for surface mount applications. Camera/lens combinations up to 9.5” long and 3.25” wide can be accommodated by the BMT10, plus an innovative camera sled allows the camera to be rotated 360° within the housing to allow for any mount position.

    FEATURES:

  • Steel Bullet-Resistant Outdoor hsg w/Window Guard™ paint shield
  • plus 24Vac heater/thermostat
  • DESCRIPTION:

    The BMT10 is a bullet resistant environmental camera housing. It features a 7-gauge steel body, and is designed and constructed to meet or exceed a Level II protection per UL standard 752. The enclosure has an integrated tilt bracket that protects all wiring and allows for surface mount applications. Camera/lens combinations up to 9.5” long and 3.25” wide can be accommodated by the BMT10, plus an innovative camera sled allows the camera to be rotated 360° within the housing to allow for any mount position.

    FEATURES:

  • Steel Bullet-Resistant Outdoor hsg w/Window Guard™ paint shield
  • plus 220/240Vac heater/thermostat
  • Videolarm DDW10CR2 - DDW10CR with 24Vac heater Videolarm FDP7C2 - 7❠Outdoor dome hsg w/pendant mount, clear dome, 24Vac input, heater/blower, plus universal bracket for unitized camera systems

    DESCRIPTION:

    The bullet resistant DeputyDome™ is available in either a standard or pressurized model. The day/night color camera features an integral zoom lens. An integral pan/tilt with 360˚ continuous rotation is also included. Each DeputyDome™ comes with a quick-connect wall mount.

    FEATURES:

    Standard Models
    • Meets or exceeds Level 1 protection per UL Standard 752
    • Day/Night Sony EXView HAD™ color camera w/ integral 26x optical zoom lens
    • 360° continuous rotation pan/tilt (1-40˚ panning speed, 1-30˚ tilt speed)
    • 63 presets • Input voltage 24/120 VAC 50/60 Hz
    • An on-board transformer for the 120 VAC model to provide 24 VAC power to the blower and camera. The heaters will be 120 VAC
    • Stainless steel housing and mounting bracket
    • Rotating “turret” transfers ballistic impact to outer steel housing
    • Heater, blower and surge protection standard equipment
    • Quick disconnect from wall mount for installation and servicing
    • Tamper-resistant fasteners

    DDW10CR:

  • 10.5” diameter outdoor ballistic-rated dome housing with clear lower dome.
  • Color camera with auto focus 18X zoom lens
  • 0.2 lux in B/W mode
  • 360° integral, pre-wired, variable speed pan/tilt (1-40° per second panning speed)
  • 120 VAC heater and surge protector
  • factory installed transformer for blower and camera.
  • Factory installed receiver compatible with VLC485 and other RS485/422 protocols.
  • PRODUCT DESCRIPTION

    The indoor and outdoor 7” FusionDome™ models offers versatility and camera protection in a compact size. It accepts analog camera systems from Canon & Elmo and many network cameras from Axis, Canon, Elmo, JVC, Panasonic and Sony or a single fixed camera with a maximum camera length of 7.5”. On outdoor models a heater and blower are standard, and a cold weather kit is available to offer even wider temperature ranges.

       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please