You are here: Home > Catalog > Sensors > Sounders/Strobes > New Category
We found 9 results matching your criteria.
Sort By:
Page of 1
Fire-Lite 411 Slave DACT Digital Alarm Communicator Transmitter Fire-Lite 411UD Slave Up/Downloadble DACT Digital Alarm Communicator Transmitter
The Fire-Watch 411 Series from Fire•Lite are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, and non-fire applications. The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance. Due to extremely flexible programming options, the 411 Series slave DACTs are also ideal for monitoring non-fire control panels. With fifteen selectable transmission formats, including ADEMCO Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand-held programmer (PRO-411), or remotely (411UD only) utilizing an optional PK-411UD Windows®-based remote upload/download software package. The PK-411UD upload/download software also permits system integration and revision from a remote site. The Fire-Watch 411 Series from Fire•Lite are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, and non-fire applications. The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance. Due to extremely flexible programming options, the 411 Series slave DACTs are also ideal for monitoring non-fire control panels. With fifteen selectable transmission formats, including ADEMCO Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand-held programmer (PRO-411), or remotely (411UD only) utilizing an optional PK-411UD Windows®-based remote upload/download software package. The PK-411UD upload/download software also permits system integration and revision from a remote site.
Fire-Lite 411UDAC Stand-Alone / Slave DACT Fire-Lite IPBRKT Bracket for IPDACT
411UDAC Four-channel, dual-line, stand-alone or slave Fire Alarm Communicator. Includes housing, operating and programming instructions. Use PRO-411 hand-held DACT programmer for local programming; or PK-411UD Windows-based programming software for remote programming and real-time diagnostics. DP-2 Dead-front dress panel, required for Canadian applications.

The Fire-Watch 411UDAC from Fire•Lite is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept waterflow devices, two- and four-wire smoke detectors, pull stations, and other normally-open contact devices. The 41UDAC is a cost-effective solution for applications that require an existing (or new) fire alarm control or non-fire control panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.

Due to its extremely flexible programming options, the 411UDAC is also ideal for use as a stand-alone unit to monitor: sprinkler systems for waterflow and supervisory conditions; processes (i.e., water level, gas detection, loss of air flow); and normally-open contact devices.

With fifteen selectable transmission formats, including Ademco Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand-held programmer (PRO-411), or remotely utilizing an optional PK-411UD Windows®-based remote upload/download software package. The PK-411UD upload/download software also permits system interrogation and revision from a remote site.

IPBRKT: Mounting bracket kit consisting of screws, ground wire/lug and battery shield with standoffs required for mounting in lower enclosure section of MS-9050UD, MS-9200UDLS, MS-5UD and MS-10UD.
Fire-Lite IPENC External mounting enclosure for IPDACT Fire-Lite PRO-411 Hand-held Programmer
IPENC: External mounting enclosure consisting of mounting bracket IPBRKT, ground wire/lug and screws. Enclosure must be “close-nipple” to a panel no further than 6 in. (15 cm) via conduit. Use PRO-411 hand-held DACT programmer for local programming the Fire-Lite 411s
  • Programming can be accomplished on-site with a hand-held programmer (PRO-411)
  • Fire-Lite UDACT-F Universal DACT Fire-Lite VisorALARM-Plus: Receiver with LCD display and keypad
    The Fire•Lite UDACT-F Universal Digital Alarm Communicator Transmitter may be used on the MS-9200, MS-9600 and Sensiscan 2000 Fire Alarm Control Panels (FACPs). The UDACT-F transmits system status to UL listed Central Station Receivers via the public switched telephone network. The UDACT-F is compact in size and may be mounted inside the host control panel or may mount externally in a separate cabinet. EIA-485 annunciator communications bus and regulated 24-volt connections are required. The UDACT-F transmits 198 points or 56 zones when connected to the MS-9200, up to 636 points or 98 zones when connected to the MS-9600, and 56 zones when connected to the Sensiscan 2000. VisorALARM PLUS 2U IP Alarm Receiver for MIP and IPDACT modules

    The VisorALARM PLUS IP 2U receiver is Teldat’s solution to manage and receive alarms from burglar and/or fire alarm panels equipped with Teldat’s MIP or FireLite’s IPDACT IP alarm transmission modules. Each VisorALARM PLUS 2U receiver supports up to 3,000 alarm panels and provides the industry’s most advanced set of features including line supervision, 512 bit encryption and a three level redundancy system for the highest possible availability and reliability levels. Integration with central station automation software packages is almost immediate as the VisorALARM PLUS 2U receiver is able to emulate the industry’s most common receiver protocols. Communication between the VisorALARM PLUS 2U receiver and the automation server computer is done via a regular serial connection.

    Features

    • Scalability: Simultaneous management for up to 3,000 mIP and/or IPDACT remote devices.

    • Line monitoring: Monitors connectivity status with all registered devices, generating technical alarms for communication loss and restored events.

    • Network access monitoring: Monitors the status of its network access to avoid generating false technical alarms under a communications failure situation.

    • Support for dynamic and static IP addresses on the remote MIP and IPDACT devices. Encryption: Uses 512 bit AES encryption algorithm for all communications with installed IP modules.

    • Communicates alarms to the automation server via a serial connection, using ContactID format and emulating Surgard, Radionics or Ademco receiver protocols.

    • Smart card: Saves all configuration information on an external smart card that can be used for immediate system replacement under crash recovery situations.

    • Secondary receiver support: Two VisorALARMs PLUS 2U can be setup in a primary/secondary configuration for high availability and redundancy options. MIP and IPDACT units in the field will report to the primary unit and will automatically switch to the secondary receiver if the primary becomes unavailable.

    • Secondary receiver automatic synchronization: The primary and secondary VisorALARM PLUS 2U receivers support the TRCP protocol that allows them both to maintain identical configuration files.

    • Back up receiver automatic takeover: An additional backup VisorALARM PLUS 2U receiver can be placed in the same network as the primary receiver, programming the unit to takeover the identity of the primary receiver under the event that it becomes unavailable.

    • Local and remote management tools: Local management is available through a console-type serial connection. Remote management is implemented via a telnet session.

    • Real time embedded operating system: for maximum performance and protection against viruses and hacker attacks.

    • Display and keyboard: Management, monitoring and alarm validation directly from your receiver front keys and display.

    Fire-Lite BG12TR pull station trim ring
    The BG12TR is intended for indoor use and is designed to be snapped onto the back of a BG12 Series Manual Fire Alarm Pull Station (prior to wiring device).

    The trim ring provides an additional 1/2” (12.7mm) of clearance on all sides as well as accommodating electrical boxes protruding from the wall surface up to 1/8” (3.175mm).

    This trim ring allows installers to retrofit applications where a larger pull station was previously installed.

  • Dimensions: 6 1/2" (165mm) X 5 1/8" (130mm) X 1/4" (6.35mm)
  • Color: Red
  • Material: Polycarbonate
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please