You are here: Home > Catalog > Sensors > Sounders/Strobes > New Category
We found 17 results matching your criteria.
Sort By:
Page of 2
Fire Lite 17003 Key lock. Fire Lite 17007 Hex lock

Fire Lite 17003 Key lock.


Our Price : $7.06

Fire Lite 17007 Hex lock


Our Price : $3.97

17003 Key for Control Panel Lock & Pull Station BG8 17007 SPARE WRENCH 9/64" (BG10)
Fire Lite WP-10 Outdoor use backbox. FireLite SB-10 Indoor use backbox.
WP-10 Outdoor use backbox. SB-10 Indoor use backbox.
Fire Lite by Honeywell ACC-25/50ZST Audio Command Center Fire-Lite BG-12LX Addressable Dual-Action Pull Station
Fire-Lite BG-12LX Addressable Dual-Action Pull Station
List Price: $89.95

Our Price : $67.26

You save $22.69!
The ACC•25/50ZST is similar to the ACC-25/50ZS but with the ability to have 24 telephone circuits. An optional 25 watt, 25 VRMS audio amplifier is available for system expansion to 50 watts or as a secondary amplifier in jurisdictions requiring such backup. A 70.7 VRMS converter is also available for independently converting amplifiers to meet retrofit needs.

The AUDIO•COMMAND•CENTER•25/50 Zone System with FireFighters Telephone (ACC-25/50ZST) is a state-of-the-art Emergency Voice Evacuation panel (EVAC panel) capable of splitting 25 or 50 watts of audio power and up to eight speaker circuits (i.e., zones). The ACC-25/50ZST includes an ACCFFT Fire Fighter Telephone Module with keypad which provides indications of phone activation, remote page activation, remote microphone activation and corresponding trouble conditions.

Additionally, up to 24 telephone circuits can be annunciated at the ACC-FFT by connecting addressable monitor modules to the optional FPJ-F or RPJ-F Remote Phone Jacks. The ACC-25/50ZST provides the ability to record five field-programmable messages (up to 60 seconds total message duration) with an integral commercial-grade emergency communications microphone or from an external audio source. Significant technological enhancements set the ACC-25/ 50ZST apart from other EVAC panels; these include full supervision in both active alarm and standby conditions, supervision of amplifier outputs, field wiring, message generator, all tone generators, and the microphone. The integral power supply is capable of charging up to 18 AH batteries, which can be housed in the ACC-25/50ZST cabinet.

The ACC-25/50ZST is suitable for use as an adjunct (slave or stand-alone) to most UL-Listed Fire Alarm Control Panels (FACPs). An optional 25 watt, 25 VRMS audio amplifier is available for system expansion to 50 watts or as a secondary amplifier in jurisdictions requiring such backup. A 70.7 VRMS converter is also available for independently converting amplifiers to meet retrofit needs.

The Zone Splitter Module (ACC-ZSM) divides the output of the Audio Amplifier Module(s) (ACC-AAM25) into up to eight speaker circuits (i.e., zones). The Zone Page Module with Keypad (ACC-ZPMK) provides full manual control of the speaker circuits, status indication of each of the speaker circuits, and automatic control by the FACP via the ACS serial link connection on the MS-9200UDLS, MS-9600LS and MS- 9600UDLS Addressable Panels.

A host of field-programming options, including the capability of five custom messages (fire, tornado, evacuation, hazmat, nonfire, multi-language, etc.) make the ACC-25/50ZST the most versatile voice evacuation system available.

The Fire-Lite BG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface (mounted inside) for Fire-Lites addressable MS-9200 and MS-9600 fire alarm control panels. Because the BG-12LX is addressable, the control panel can display the exact location of the activated manual pull station. This leads fire service personnel quickly to the location of the alarm.

Aesthetically pleasing, highly visible, dual-action design.
Meets ADA 5 lb. maximum pull force.
Easily operated (dual-action).
Attractive shape and textured finish.
Mounts, semi-flush, to a standard single-gang (2.125" [5.3975 cm] minimum depth), double-gang, or 4" (10.16 cm) square electrical box.
When the handle latches in down position, the word ACTIVATED appears at the top of the handle in bright yellow to clearly indicate the station has been operated.
Key/lock reset; needs only a 1/4-turn to lock/unlock.
Includes Braille text on station handle.
Captive screw terminals wire-ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm wire).
Optional trim ring (BG-TR).
Meets UL 38, Standard for Manually Actuated Signaling Boxes.
Maintenance personnel can open station (for inspection and testing) without causing an alarm condition.
Built-in bicolor LED, which is visible through the handle of the station, flashes red in normal operation and latches on steady red when in alarm.

Fire-Lite BG-8 Manual Pull Station Fire-Lite BG-8SP Spanish Manual Pull Station with FUEGO & JALE
The BG-8 Manual Pull Station is a metal pull station that provides a single-action, normally-open contact alarm initiating point for use with UL listed Fire Alarm Control Panels. The BG-8 Manual Pull Station is a metal pull station that provides a single-action, normally-open contact alarm initiating point for use with UL listed Fire Alarm Control Panels.
FireLite BG-12 Dual-Action Pull Station FireLite BG-12L Dual-Action Pull Station with key lock
BG-12 Dual-action pull station with SPST N/O switch, screw terminal connections, hex lock.

The Fire Lite Alarms BG-12 Series is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. It was designed to meet multiple applications with the installer and end-user in mind. The BG-12 Series features a variety of models including single- and dual action versions.

The BG-12 Series provides Fire Lite Fire Alarm Control Panels (FACPs), as well as other manufacturers controls, with a manual alarm initiating input signal. Its innovative design, durable construction, and multiple mounting options make the BG-12 Series simple to install, maintain, and operate.

Aesthetically pleasing, highly visible design/color.
Attractive contoured shape with light textured finish.
Meets ADA 5 lb. maximum pull-force.
Meets UL 38, Standard for Manually Actuated Signaling Boxes.
Easily operated (single- or dual-action), yet designed to prevent false alarms when bumped, shaken, or jarred.
PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated.
The word ACTIVATED appears on the top of the handle in bright yellow, further indicating operation of the station.
Operation handle features white arrows showing basic operation direction, for non-English-speaking persons.
Braille text included in finger-hold area of operation handle and across top of handle.
Multiple hex- and key-lock models available.
U.S. patent-pending hex-lock needs only a quarter-turn to lock/unlock.
Station can be opened for inspection and maintenance without initiating an alarm.
Product ID label viewable by simply opening the cover; label is made of a durable long-life material.
The words NORMAL and ACTIVATED are molded into the plastic adjacent to the alarm switch (located inside).
Four-position terminal strip molded into backplate.
Terminal strip includes Phillips combination-head captive 8/32 screws for easy connection to Initiating Device Circuit (IDC).
Terminal screws backed-out at factory and shipped ready to accept field wiring (up to 12 AWG/3.25 mm).
Terminal numbers are molded into the backplate, eliminating the need for labels.
Switch contacts are normally open.
Can be surface (with SB-I/0 or SB-10) or semi-flush mounted. Semi-flush mount to a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box.
Backplate is large enough to overlap a single-gang backbox cutout by up to 1/2" (12.7 mm).
Optional trim ring (BG-TR).
Spanish version (FUEGO) available (BG-12LSP).
Designed to replace the Fire-Lite Legacy BG-10 Series.
Models packaged in attractive, clear plastic (PVC), clamshell-style, Point-of-Purchase packages. Packaging includes a cutaway dust/paint cover in shape of pull station.

BG-12S Single-action pull station with pigtail connections, hex lock.
BG-12SL Same as BG-12S with key lock.
BG-12 Dual-action pull station with SPST N/O switch, screw terminal connections, hex lock.
BG-12L Same as BG-12 with key lock.
BG-12LSP Same as BG-12L with English / Spanish (FIRE / FUEGO) labeling.
BG-12LOB Same as BG-12L with outdoor use listing. Includes outdoor listed backbox, and sealing gasket.
BG-12LO Same as BG-12L with outdoor use listing. Does not include backbox.
BG-12LA Same as BG-12L with auxiliary contacts.
BG-12LPS Same as BG-12L with presignal feature.
BG-12LPSP Same as BG-12LPS with English / Spanish (FIRE / FUEGO) labeling.
SB-I/0 Indoor/outdoor backbox.
SB-10 Indoor use backbox.
WP-10 Outdoor use backbox.
WBB Outdoor use backbox.
17003 Key lock.
17007 Hex lock.

BG-12L Same as BG-12 with key lock.<

The Fire Lite Alarms BG-12 Series is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. It was designed to meet multiple applications with the installer and end-user in mind. The BG-12 Series features a variety of models including single- and dual action versions.

The BG-12 Series provides Fire Lite Fire Alarm Control Panels (FACPs), as well as other manufacturers controls, with a manual alarm initiating input signal. Its innovative design, durable construction, and multiple mounting options make the BG-12 Series simple to install, maintain, and operate.

Aesthetically pleasing, highly visible design/color.
Attractive contoured shape with light textured finish.
Meets ADA 5 lb. maximum pull-force.
Meets UL 38, Standard for Manually Actuated Signaling Boxes.
Easily operated (single- or dual-action), yet designed to prevent false alarms when bumped, shaken, or jarred.
PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated.
The word ACTIVATED appears on the top of the handle in bright yellow, further indicating operation of the station.
Operation handle features white arrows showing basic operation direction, for non-English-speaking persons.
Braille text included in finger-hold area of operation handle and across top of handle.
Multiple hex- and key-lock models available.
U.S. patent-pending hex-lock needs only a quarter-turn to lock/unlock.
Station can be opened for inspection and maintenance without initiating an alarm.
Product ID label viewable by simply opening the cover; label is made of a durable long-life material.
The words NORMAL and ACTIVATED are molded into the plastic adjacent to the alarm switch (located inside).
Four-position terminal strip molded into backplate.
Terminal strip includes Phillips combination-head captive 8/32 screws for easy connection to Initiating Device Circuit (IDC).
Terminal screws backed-out at factory and shipped ready to accept field wiring (up to 12 AWG/3.25 mm).
Terminal numbers are molded into the backplate, eliminating the need for labels.
Switch contacts are normally open.
Can be surface (with SB-I/0 or SB-10) or semi-flush mounted. Semi-flush mount to a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box.
Backplate is large enough to overlap a single-gang backbox cutout by up to 1/2" (12.7 mm).
Optional trim ring (BG-TR).
Spanish version (FUEGO) available (BG-12LSP).
Designed to replace the Fire-Lite Legacy BG-10 Series.
Models packaged in attractive, clear plastic (PVC), clamshell-style, Point-of-Purchase packages. Packaging includes a cutaway dust/paint cover in shape of pull station.

BG-12S Single-action pull station with pigtail connections, hex lock.
BG-12SL Same as BG-12S with key lock.
BG-12 Dual-action pull station with SPST N/O switch, screw terminal connections, hex lock.
BG-12L Same as BG-12 with key lock.
BG-12LSP Same as BG-12L with English / Spanish (FIRE / FUEGO) labeling.
BG-12LOB Same as BG-12L with outdoor use listing. Includes outdoor listed backbox, and sealing gasket.
BG-12LO Same as BG-12L with outdoor use listing. Does not include backbox.
BG-12LA Same as BG-12L with auxiliary contacts.
BG-12LPS Same as BG-12L with presignal feature.
BG-12LPSP Same as BG-12LPS with English / Spanish (FIRE / FUEGO) labeling.
SB-I/0 Indoor/outdoor backbox.
SB-10 Indoor use backbox.
WP-10 Outdoor use backbox.
WBB Outdoor use backbox.
17003 Key lock.
17007 Hex lock.

FireLite BG-12LA Dual-Action Pull Station with auxiliary contacts FireLite BG-12LO Dual-Action Pull Station with outdoor use listing
BG-12LA Same as BG-12L with auxiliary contacts.

The Fire Lite Alarms BG-12 Series is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. It was designed to meet multiple applications with the installer and end-user in mind. The BG-12 Series features a variety of models including single- and dual action versions.

The BG-12 Series provides Fire Lite Fire Alarm Control Panels (FACPs), as well as other manufacturers controls, with a manual alarm initiating input signal. Its innovative design, durable construction, and multiple mounting options make the BG-12 Series simple to install, maintain, and operate.

Aesthetically pleasing, highly visible design/color.
Attractive contoured shape with light textured finish.
Meets ADA 5 lb. maximum pull-force.
Meets UL 38, Standard for Manually Actuated Signaling Boxes.
Easily operated (single- or dual-action), yet designed to prevent false alarms when bumped, shaken, or jarred.
PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated.
The word ACTIVATED appears on the top of the handle in bright yellow, further indicating operation of the station.
Operation handle features white arrows showing basic operation direction, for non-English-speaking persons.
Braille text included in finger-hold area of operation handle and across top of handle.
Multiple hex- and key-lock models available.
U.S. patent-pending hex-lock needs only a quarter-turn to lock/unlock.
Station can be opened for inspection and maintenance without initiating an alarm.
Product ID label viewable by simply opening the cover; label is made of a durable long-life material.
The words NORMAL and ACTIVATED are molded into the plastic adjacent to the alarm switch (located inside).
Four-position terminal strip molded into backplate.
Terminal strip includes Phillips combination-head captive 8/32 screws for easy connection to Initiating Device Circuit (IDC).
Terminal screws backed-out at factory and shipped ready to accept field wiring (up to 12 AWG/3.25 mm).
Terminal numbers are molded into the backplate, eliminating the need for labels.
Switch contacts are normally open.
Can be surface (with SB-I/0 or SB-10) or semi-flush mounted. Semi-flush mount to a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box.
Backplate is large enough to overlap a single-gang backbox cutout by up to 1/2" (12.7 mm).
Optional trim ring (BG-TR).
Spanish version (FUEGO) available (BG-12LSP).
Designed to replace the Fire-Lite Legacy BG-10 Series.
Models packaged in attractive, clear plastic (PVC), clamshell-style, Point-of-Purchase packages. Packaging includes a cutaway dust/paint cover in shape of pull station.

BG-12S Single-action pull station with pigtail connections, hex lock.
BG-12SL Same as BG-12S with key lock.
BG-12 Dual-action pull station with SPST N/O switch, screw terminal connections, hex lock.
BG-12L Same as BG-12 with key lock.
BG-12LSP Same as BG-12L with English / Spanish (FIRE / FUEGO) labeling.
BG-12LOB Same as BG-12L with outdoor use listing. Includes outdoor listed backbox, and sealing gasket.
BG-12LO Same as BG-12L with outdoor use listing. Does not include backbox.
BG-12LA Same as BG-12L with auxiliary contacts.
BG-12LPS Same as BG-12L with presignal feature.
BG-12LPSP Same as BG-12LPS with English / Spanish (FIRE / FUEGO) labeling.
SB-I/0 Indoor/outdoor backbox.
SB-10 Indoor use backbox.
WP-10 Outdoor use backbox.
WBB Outdoor use backbox.
17003 Key lock.
17007 Hex lock.

BG-12LO Same as BG-12L with outdoor use listing. Does not include backbox.

The Fire Lite Alarms BG-12 Series is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. It was designed to meet multiple applications with the installer and end-user in mind. The BG-12 Series features a variety of models including single- and dual action versions.

The BG-12 Series provides Fire Lite Fire Alarm Control Panels (FACPs), as well as other manufacturers controls, with a manual alarm initiating input signal. Its innovative design, durable construction, and multiple mounting options make the BG-12 Series simple to install, maintain, and operate.

Aesthetically pleasing, highly visible design/color.
Attractive contoured shape with light textured finish.
Meets ADA 5 lb. maximum pull-force.
Meets UL 38, Standard for Manually Actuated Signaling Boxes.
Easily operated (single- or dual-action), yet designed to prevent false alarms when bumped, shaken, or jarred.
PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated.
The word ACTIVATED appears on the top of the handle in bright yellow, further indicating operation of the station.
Operation handle features white arrows showing basic operation direction, for non-English-speaking persons.
Braille text included in finger-hold area of operation handle and across top of handle.
Multiple hex- and key-lock models available.
U.S. patent-pending hex-lock needs only a quarter-turn to lock/unlock.
Station can be opened for inspection and maintenance without initiating an alarm.
Product ID label viewable by simply opening the cover; label is made of a durable long-life material.
The words NORMAL and ACTIVATED are molded into the plastic adjacent to the alarm switch (located inside).
Four-position terminal strip molded into backplate.
Terminal strip includes Phillips combination-head captive 8/32 screws for easy connection to Initiating Device Circuit (IDC).
Terminal screws backed-out at factory and shipped ready to accept field wiring (up to 12 AWG/3.25 mm).
Terminal numbers are molded into the backplate, eliminating the need for labels.
Switch contacts are normally open.
Can be surface (with SB-I/0 or SB-10) or semi-flush mounted. Semi-flush mount to a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box.
Backplate is large enough to overlap a single-gang backbox cutout by up to 1/2" (12.7 mm).
Optional trim ring (BG-TR).
Spanish version (FUEGO) available (BG-12LSP).
Designed to replace the Fire-Lite Legacy BG-10 Series.
Models packaged in attractive, clear plastic (PVC), clamshell-style, Point-of-Purchase packages. Packaging includes a cutaway dust/paint cover in shape of pull station.

BG-12S Single-action pull station with pigtail connections, hex lock.
BG-12SL Same as BG-12S with key lock.
BG-12 Dual-action pull station with SPST N/O switch, screw terminal connections, hex lock.
BG-12L Same as BG-12 with key lock.
BG-12LSP Same as BG-12L with English / Spanish (FIRE / FUEGO) labeling.
BG-12LOB Same as BG-12L with outdoor use listing. Includes outdoor listed backbox, and sealing gasket.
BG-12LO Same as BG-12L with outdoor use listing. Does not include backbox.
BG-12LA Same as BG-12L with auxiliary contacts.
BG-12LPS Same as BG-12L with presignal feature.
BG-12LPSP Same as BG-12LPS with English / Spanish (FIRE / FUEGO) labeling.
SB-I/0 Indoor/outdoor backbox.
SB-10 Indoor use backbox.
WP-10 Outdoor use backbox.
WBB Outdoor use backbox.
17003 Key lock.
17007 Hex lock.

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please