You are here: Home > Shop Brands > ID-View > Cameras > PTZ Cameras > PTZ Accessories
We found 7 results matching your criteria.
PTZ Accessories
Sort By:
Page of 1
ID-View IV-7312-S CCTV Control Keyboard - 2 Axis Joystick and DVR Or PTZ Camera Remote Control Keyboard, Manual Pan/Tilt - 16 Cam/1 Mux - 12v DC/5W ID-View IV-7313-H CCTV Control Keyboard - 3 Axis Joystick and Advanced DVR Or PTZ Camera Remote Control Keyboard, Manual Pan/Tilt - 255 Dec/16 Mux's - 12v DC or 24V AC
The IV-731X family of control keyboards harnesses the latest hardware and firmware technology to give you the best solution for surveillance control. Multiple cameras, Multiplexers and DVRs can be effortlessly setup and controlled via the IV-731X. Through the built-in RS232 port, the latest control firmware can be upgraded easily, assuring you the flexibility of customization unmatched by others.

IV-7312-S is a basic control keyboard used for smaller CCTV system, up to 16 high speed dome cameras are mapped directly to the 16 hot keys on the front panel. IV-7313-H is useful in a large CCTV system, up to 223 Dome cameras and 16 Multiplexers/ DVRs can be controlled by 16 keyboards.

Dependability and ultra-high reliability are key factors in the IV-731X design cycle. Every IV-731X is assembled with meticulous care and thorough testing at our ISO9001 compliant factory. High performance, reliability, and reasonable pricing, IV-731X is an ideal solution for your tough surveillance requirements.

Features:

  • RS-485 port for CCTV system control
  • Built-in DSCP, Pelco D&P protocol
  • Joystick control of PTZ functions
  • Preset position and Cruise control
  • User-friendly interface
  • Firmware upgrade via RS-232
  • Control Dome cameras, P/T/Z Receivers, Multiplexers, DVRs
  • Maximum 255 devices can be controlled on the same bus, included 223 Dome Cameras or Receivers, 16 System Keyboards, 16 Multiplexers (or DVRs) (only on D7313)
  • Built-in Real Time Clock (only on D7313)
  • Support System Clock Calibration (only on D7313)
  • Optional 2-axis joystick

    Specifications:

  • Power: 12 Volt DC
  • Power Consumption: 5W
  • RS-485 port: RJ-11, Terminal Blockx1
  • RS-232 port: D-SUB 9pin x 1
  • Device on Bus: IV-7312-S: 16 Cameras, 1 Multiplexer, IV-7313-H: 255 Devices maximum, 16 Multiplexers
  • Pan/Tilt Control: Manual Pan/Tilt
  • Preset: 128 maximum
  • Auto Pan: On/Off
  • Sequence: 4 Minimum
  • Cruise: On/Off
  • Lens Control
  • Zoom: Tele/Wide
  • Focus: Near/Far, Auto
  • Iris: Open/Close, Auto
  • Camera Setup: Yes
  • Multiplexer Control: Channel select: 16
  • Multiplexer Setup: Yes
  • Dimensions (L x W x H): 330 x 175 x 65 mm (139 x 6.9 x 2.6 inches)
  • Operation Temperature: 0~40 (32 to 104)
  • Operation Humidity: Below 90%, non-condensing
  • Weight: 1.5kg (3.3 lbs)
  • The IV-731X family of control keyboards harnesses the latest hardware and firmware technology to give you the best solution for surveillance control. Multiple cameras, Multiplexers and DVRs can be effortlessly setup and controlled via the IV-731X. Through the built-in RS232 port, the latest control firmware can be upgraded easily, assuring you the flexibility of customization unmatched by others.

    IV-7312-S is a basic control keyboard used for smaller CCTV system, up to 16 high speed dome cameras are mapped directly to the 16 hot keys on the front panel. IV-7313-H is useful in a large CCTV system, up to 223 Dome cameras and 16 Multiplexers/ DVRs can be controlled by 16 keyboards.

    Dependability and ultra-high reliability are key factors in the IV-731X design cycle. Every IV-731X is assembled with meticulous care and thorough testing at our ISO9001 compliant factory. High performance, reliability, and reasonable pricing, IV-731X is an ideal solution for your tough surveillance requirements.

    Features:

  • RS-485 port for CCTV system controlnn
  • Built-in DSCP, Pelco D&P protocol
  • Joystick control of PTZ functions
  • Preset position and Cruise control
  • User-friendly interface
  • Firmware upgrade via RS-232
  • Control Dome cameras, P/T/Z Receivers, Multiplexers, DVRs
  • Maximum 255 devices can be controlled on the same bus, included 223 Dome Cameras or Receivers, 16 System Keyboards, 16 Multiplexers (or DVRs) (only on D7313)
  • Built-in Real Time Clock (only on D7313)
  • Support System Clock Calibration (only on D7313)
  • Optional 2-axis joystick

    Specifications:

  • Power: 12 Volt DC
  • Power Consumption: 5W
  • RS-485 port: RJ-11, Terminal Blockx1
  • RS-232 port: D-SUB 9pin x 1
  • Device on Bus: IV-7312-S: 16 Cameras, 1 Multiplexer, IV-7313-H: 255 Devices maximum, 16 Multiplexers
  • Pan/Tilt Control: Manual Pan/Tilt
  • Preset: 128 maximum
  • Auto Pan: On/Off
  • Sequence: 4 Minimum
  • Cruise: On/Off
  • Lens Control
  • Zoom: Tele/Wide
  • Focus: Near/Far, Auto
  • Iris: Open/Close, Auto
  • Camera Setup: Yes
  • Multiplexer Control: Channel select: 16
  • Multiplexer Setup: Yes
  • Dimensions (L x W x H): 330 x 175 x 65 mm (139 x 6.9 x 2.6 inches)
  • Operation Temperature: 0X~40X (32X to 104X)
  • Operation Humidity: Below 90%, non-condensing
  • Weight: 1.5kg (3.3 lbs)
  • ID-View IV-D77H03-1W Straight tube, 25cm (~10:), ceiling mount, white (for DU-DH800 series) ID-View IV-D77H03-2W  Corner Plate, Corner mount, white (for DU-DH800 series)
    Straight tube, 25cm (~10:), ceiling mount, white (for DU-DH800 series) Corner Plate, Corner mount, white (for DU-DH800 series)
    ID-View IV-D77H05-WCST Corner standard mount, white ID-View IV-D77H05-WPTD Pole direct mounting, thin
    ID-View IV-D77H05-WCST Corner standard mount, white ID-View IV-D77H05-WPTD Pole direct mounting, thin
    ID-View IV-D77R1 Repeater, RS422-RS485
    IV-D77R1 Repeater, RS422-RS485
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please