2 Position Homing and Sequencing Video Switcher

The 2PSWT is a basic two position homing and sequencing video switcher. The front panel controls consist of a 3 position toggle switch for homing to either camera 1 or 2 or setting the dwell time via a recessed pot in the front panel. The dwell time can be set from approximately .2 seconds to 1 minute. The 2PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.

This North American style, multipurpose push button switch and clear Mini Stopper II cover protect a wide range of applications indoors. The button incorporates a unique, patented design and the clear cover helps prevent accidental activation.

The highly advanced Stopper Station push button unit is ADA compliant. The button incorporates a unique, patented design that helps dramatically to stop accidental activation. Molded unit has key to reset button.

The Mini Stopper II offers excellent protection against physical damage (both accidental or intentional). Consists of a clear, tamperproof, super tough polycarbonate cover, frame and alarm. When lifted to gain access to the protected unit, its optional battery powered alarm will sound.

Features:

• Color: White 
• Cover: Mini Stopper II with Horn 
• Button Activation: Key to reset.
  
  

This North American style, multipurpose push button switch and clear Mini Stopper II cover protect a wide range of applications indoors. The button incorporates a unique, patented design and the clear cover helps prevent accidental activation.

The highly advanced Stopper Station push button unit is ADA compliant. The button incorporates a unique, patented design that helps dramatically to stop accidental activation. Molded unit has a momentary mushroom button.

The Mini Stopper II offers excellent protection against physical damage (both accidental or intentional). Consists of a clear, tamperproof, super tough polycarbonate cover, frame and alarm. When lifted to gain access to the protected unit, its optional battery powered alarm will sound.

Features:

• Color: White 
• Cover: Mini Stopper II with Horn 
• Button Activation: Momentary mushroom
  
  

This North American style, multipurpose push button switch and clear Mini Stopper II cover protect a wide range of applications indoors. The button incorporates a unique, patented design and the clear cover helps prevent accidental activation.

The highly advanced Stopper Station push button unit is ADA Compliant. The button incorporates a unique, patented design that helps dramatically to stop accidental activation. Molded unit has a Turn-to-Reset button.

The Mini Stopper II offers excellent protection against physical damage (both accidental or intentional). Consists of a clear, super tough polycarbonate cover, frame and alarm. When lifted to gain access to the protected unit, its optional battery powered alarm will sound.

Features:

• Color: White 
• Cover: Mini Stopper II with Horn 
• Button Activation: Turn-to-Reset button
  
  

This unique and patented device has been helping stop false fire alarms around the world for more than 25 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind. 

Stopper II consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over manual pull stations. When lifted to gain access to the actual alarm, it sounds a piercing 95 dB or 105 dB warning horn. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Features:

• Cover is UV-stabilized against sun deterioration. 
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130). 
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• Polycarbonate rated -40ºF to 120ºF ( -40ºC to 49ºC). 
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
• Note: End user must verify the alarm and battery every six months and replace battery annually or as required.
  

This unique and patented device has been helping stop false fire alarms around the world for more than 25 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind. 

Stopper II consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over manual pull stations. When lifted to gain access to the actual alarm, it sounds a piercing 95 dB or 105 dB warning horn. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Features:

• Cover is UV-stabilized against sun deterioration. 
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130). 
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• Polycarbonate rated -40ºF to 120ºF ( -40ºC to 49ºC). 
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
• Note: End user must verify the alarm and battery every six months and replace battery annually or as required.
  

This unique and patented device has been helping stop false fire alarms around the world for more than 25 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind. 

Stopper II consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over manual pull stations. When lifted to gain access to the actual alarm, it sounds a piercing 95 dB or 105 dB warning horn. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Features:

• Cover is UV-stabilized against sun deterioration. 
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130). 
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• FM Approved. 
• Polycarbonate rated -40ºF to 120ºF ( -40ºC to 49ºC). 
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
• Note: End user must verify the alarm and battery every six months and replace battery annually or as required.
  

This unique and patented device has been helping stop false fire alarms around the world for more than 25 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind. 

Stopper II consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over manual pull stations. When lifted to gain access to the actual alarm, it sounds a piercing 95 dB or 105 dB warning horn. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Features:

• Cover is UV-stabilized against sun deterioration. 
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130). 
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• Polycarbonate rated -40ºF to 120ºF ( -40ºC to 49ºC). 
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
• Note: End user must verify the alarm and battery every six months and replace battery annually or as required.
  

This unique and patented device has been helping stop false fire alarms around the world for more than 25 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind. 

Stopper II consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over manual pull stations. When lifted to gain access to the actual alarm, it sounds a piercing 95 dB or 105 dB warning horn. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Features:

• Cover is UV-stabilized against sun deterioration. 
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130). 
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• Polycarbonate rated -40ºF to 120ºF ( -40ºC to 49ºC). 
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
• Note: End user must verify the alarm and battery every six months and replace battery annually or as required.
  

This unique and patented device has been helping stop false fire alarms around the world for more than 25 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind. 

Stopper II consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over manual pull stations. When lifted to gain access to the actual alarm, it sounds a piercing 95 dB or 105 dB warning horn. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Features:

• Cover is UV-stabilized against sun deterioration. 
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130). 
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• Polycarbonate rated -40ºF to 120ºF ( -40ºC to 49ºC). 
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
• Note: End user must verify the alarm and battery every six months and replace battery annually or as required.
  

Replacement horn for Stopper II units.

Blue replacement horn for Stopper II units.