You are here: Home > Shop Brands > Structured Voice & Data Cabling Products > Perfomance Systems > Fiber Components
We found 9 results matching your criteria.
Sort By:
Page of 1
Leviton 411288SM1 SpaceMaker Leviton 4926VFO Versi-Duct Vertical Slotted Duct 4x5" Front and 4"x4" Rear 83" H
Saves up to 80% installation labor time and REQUIRES NO RACK SPACE to install. The SpaceMaker works well for both new installations or retrofits.
Features:
  • Cables are supported out in front of metal rack while maintaining port accessibility.
  • The SpaceMaker can also be used to support cables in the back of the rack.
  • Attached hook and loop ties help manage cables without wasting rack space.
  • Allows cable management of 24 to 96 ports.
  • No need to move existing panels, because the SpaceMaker uses existing screws on patch panels or electronics; simply loosen screws, slide SpaceMaker in, then re-tighten screws.
  • Knock-off mounting tabs fit all equipment by using standard rack screw-hole pattern.
  • Multiple SpaceMakers can be mounted one on top of another and even upside-down.
  • Made of 14-gauge steel.
Leviton's Versi-Duct™ Vertical Slotted Duct System provides a versatile simple solution for fiber and copper cable organization and management. Vertical ducts come in Front Only or Front & Rear configurations with cable-concealing covers, and mount on standard 19" TIA equipment racks with top, bottom or side cable entry.

Unique spacers allow the duct to be used to its full capacity, while providing an efficient use of space. Combine two 35" vertical ducts or use one 83" vertical duct to span a standard 7-foot equipment rack. Leviton's Versi-Duct System also includes horizontal ducts and an array of accessories making it ideal for efficient, adaptable rack and frame cable management.
Features:

  • Offered in Front & Rear and Front Only versions.
  • Suitable for copper and fiber applications.
  • Extended 1RU and 2RU Front Covers.
  • Spacers provide 100% fill rate.
Leviton 49275VFR Versi-Duct Vert. Slotted Duct 4x5" Front and 4"x4" Rear 35" H Leviton 49882ZAD ST Adapter w/ Zirconia Sleeve
Leviton's Versi-Duct™ Vertical Slotted Duct System provides a versatile simple solution for fiber and copper cable organization and management. Vertical ducts come in Front Only or Front & Rear configurations with cable-concealing covers, and mount on standard 19" TIA equipment racks with top, bottom or side cable entry.

Unique spacers allow the duct to be used to its full capacity, while providing an efficient use of space. Combine two 35" vertical ducts or use one 83" vertical duct to span a standard 7-foot equipment rack. Leviton's Versi-Duct System also includes horizontal ducts and an array of accessories making it ideal for efficient, adaptable rack and frame cable management.
Features:

  • Offered in Front & Rear and Front Only versions.
  • Suitable for copper and fiber applications.
  • Extended 1RU and 2RU Front Covers.
  • Spacers provide 100% fill rate
Leviton 49886DLM LC Duplex Clips (MULTIMODE) Leviton 5R46000N Universal Fiber Panel 2RU Panel w/ Polycarb. Door No Lock
LC Duplex Clips keep two Fast Cure LC connectors together to maintain "transmit/receive" fiber integrity. Offered in singlemode and multimode versions The patch panel shall accommodate fiber adapters in 3.5" rack space (2 rack units) or have the capability to be attached directly to the wall via brackets. Adapters shall be mounted on metal plates, and attached to the patch panel using plastic plungers. The mounting plates shall have a port designation number stamped into the metal near the adapter. The patch panel shall have front and rear doors as well as lids that can be easily removed. The doors must also open to less than 90 degrees and be designed to be used as a work surface. There shall be vertical ingress/egress features in the form of slots in the top, bottom and sides of the panel, both front and rear. The panel shall provide strain relief in the form of a grounding lug and multiple tie wrap points. The panel must have mounting ears that allow mounting on 19" or 23" hole centers in either a mid- or flushmount configuration. The panel shall have dual plastic rings made of high impact UL 94V-0 rated fire-retardant plastic. These rings must be stackable and adjustable. A port identification label/card shall be provided. The panel shall be made of 18 gauge steel, painted black.
Leviton 5W11000N Small Wall Mount Fiber Optic Patch Panel, Empty with solid metal door, no lock Leviton 5W12000N Small Wall Mount Fiber Optic Patch Panel, Empty with split metal door and one lock/key
The Small Wall Mount Panel is a 8.0" high, wall-mount unit that accommodates up to two mounting plates, and can support a variety of different adapters, including ST®, FC, SC, and MT-RJ™. Like other Leviton Fiber Panels, the Small Panel incorporates many innovative design features at little additional cost.


Features:
  • Rugged 16-gauge heavy steel with a black painted finish and trimmable, self-healing grommets.
  • Doors are L-shaped for maximum access to couplings through the open sidewall.
  • Door options: split with single lock, split with two locks (custom option), solid with single lock, solid without lock.
  • Unique cable management ring is adjustable and stackable to simplify fiber loop installation, bend radius compliance, and future maintenance/additions. Stores 3 meters of 900 micron fiber per adapter.
  • Room for up to 2 mounting plates, supporting 48 fibers in MT-RJ, 24 fibers in SC adapters, or 16 fibers in ST adapters.
  • Sidewall cutout gives completely unobstructed access to the bulkheads when door is open (covered when door is closed).
The patch panel shall accommodate fiber adapters in 3.5" rack space (2 rack units) or have the capability to be attached directly to the wall via brackets. Adapters shall be mounted on metal plates, and attached to the patch panel using plastic plungers. The mounting plates shall have a port designation number stamped into the metal near the adapter. The patch panel shall have front and rear doors as well as lids that can be easily removed. The doors must also open to less than 90 degrees and be designed to be used as a work surface. There shall be vertical ingress/egress features in the form of slots in the top, bottom and sides of the panel, both front and rear. The panel shall provide strain relief in the form of a grounding lug and multiple tie wrap points. The panel must have mounting ears that allow mounting on 19" or 23" hole centers in either a mid- or flushmount configuration. The panel shall have dual plastic rings made of high impact UL 94V-0 rated fire-retardant plastic. These rings must be stackable and adjustable. A port identification label/card shall be provided. The panel shall be made of 18 gauge steel, painted black.
Panasonic KX-FAT451 Toner Cartridge for KX-MB3020
- Panasonic 5,000 page toner cartirdge for KX-MB3020

KXFAT451
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please