You are here: Home > Shop Brands > B-Line > Spring Steel Fasteners
We found 15 results matching your criteria.
B-Line's Spring Steel Fasteners include products for attachment to metal studs, steel beams, acoustical tee, drywall, purlins, and channel.
Sort By:
Page of 2
B-Line BA12 Box Hanger - Sold 50/Box only B-Line BA50A Adjustable Box Hanger for T-Bar
Electrical Box T-Bar Fasteners

Features:

  • See BA50 for a better solution.
  • Supports octagonal or square boxes.
  • Allows for flush mounting or 3/4" offset for plaster ring.
  • One BB27 box mounting clip with screw included with each hanger.
  • Load Capacity: 20 lbs.
  • For additional support, attach dropwire to BB27 Box Mounting Clip.
  • Warning: Do not use for hanging acoustical tee.
Adjustable Box Support

Features:

  • Adjustable box support for suspended ceilings.
  • Accomodates heights from 11/2” to 83/4”.
  • Integral ruler enables height adjustments without measuring.
  • Ideal for installation of speaker cases, emergency light fixtures, etc. in suspended ceilings.
  • Static Load Capacity:
    25 Lbs. without dedicated dropwire
    70 Lbs. with dedicated dropwire
    35 Lbs. (Canada) with dedicated dropwire
B-Line BB10 Cover Plate Bracket, Single Gang B-Line BB10P PLASTIC COVER PLATE MOUNTING BRACKET, SINGLE GANG
Cover Plate Mounting Brackets

Features:

  • Replaces electrical box in Class 2 low voltage installations.
  • Provides attachment base for low voltage outlets.
  • Accepts Decora®* style cover plates.
  • Maximum 11/4” drywall thickness.
  • Finish: Pre-galvanized
Plastic Cover Plate Mounting Bracket

Features:

  • Provides attachment base for low voltage outlets.
  • Replaces electrical box in Class 2 low voltage installations.
  • Design eliminates sharp edges from bracket.
  • Maximum wall thickness: 3/4”
B-Line BC1  CONDUIT TO BEAM FASTENER, THRU 1/2" FLANGE B-Line BCH21-RB Angle Bracket Fastener, 1 5/16" Hook, .265-Inch Diameter 50/box
Conduit To Beam Fasteners

Features:

  • Fits beam flanges thru 1/2" thick.
  • Accepts "S" hooks, 1/4" and 3/8" threaded rod, 1/4"-20 or #10-24 threaded bridle rings.
  • Supports conduit and electrical boxes.
Angle Bracket Cable Fasteners

Features:

  • Designed for direct attachment to structures.
  • Supports cable from 1/4” threaded rod.
  • .265” diameter hole accepts anchors, screws or common nails.
  • Qwik-Latch cable retainer included with each hook.
  • Static Load Capacity: 30 Lbs.
  • Finish: Pre-galvanized
B-Line BCH32 CABLE HOOK, 2", 70 4-PAIR UTP B-Line BCH32-AB CABLE TO ATR, 2" HOOK, .505-INCH DIAMETER 100 min. order
Cable Hooks

Features:

  • Supports Cat. 5/5e/6, fiber optic, innerduct and low voltage cabling requirements.
  • Qwik-Latch™ cable retainers included with hooks.
  • Static Load Capacity: 30 Lbs.
Cable To ATR Fasteners

Features:

  • .505” diameter hole designed to support cable from 3/8” or 1/2” threaded rod.
  • Allows back-to-back and multi-tier installations.
  • Qwik-Latch cable retainer included with each hook.
  • Static Load Capacity: 30 Lbs.
  • Finish: Pre-galvanized
B-Line BCH64-AB CABLE TO ATR, 4" HOOK, .505-INCH DIAMETER 25 min. order B-Line BR-32-4W THREADED BRIDLE RING, LAG SCREW, 2" RING, 1/4"
Cable To ATR Fasteners

Features:

  • .505” diameter hole designed to support cable from 3/8” or 1/2” threaded rod.
  • Allows back-to-back and multi-tier installations.
  • Qwik-Latch cable retainer included with each hook.
  • Static Load Capacity: 30 Lbs.
  • Finish: Pre-galvanized
Threaded Bridle Rings

Lag Screw for Wood Beams

Features:

  • Supports low voltage communication cables from beams or rods when used with other fasteners.
  • Ultimate Static Load Capacity: 50 Lbs.
  • Finish: Zinc Plated
B-Line BRC4M CABLE SUPPORT, UP TO 1" O.D. B-Line BRS-32 BRIDLE RING SADDLE, 2" SADDLE ONLY
Cable Support

Features:

  • Metal cable support can be used in plenum-rated areas.
  • Longer locking tabs.
  • Hinge can be opened for greater cable capacity.
  • Allows cables to be positioned a minimum of 11/4" from face of stud as required by NEC Article 300.4(D).
Bridle Ring Saddles

Features:

  • The convenience of a bridle ring with the cable-bearing surface of a hook.
  • 2” saddle is available separately. Can be easily attached before or after cable installation.
   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please