Use the 2-Channel VGA Booster and put two color monitors where you want them. Then you can keep your CPUs in a safe, clean, central location for easy access—and away from prying fingers and dusty, industrial environments.
You can send VGA signals up to 700 feet (213.3 m) to each monitor. At 800 x 600 resolution, the booster extends XGA® and Super VGA signals 600 feet (182.8 m). At 1024 x 768 resolution, your distance limit is 500 feet (152.4 m). Because the outputs operate independently, you can use different cable lengths for each monitor. Just turn the two front-panel knobs to choose the cable length you need for each monitor.
The booster’s advanced circuitry also ensures that your VGA signal will be free of distortion, giving you clear, crisp images on your monitors. Plus, the circuitry reduces the number of connector wires required, so you save more money by using less cable.
The 2-Channel VGA Booster is plug-and-play easy—just plug in the cables and go.
The FiberPath from Black Box is the cost-effective way to transmit video over fiber. It delivers clean, crisp video transmissions by transmitting quality color or black-and-white video over standard multimode fiber optic cable. The FiberPath is ideal for use in both indoor and outdoor industrial environments.
Your video camera can be up to 1.5 miles (2.4 km) from your video monitor. Simply attach your CCTV camera or other video source to the transmiter with standard coax cable. The FiberPath is compatible with all standard analog video formats, including NTSC, PAL, and SECAM. Then connect terminated fiber optic cable between the transmitter and receiver—all you need is a screwdriver. Once it’s installed, the FiberPath operates without any attention from you for years to come!
Say goodbye to bulky, expensive, and difficult-to-terminate VGA cable. Use BLACK BOX® Mini CAT5 Extenders and Mini CAT5 Splitter/Extenders to set up video monitors up to 500 feet (152.4 m) at resolutions of 1024 x 768 at 60 Hz or up to 300 feet (91.4 m) at resolutions of 1600 x 1200 at 85 Hz from your PC or video source by using ordinary CAT5 UTP cable.
These extenders enable you to easily place video displays such as monitors or LCD screens where you need them to display information such as schedules, menus, or advertising.
They’re easy to install. Just plug a standard CAT5 cable, up to 500 feet long, between the two units. A pair of extenders requires only a single power supply, which can be plugged in at either end of the link. The extender/splitter requires a power supply at the transmitter end only to power a link to all connected receivers.
Mini CAT5 Extender Kits:
Mini CAT5 Splitter/Extenders:
Ordering instructions: To connect a single video source to a single receiver, order the AC504A or AC504A-CP Or connect a single video source to multiple receivers, first order an AC600A or AC601A transmitter, then order one AC602A receiver for each connected video display.
The AC504A kit includes: (1) transmitter, (1) receiver, and (1) power supply and (1) VGA cable, male/male.