iCLASS® smart reader/writers and cards make access control and read/write applications more powerful, more versatile, and most importantly, offer enhanced security through encryption and mutual authentication.

At the same time, iCLASS is user-friendly, delivering the convenience, affordability and reliability of proximity technology, for which HID is known worldwide.

Using the 13.56 MHz technology platform, the iCLASS RW400 contactless smart card reader/writer combines the longer read range of proximity with the power and heightened security of smart card technology.

Supporting read/write applications, the RW400 reads/writes user data to HID iCLASS credentials that offer either 2k bit (256 Byte), 16k bit (2k Byte) or 32k bit (4k Byte) of data storage. Read/write applications include IT secure authentication, biometric template storage, digital cash, time and attendance, equipment/material use or checkout and transit passes.

• Use one reader to read standard proximity format data from HID iCLASS credentials or unique serial numbers from MIFARE® cards.
• Confidently install the reader knowing that the Wiegand output easily interfaces with most existing Wiegand protocol access control panels.
• To support read/write applications, the bi-directional RS232 serial port provides connection to a PC or microcontroller.

Appreciate advanced security:

• All RF data transmission between the card and reader is encrypted using a secure algorithm.
• By using industry-standard encryption techniques and advanced key management systems, iCLASS reduces the risk of compromised data or duplicated cards.

Be secure in knowing:

iCLASS® smart reader/writers and cards make access control and read/write applications more powerful, more versatile, and most importantly, offer enhanced security through encryption and mutual authentication.

At the same time, iCLASS is user-friendly, delivering the convenience, affordability and reliability of proximity technology, for which HID is known worldwide.

Using the 13.56 MHz technology platform, the iCLASS RW400 contactless smart card reader/writer combines the longer read range of proximity with the power and heightened security of smart card technology.

Supporting read/write applications, the RW400 reads/writes user data to HID iCLASS credentials that offer either 2k bit (256 Byte), 16k bit (2k Byte) or 32k bit (4k Byte) of data storage. Read/write applications include IT secure authentication, biometric template storage, digital cash, time and attendance, equipment/material use or checkout and transit passes.

• Use one reader to read standard proximity format data from HID iCLASS credentials or unique serial numbers from MIFARE® cards.
• Confidently install the reader knowing that the Wiegand output easily interfaces with most existing Wiegand protocol access control panels.
• To support read/write applications, the bi-directional RS232 serial port provides connection to a PC or microcontroller.

Appreciate advanced security:

• All RF data transmission between the card and reader is encrypted using a secure algorithm.
• By using industry-standard encryption techniques and advanced key management systems, iCLASS reduces the risk of compromised data or duplicated cards.

Be secure in knowing:

T= RS232, 00 = Beep on, LED normally red, reader flashes green on tag read

RW100 Contactless Smart Card Reader

• Expansion Modularity - Every RW (read/write) reader comes with an expansion socket that accepts
  RS232, RS485 or USB communication modules. The readers can read or write to any application area
  on the iCLASS® credential, with all reader functions controlled by an external host processor via the
  selected serial interface using the iCLASS serial protocol.
   
• Secure - All RF data transmission between the card and reader is encrypted using a secure algorithm. By
  using industry-standard encryption techniques and advanced key management systems, iCLASS reduces
  the risk of compromised data or duplicated cards.
   
• Interoperability - iCLASS is based on international ISO interoperability standards providing compatibility
  with many popular card technologies (ISO 15693, ISO 14443A and ISO 14443B).
   
• Optimal Read Range Performance - An auto-tuning feature automatically adjusts the reader for optimal
  read range performance on any mounting surface.

iCLASS 13.56 MHz contactless smart cards and readers make access control more powerful, more
versatile and offer enhanced security through data encryption and mutual authentication between the card
and reader.

iCLASS readers are user-friendly, delivering the same convenience and reliability of HID’s world-renowned
Prox technology, with state-of-the-art features, driven by the ever-evolving industry requirements.

Providing read/write capability, iCLASS is the platform of choice for custom applications. With HID iCLASS
credential data storage capacities of 2k bit (256 Byte), 16k bit (2k Byte) or 32k bit (4k Byte), this reader line
allows for secure bi-directional data exchange between card and reader by reading and writing user data to
iCLASS cards. iCLASS-enabled read/write applications include biometric template storage, cashless vending,
time and attendance, alarm system control, HVAC control, process control, and point of sale terminals.

The RW series enables development using versatile tool kits. Use the iCLASS Software Development
Kit (SDK) for Windows GUI development, or iCLASS Serial Protocol Document for low-level command
structure. Both kits include sample applications and source code. Commands can be sent via the RS232,
RS485 or USB hardware protocol.

iCLASS® smart reader/writers and cards make access control and read/write applications more powerful, more versatile, and most importantly, offer enhanced security through encryption and mutual authentication.

At the same time, iCLASS is user-friendly, delivering the convenience, affordability and reliability of proximity technology, for which HID is known worldwide.

Using the 13.56 MHz technology platform, the iCLASS RW400 contactless smart card reader/writer combines the longer read range of proximity with the power and heightened security of smart card technology.

Supporting read/write applications, the RW400 reads/writes user data to HID iCLASS credentials that offer either 2k bit (256 Byte), 16k bit (2k Byte) or 32k bit (4k Byte) of data storage. Read/write applications include IT secure authentication, biometric template storage, digital cash, time and attendance, equipment/material use or checkout and transit passes.

• Use one reader to read standard proximity format data from HID iCLASS credentials or unique serial numbers from MIFARE® cards.
• Confidently install the reader knowing that the Wiegand output easily interfaces with most existing Wiegand protocol access control panels.
• To support read/write applications, the bi-directional RS232 serial port provides connection to a PC or microcontroller.

Appreciate advanced security:

• All RF data transmission between the card and reader is encrypted using a secure algorithm.
• By using industry-standard encryption techniques and advanced key management systems, iCLASS reduces the risk of compromised data or duplicated cards.

Be secure in knowing:

6190 A K = Black N = None, 00 = Beep on, LED normally red, reader flashes green on tag read

BIO500 Module

Using 13.56 MHz contactless smart card technology, the bioCLASS products provide users with new
options for supporting multi-authentication of identity. Combine a contactless card presentation with
a fingerprint biometric. Or, use a personal identification number (PIN) number along with a
contactless card presentation.

The bioCLASS products provide three levels of fingerprint verification. During the enrollment process,
the RWKLB575 is connected to your PC via a USB port. The software will guide the user to place their
finger on the sensor. The fingerprint template is collected at the unit and immediately transferred to the
card. During this enrollment process, the fingerprint template is stored ONLY on the card; it is never
transmitted to an external host. During verification at the door, the LCD graphical display will assist the user
with instructions about finger placement on the biometric sensor.

• The finger pad at the bottom center of the biometric unit offers ease-of-use for either right or
  left-handed enrollment.
• The location of the finger pad is compliant with ADA standards.
• Field upgrade from the keypad with LCD display (RWKL550) to a biometric solution costeffectively
  and with no downtime.

User function keys and LCD screen directs users to proper usage and finger placement.
Fingerprint templates are stored on the iCLASS card and not in the reader. This results in:
 

• Increased security
• Faster throughput
• Easier system management
• Lower costs for the biometric reader
• Reduced concerns over individual privacy

Choose the level of security that meets your needs.
 

• Card and PIN
• Card and fingerprint
• Card, PIN, and fingerprint

• A multi-technology 13.56 MHz interface that meets ISO 14443A (MIFARE®), 14443B2, and 15693 standards.
• The ability to read 32 bit MIFARE serial numbers.
• Highly secure 64 bit diversified keys for mutual authentication.
• Encrypted data transfer between the card and the reader through the use of secure algorithms.
• Advanced key management systems to reduce the risk of compromised data or duplicated cards.
• A Wiegand output that easily interfaces with most existing Wiegand protocol access control panels.
• Crisp architectural styling with an elegantly curved faceplate.
• An easy-to-install, three-part reader, compatible with global electrical back boxes, and made more secure with the addition of a tamper magnet* and security screw.
• A factory or field configurable tri-color light bar and multi-tone speaker that provides distinguishable indicators for both the visually and hearing impaired.
• A choice of colors (black or gray) with a standard 18" (.5 m) cable pigtail.
• Confidently install iCLASS contactless smart card readers, knowing that the Wiegand output easily interfaces with most existing Wiegand protocol access control panels.

*Tamper magnet is built into all models except the R10.

CP575A Card Programmer

The iCLASS CP575A Card Programmer is designed for on-site programming of access control data, Personal Identification Number (PIN) codes, and user data onto HID iCLASS cards. It allows HID proximity formats, keypad PIN codes and user data fields to be programmed directly into iCLASS contactless smart cards. This enables the system manager to stock blank cards and program cards on demand when new cardholders are added to the system. To ensure security of the format and cards, an iCLASS Card Programmer license is required.

The iCLASS CP575A Card Programmer adds fingerprint template program capability for use with the bioCLASS reader. the iCLASS CP575A includes a desktop reader/writer, CD-ROM with programming software and documentation, personalization diskette, universal power supply and USB cable.

Additional Capabilities

• Stores PIN codes on the card for use with the iCLASS RK40, RWK400, and RWKL550 keypad readers configured for local PIN verification.
• Programs four, 16-character user data fields on the card, that can later be read on the programmer.
• Reads any iCLASS card when the authentication key is pre-stored in the programmer.
• Prints card numbers directly onto the cards using a PVC card printer or on standard Avery labels.
• Maintains a secure, encrypted database on a personal computer.
• Personalized for individual customers (proprietary formats are restricted to authorized users).
• CP575A Card Programmer provides USB user interface capability.

6100BGN0002 R10 I CLASS READER

G = Charcoal Gray, N = Pigtail 18 (0.5 meter), 00 = Beep on, LED normally red, reader flashes green on tag read, 0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key), 2 = 26 bit

iClass R10 Contactless Smart Card Reader

K = Black, T = Terminal Strip, 00 = Beep on, LED normally red, reader flashes green on tag read, 0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)

iClass R10 Contactless Smart Card Reader

G = Charcoal Gray, N = Pigtail 18” (0.5 meter), 00 = Beep on, LED normally red, reader flashes green on tag read

R30 Contactless Smart Card Reader

13.56 MHz EU/Asian Back Box Contactless Smart Card Reader (Read Only)

• Base Model Number: 6110
• Designed to cover 80 mm x 80 mm square European back boxes.
• Slotted mounting plate also provides for Asian back box spacing.
• Provides a standard Wiegand output.
• Dimensions: 3.30" x 3.30" x .75" (8.38 cm x 8.38 cm x 1.91 cm).

K = Black, N = Pigtail 18” (0.5 meter), 00 = Beep on, LED normally red, reader flashes green on tag read

R30 Contactless Smart Card Reader

13.56 MHz EU/Asian Back Box Contactless Smart Card Reader (Read Only)

• Base Model Number: 6110
• Designed to cover 80 mm x 80 mm square European back boxes.
• Slotted mounting plate also provides for Asian back box spacing.
• Provides a standard Wiegand output.
• Dimensions: 3.30" x 3.30" x .75" (8.38 cm x 8.38 cm x 1.91 cm).

K = Black, N = Pigtail 18” (0.5 meter), 03 = Beep off, LED normally off, reader flashes green on tag read

R30 Contactless Smart Card Reader

13.56 MHz EU/Asian Back Box Contactless Smart Card Reader (Read Only)

• Base Model Number: 6110
• Designed to cover 80 mm x 80 mm square European back boxes.
• Slotted mounting plate also provides for Asian back box spacing.
• Provides a standard Wiegand output.
• Dimensions: 3.30" x 3.30" x .75" (8.38 cm x 8.38 cm x 1.91 cm).