You are here: Home > Shop Brands > Crown Audio > Amp Accessories
We found 5 results matching your criteria.
Sort By:
Page of 1
Crown Audio 1-VCAP Wall VCA Remote Control Crown Audio 103328133 Power Cord for Amplifiers
Used in conjunction with a VCA-MC module, these single-gang, wall-mounted panels provide remote volume control for one or more CTs amplifier channels (for any CTs multi-channel model). The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers (for any CTs multi-channel model) The potentiometer(s) on the panel are wired directly to one of the VCA connectors on the VCA-MC. Crown Audio 103328133 Power Cord for Amplifiers
Crown Audio 1VCAP Single Wall-Mount Panel Potentiometers (Provide Remote Control) Crown Audio 4VCAP Wall-Mount Panel Potentiometers (Provide Remote Control)
The 1-VCAP and 4-VCAP Wall-mounted Panels provide remote volume control for one or more VCA-controlled channels. The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers.

The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC module accessories for CTs 4- and 8-channel amplifiers, or to the VCA connections on Commercial Audio Series products.

  • Independent remote level control for each channel.
  • 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er channels.
  • Optional wall-mount level control panels for use with VCA modules: 1-VCAP and 4-VCAP.
  • A VCA-MC module provides independent remote level control for each channel. 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er chassis. Thus, the 4-channel CTs 4200 uses two connectors; the 8-channel CTs 8200 uses four connectors.
  • Crown CTs 4200 and 8200 amplifiers can be supplied with a VCA-MC module already factory-installed, or your choice of MC modules can be easily added to the amplifier by any authorized Crown Service Center.
  • Mounted on a single gang wall plate
  • Fits into a single gang electrical box
  • Great sounding remote volume control, using low cost easy-to-install "twisted pair" wiring

    Specifications:

  • Number of Potentiometers: 4
  • Potentiometer Resistance: 5 k ohms
  • Pins: VCA, GND, +10V (x4)
  • Weight: 6.5 oz (184 g)
  • Dimensions: 4-1/2 in x 4-1/2 in (11.4 cm x 11.4 cm) (Fits into a 2-gang electrical box.)
  • The 1-VCAP and 4-VCAP Wall-mounted Panels provide remote volume control for one or more VCA-controlled channels. The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers.

    The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC module accessories for CTs 4- and 8-channel amplifiers, or to the VCA connections on Commercial Audio Series products.

    This is a two gang panel with four potentiometers that provide remote volume control for four or more CT's amplifier channels. The potentionmeters on the panel are wired directly to the VCA connectors on the VCA-MC.

    4-VCAP: This is a two-gang panel with four potentiometers that provide remote volume control for four or more CTs amplifier channels. The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC.

  • Independent remote level control for each channel.
  • 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er channels.
  • Optional wall-mount level control panels for use with VCA modules: 1-VCAP and 4-VCAP.
  • A VCA-MC module provides independent remote level control for each channel. 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er chassis. Thus, the 4-channel CTs 4200 uses two connectors; the 8-channel CTs 8200 uses four connectors.
  • Crown CTs 4200 and 8200 amplifiers can be supplied with a VCA-MC module already factory-installed, or your choice of MC modules can be easily added to the amplifier by any authorized Crown Service Center.

    Specifications:

  • Number of Potentiometers: 4
  • Potentiometer Resistance: 5 k ohms
  • Pins: VCA, GND, +10V (x4)
  • Weight: 6.5 oz (184 g)
  • Dimensions: 4-1/2 in x 4-1/2 in (11.4 cm x 11.4 cm) (Fits into a 2-gang electrical box.)
  • Crown Audio T170V Wall VCA Remote Control
    A single autoformer that provides the same impedance matching capability as the TP-170V, for a single channel. The T-170V is ready to be mounted in a rack, or enclosed in a metal box.

    Provides 100V output in Dual mode when used with CTs 600, CTs 1200, CTs 4200 and CTs 8200 amplifiers
    Allows amplifiers without direct Constant-Voltage capability to be easily integrated into distributed systems
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please