You are here: Home > Shop Brands > TAKEX > Security > Indoor/Outdoor Flame Sensors
We found 3 results matching your criteria.
Sort By:
Page of 1
Takex America (Pulnix) FS-1000E Flame Sensor Takex America (Pulnix) FS-2000E Flame Sensor 33' Range UL Listed
The FS-Series flame sensors are designed to detect ultraviolet rays in flames. With a detection range of approximately 33' they either activate a built-in alarm sounder or are connected to a remote panel annunciating device.

  • Detection System Ultra Violet Ray Detection
  • Wavelength 180 to 260nm
  • Response Time Switch Selectable
  • H (0.2sec.) - M (1sec.) - L (6sec.)
  • The FS-Series flame sensors are designed to detect ultraviolet rays in flames. With a detection range of approximately 33' they either activate a built-in alarm sounder or are connected to a remote panel annunciating device.

  • UL Listed!
  • 33' detection range,
  • Built-in sounder,
  • 10V to 30VDC power,
  • Adjustable angle of sensing element,
  • Form "C" Relay,
  • Tamper Circuit,
  • Selectable detection times.

    Flame sensor FS-2000E quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an external output. Power should be wired to 10-30VDC.

  • Equipped with Tamper output

    Specifications Model FS-2000E

  • Detection System Ultra Violet Ray Detection
  • Wavelength 181 to 260nm
  • Response Time Switch Selectable (0.2sec.) - (1sec.) - (6sec.) - (30sec.)
  • Alarm Output Dry Relay Contact N/O - C - N/C
  • Reset: Approx. 2 secs.
  • Contact Rating 30VAC/DC 0.3A Max
  • Alarm Led Red On at Alarm
  • Supply Power 10 to 30VDC ( non polarity)
  • Current Consumption Stand by: 25mA Max.
  • 75mA Max: At Alarm with buzzer ON
  • 40mA: Max At Alarm with buzzer OFF
  • Ambient Temperature +14?F to + 140?F (-10?C to + 60?C)
  • Installation Indoor Ceiling or Wall Mount Wiring Terminals on the Base
  • Weight 5.3oz (150g)
  • External Appearance Sensor: ABS Resin (white)

    PU-FS2000E

  • Takex America (Pulnix) FS-5000E Flame Sensor
    The FS-Series flame sensors are designed to detect ultraviolet rays in flames. With a detection range of approximately 33' they either activate a built-in alarm sounder or are connected to a remote panel annunciating device.

    Features
  • 2 sensetivity settings - High and Low
  • 4 detection timer settings: 1/6/15/30 seconds
  • Area masking enables elimination of unnecessary detection areas

    Alarm memory function - Memory indication function enables identification of individual sensors inmultiple sensor on figuration.
    Day/Night Time Discernment - by adjusting operation mode control switch, the output operation can be controlled according to the ambient light level.

    Specifications
  • Detection System Ultra Violet Ray Detection
  • Wavelength: 183 to 260nm
  • Response Time Switch Selectable:(0.2sec.) - (1sec.) - (6sec.) - (30sec.)
  • Alarm Output: Dry Relay Contact N/O - C - N/C
  • Reset: Approx. 2 secs.
  • Contact Rating 30VAC/DC 0.5A Max
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please