You are here: Home > Shop Brands > TAKEX > Security > Photoelectric Beams
We found 40 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Photoelectric Beams

  Photoelectric Beam Towers
Photoelectric Beam Towers
Sort By:
Page of 4
Takex America (Pulnix) BT-100SS 3-Meter Single-Sided Beam Tower Takex America (Pulnix) BT-150  4'-11" Dual-Sided Photoelectric Beam Tower
Takex America (Pulnix) BT-100SS 3-Meter Single-Sided Beam Tower The BT Dual Sided Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 360 protection range, giving the beams the possibility to be mounted back to back at any height within the tower.

The BT Series has been designed to allow the use of any TAKEX twin or quad based photoelectric beam. (The BT-WM Wall Mount Series is also available as a single sided tower that mounts directly to a flat surface).

The BT Series Dual Sided towers provide single or multiple beam options withexternal ranges of up to 200 meters (660ft). The photoelectric beams can be fixed at any height thanks to the adjustable fixings included in each tower. To enhance mounting options and obtain 360 protection, beams can be mounted back to back at any height.

The 100, 150, 200 and 300cm (3' 3.4; 4' 11; 6' 6.7 and 9' 10) can be adjusted to most situations required by our customers. However, in particular situations, special sizes can be manufactured. The towers can either be mounted directly onto the floor or using the optional floor bracket (BT-FB) designed to be set into concrete, or for wall mounting there is the optional wall-mounted bracket BT-WB.

Each column is delivered with detailed documentation and instructions, making installation easy and less time consuming. The tops are supplied with a tamper switch as standard. There is an optional pressure sensing (anti climb) top available (BT-PS). In order to obtain optimal performance in external environments with low temperature conditions and condensation risk, the tower should be fitted with at least one heater.

A mounting kit including expandable bolts is included with every BT tower: Stainless screws, nylock nuts, sealing strips, expanding bolts, etc.

Takex America (Pulnix) BT-200  6'-6.7" Dual-Sided Photoelectric Beam Tower Takex America (Pulnix) BT-300  9'-10" Dual-Sided Photoelectric Beam Tower
The BT Dual Sided Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 360 protection range, giving the beams the possibility to be mounted back to back at any height within the tower.

The BT Series has been designed to allow the use of any TAKEX twin or quad based photoelectric beam. (The BT-WM Wall Mount Series is also available as a single sided tower that mounts directly to a flat surface).

The BT Series Dual Sided towers provide single or multiple beam options withexternal ranges of up to 200 meters (660ft). The photoelectric beams can be fixed at any height thanks to the adjustable fixings included in each tower. To enhance mounting options and obtain 360 protection, beams can be mounted back to back at any height.

The 100, 150, 200 and 300cm (3' 3.4; 4' 11; 6' 6.7 and 9' 10) can be adjusted to most situations required by our customers. However, in particular situations, special sizes can be manufactured. The towers can either be mounted directly onto the floor or using the optional floor bracket (BT-FB) designed to be set into concrete, or for wall mounting there is the optional wall-mounted bracket BT-WB.

Each column is delivered with detailed documentation and instructions, making installation easy and less time consuming. The tops are supplied with a tamper switch as standard. There is an optional pressure sensing (anti climb) top available (BT-PS). In order to obtain optimal performance in external environments with low temperature conditions and condensation risk, the tower should be fitted with at least one heater.

A mounting kit including expandable bolts is included with every BT tower: Stainless screws, nylock nuts, sealing strips, expanding bolts, etc.

The BT Dual Sided Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 360 protection range, giving the beams the possibility to be mounted back to back at any height within the tower.

The BT Series has been designed to allow the use of any TAKEX twin or quad based photoelectric beam. (The BT-WM Wall Mount Series is also available as a single sided tower that mounts directly to a flat surface).

The BT Series Dual Sided towers provide single or multiple beam options withexternal ranges of up to 200 meters (660ft). The photoelectric beams can be fixed at any height thanks to the adjustable fixings included in each tower. To enhance mounting options and obtain 360 protection, beams can be mounted back to back at any height.

The 100, 150, 200 and 300cm (3' 3.4; 4' 11; 6' 6.7 and 9' 10) can be adjusted to most situations required by our customers. However, in particular situations, special sizes can be manufactured. The towers can either be mounted directly onto the floor or using the optional floor bracket (BT-FB) designed to be set into concrete, or for wall mounting there is the optional wall-mounted bracket BT-WB.

Each column is delivered with detailed documentation and instructions, making installation easy and less time consuming. The tops are supplied with a tamper switch as standard. There is an optional pressure sensing (anti climb) top available (BT-PS). In order to obtain optimal performance in external environments with low temperature conditions and condensation risk, the tower should be fitted with at least one heater.

A mounting kit including expandable bolts is included with every BT tower: Stainless screws, nylock nuts, sealing strips, expanding bolts, etc.

Takex America (Pulnix) COM-IN-50HF 155' Outdoor 330' Indoor Double Quad Beam Micro Combo Takex America (Pulnix) COMIN50HF 155'  Outdoor / 330' Indoor Double Quad Beam,   Intelligent Modulator Micro Combo
The COM-IN-50HF consists of 4-stacked photoelectric beams and 24.1 GHz microwave which reinforces the unit's range and stability in severe weather conditions. A special anti-frost/dew hood protects the beam even when the cover is screened by inclement weather.

When the beam reception level is reduced below an acceptable level by poor weather conditions, an environmental output selector initiates an environmental signal. In addition, a special sensetivity attenuation LED lights up in cases of low sensitivty.

Additional Features
  • Alarm memory LED indicated which sensor issues an alarm when two or more sensors are placed on a zone.
  • Photoelectric beam sensor features 4 synchronized high-ower infrared beams.
  • Four frequency selections make it possible to avoid crosstalk between sensors.

    Specifications
  • 165' Outdoor Combination Intelligent Double Modulated Quad Photoelectric Beam and Microwave sensor,
  • Improved catch performance during difficult weather conditions,
  • Auto Gain control,
  • Environmental Monitoring circuit,
  • 2 frequencies available,
  • Tamper circuit,
  • 12V to 30VDC
  • Takex America (Pulnix) COMIN50HF 155'  Outdoor / 330' Indoor Double Quad Beam,   Intelligent Modulator Micro Combo
    Takex America (Pulnix) MW50  Photo Beam Microwave Sensor W/ Transmitter and Receiver Takex America (Pulnix) PB-100HFTR  Transmitter for PBIN100HF - Transmitter Only
    Takex America (Pulnix) MW50  Photo Beam Microwave Sensor W/ Transmitter and Receiver Takex America (Pulnix) PB-100HFTR  Transmitter for PBIN100HF - Transmitter Only
    Takex America (Pulnix) PB-100ST 330' Outdoor / 660' Indoor Double Modulated Dual Beam, N/O or N/C Relay, 10 to 30 VDC Takex America (Pulnix) PB-100TK 330'/660' Double Modulated Dual Beam 10-30VDC
    The PULNiX "SYNCHRO TWIN" Photoelectric Beam is designed to meet the highest standards of quality and reliability for photoelectric beam intrusion detection. Unique twin beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The systems has a rotary optical system for easy installation and the spacial optical mirror design aids in proper alignment.

    HIGH RELIABILITY
    Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.

    EXTERNAL LIGHT PROTECTION
    Trouble-free condition in 50,000 Ix illumination fluctuation is assured by external light compensation circuit a filter, specially designed, that cuts visible rays effectively. Excellent tolerance against sun light, automobile head light, fluorescent light or mercury light.

    EASY BEAM ALIGNMENT
    The special view finder allows for fast aiming and assures good alignment. Equipped with monitor jack to check sensitivity. Also there is a sensitivity attenuation LED and monitor jack output.

    ROTARY OPTICAL SYSTEM The optical system of both the transmitter and receiver can be rotated a full 180 which allows for side aiming. Therefore the units do not have to be mounted face to face and the beam direction cannot be discerned by simple observation.

    INSECT PROTECTION
    An unique rubber grommet prevents insects from entering through the wiring hole.

    PROTECTION AGAINST FROST/DEW
    As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

    OTHER FEATURES
    * Wide adjustment (horizontally +/-90, vertically +/-10)
    * Tamper output for high security. (Receiver)
    * Polycarbonate cover excellent as anti-shock
    * Automatic Gain Application

    Specifications
  • Detection System Twin, Active Infrared Beam
  • Wavelength 940nm
  • Modulation Double Pulse Modulation
  • Protection Distance Outdoors 100m (330ft.)
  • Protection Distance Indoors 200m (660ft.)
  • Signal Arrival Distance 1000m(3300ft.)
  • Response Time 50-700msec.Adjustable
  • Frequency Selection Not Applicable
  • Alarm Output Dry Relay Contact
  • Form C, N/O-C- N/C
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 0.5A Max.
  • Environmental Output Not Applicable
  • Tamper Output Micro-switch Dry Contact
  • Form B, N/C
  • Contact Rating2 30VDC 0.1A
  • Alarm Led Red On at Alarm
  • Sensitivity Attenuation Led Red On when beam reception is attenuated
  • Alarm Memory Led Red Not Applicable
  • Lens Adjustment Vertical: 10 / Horizontal: 90
  • Supply Power 10 to 30VDC ( non polarity)
  • Current Consumption 80mA Max.
  • Ambient Temperature -31F to + 151F (-35C to + 66C)
  • Installation: Wall or Post mounting
  • Wiring: Terminals
  • Weight Transmitter: 1200g (42oz)
  • Receiver: 1200g (42oz)
  • External Appearance Body: PC Resin (wine red)
  • PB-100TK 330ft/660ft Dbl. Mod. Twin Beam, NO/NC, 10-30VDC
    Takex America (Pulnix) PB-10NSE  Mini Electric Single-Beam 33ft, Form A or B Contact Takex America (Pulnix) PB-10TNSE  Mini Electric Twin-Beam 33ft, Form A or B Contact
    Miniature photoelectric beam sensor is suitable for use inconspicuously in a wide range of applications.

  • Detection System Single Active Infrared Beam
  • Wavelength 940nm
  • Modulation Modulation: 500Hz
  • Protection Distance Outdoors 10m (33ft.)
  • Protection Distance Indoors 10m (33ft.)
  • Response Time 100msec.
  • Frequency Selection Not Applicable
  • Alarm Output Dry Relay Contact
  • N/O, N/C Switch Selectable
  • Flush Mount
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 0.3A Max
  • Miniature photoelectric beam sensor is suitable for use inconspicuously in a wide range of applications.

  • Detection System Twin Active Infrared Beam
  • Wavelength 940nm
  • Modulation Modulation: 500Hz
  • Protection Distance Outdoors 10m (33ft.)
  • Protection Distance Indoors 10m (33ft.)
  • Response Time 100msec.
  • Frequency Selection Not Applicable
  • Alarm Output Dry Relay Contact
  • N/O, N/C Switch Selectable
  • Flush Mount
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 0.3A Max
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please