You are here: Home > Shop Brands > HID Global Corporation > Prox Readers
We found 39 results matching your criteria.
Operating Frequency: 125 kHz Format Size: Up to 84 bits Read Range: Up to 24 (60cm) depending on local installation conditions and card reader selection.
Sort By:
Page of 4
HID 5365EBP00 MiniProx Proximity Reader with Wiegand Output, Classic Beige HID Corp 5385AGS00 MultiProx Reader Side Connect
B = Classic Beige, P = Pigtail (18 inches/45.7 cm), 00 = Beep on, LED normally red, reader flashes green on tag read

MiniProx Proximity Reader with Wiegand output

MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0 x 1.7 x 1.0 (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5 x 2.375 x 3.465 (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18 (45 cm) wire pigtail standard; consult factory for 9 (2.7 m) pigtail available by special order.
    		• The MultiProx reader reads the HID or Schlage proximity card. The reader is a direct replacement for the Schlage 2700 or 2800 series sensor. Exterior or interior proximity reader with a read range up to 3" (7.62cm). Dimensions: 7.5" H x 7.5" W x .8" D (19cm H x 19cm W x 2cm D). Power: 50mA at 24VDC powered by the controller.

    781410348189

    HID Hazardous Location MiniProx 125 kHz Mullion Mount Proximity Card Reader - 5365EGH01 - Classic Charcoal Gray Hazardous back box HID Hazardous Location MiniProx 125 kHz Mullion Mount Proximity Card Reader - 5365EGH04 - Classic Charcoal Gray Hazardous back box
    G = Classic Charcoal Gray, H = Hazardous back box, 01 = Beep off, LED normally red, reader flashes green on tag read

    The hazardous back box option MiniProx is available in gray Terminal Strip only.

    Hazardous Location MiniProx 125 kHz Mullion Mount Proximity Card Reader

    The hazardous Location MiniProx provides the same features and dimensions as the MiniProx reader, with an incorporated junction box rated for use in hazardous locations.

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    		• G = Classic Charcoal Gray, H = Hazardous back box, 04 = Beep on, LED normally red, host must flash green

    The hazardous back box option MiniProx is available in gray Terminal Strip only.

    Hazardous Location MiniProx 125 kHz Mullion Mount Proximity Card Reader

    The hazardous Location MiniProx provides the same features and dimensions as the MiniProx reader, with an incorporated junction box rated for use in hazardous locations.

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    • Northern Computer HU-5395CK100 (Formerly PR-THIN) HID ThinLine II Switch Plate Reader, Black HID MiniProx Proximity Reader with Wiegand output - 5365E1P00 - Designer Black
    Exterior or interior proximity reader with up to a 5" (12.5cm) read range. Dimensions: 4.7" H x 3" W x .5" D (11.93cm H x 7.62cm W x 1.27cm D). 1 = Designer Black, P = Pigtail (18 inches/45.7 cm), 00 = Beep on, LED normally red, reader flashes green on tag read

    MiniProx Proximity Reader with Wiegand output

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    • HID MiniProx Proximity Reader with Wiegand output - 5365E1P04 - Designer Black HID MiniProx Proximity Reader with Wiegand output - 5365E1T00 - Designer Black
    1 = Designer Black, P = Pigtail (18 inches/45.7 cm), 04 = Beep on, LED normally red, host must flash green

    MiniProx Proximity Reader with Wiegand output

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    		• 1 = Designer Black, T = Terminal Strip, 00 = Beep on, LED normally red, reader flashes green on tag read

    MiniProx Proximity Reader with Wiegand output

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    • HID MiniProx Proximity Reader with Wiegand output - 5365E2P00 - Classic Charcoal Gray HID MiniProx Proximity Reader with Wiegand output - 5365E2P00 - Designer Charcoal Gray
    REPLACES HU-5365CGP00 & NC-PRMINIPRO

    G = Classic Charcoal Gray, P = Pigtail (18 inches/45.7 cm), 00 = Beep on, LED normally red, reader flashes green on tag read

    MiniProx Proximity Reader with Wiegand output

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    		• 2 = Designer Charcoal Gray, P = Pigtail (18 inches/45.7 cm), 00 = Beep on, LED normally red, reader flashes green on tag read

    MiniProx Proximity Reader with Wiegand output

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    • HID MiniProx Proximity Reader with Wiegand output - 5365E2P04 - Designer Charcoal Gray HID Prox80 5405 125kHz Europe & Asia Back Box Sized Proximity Card Reader - 5405AGL00
    2 = Designer Charcoal Gray, P = Pigtail (18 inches/45.7 cm), 04 = Beep on, LED normally red, host must flash green

    MiniProx Proximity Reader with Wiegand output

    MiniProx 125 kHz Mullion Mount Proximity Reader

  • Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
  • Power requirements: 5 -16 VDC.
  • Current requirements 20mA avg / 110mA peak at 12VDC.
  • Dimensions: 6.0” x 1.7” x 1.0” (15.2 x 4.3 x 1.91 cm).
  • Dimensions of junction box on Hazardous Location MiniProx: 8.5” x 2.375” x 3.465” (21.59 x 6.03 x 8.8 cm).
  • Classic Series covers available in black, gray, white or beige.
  • Designer Series covers available in black or gray.
  • Base part numbers: 5365 (Wiegand), 5368 (Clock-and-Data). 18” (45 cm) wire pigtail standard; consult factory for 9’ (2.7 m) pigtail available by special order.
    		• Prox80 5405 125kHz Europe & Asia Back Box Sized Proximity Card Reader

    Prox80 Proximity Reader with Wiegand output G = Gray, L = Long Pigtail (9 feet/3 meters), 00 = Beep on, LED normally red, reader flashes green on tag read

    HID's Prox80 reader is an 80 mm (3.15") square reader designed to mount directly to European and Asian size single-gang electrical back boxes. With a three-piece, weatherproof potted enclosure and long pigtail (2.7 m / 9 ft) design, the Prox80 is easily installed and provides up to 14 cm (5.5") of read range.

  • Unique mounting plate accommodates vertical and horizontal mounting hole patterns (60 mm) and Asian (52 mm) hole spacing. The long pigtail (2.7 m or 9 ft) simplifies installation by providing easy cable terminations, and increases reliability by reducing the number of cable joins.
  • Multilingual installation manual supports field personnel in the proper installation of the reader.
  • Available in a grey or white Classic Series cover design with a Wiegand or Clock-and-Data interface.
  • Provides high reliability, consistent read range and low power consumption.
  • Features include multicolor LED and internal control or host control of the LED and beeper.
  • Mounts directly on metal with minimal impact on the read range performance.
  • Can be used with all HID proximity cards and all bit formats.
    •