You are here: Home > Shop Brands > AirVac Central Vacuum Systems
We found 13 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

AirVac Central Vacuum Systems

  Power Units
  WALL INLET VALVE ROUGH-IN KITS
AirVac Central Vacuum Systems previously manufactured by M&S Systems are now manufactured by Linear LLC. M&S Systems has been an industry leader in the design and manufacture of built-in, electronic home amenities for over 50 years.
Power Units
WALL INLET VALVE ROUGH-IN KITS
Sort By:
Page of 2
AirVac AVP24000: Platinum Series Disposable Bag AirVac Central Vacuum AirVac AVP3000: Platinum Series Disposable Bag AirVac Central Vacuum
AVP-24000: Platinum Series Disposable Bag Central Vacuum

The Model AVP24000 Platinum Series Disposable Bag Central Vacuum System is a 240-volt disposable bag central vacuum power unit. The AVP24000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

The AVP24000 has 627 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button.

The power unit's permanent fabric filter provides filtration down to .1 micron diameter.The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside.

The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

Features

  • 240-volt operation
  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Four-color segmented display shows bag debris level
  • Two-color status indicator shows power and motor life
  • Slide-gate collar bag designed for cleaner replacement
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • AVP3000: Platinum Series Disposable Bag Central Vacuum

    The Model AVP3000 Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. The AVP3000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

    The AVP3000 has 537 peak air watt capacity and can be installed in homes up to 3,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button.

    The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside.

    The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

    A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

    Features

  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Four-color segmented display shows bag debris level
  • Two-color status indicator shows power and motor life
  • Slide-gate collar bag designed for cleaner replacement
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • AirVac AVP7500: Platinum Series Disposable Bag AirVac Central Vacuum AirVac AVR12000: Red Series Bagless AirVac Central Vacuum
    AVP-7500: Platinum Series Disposable Bag Central Vacuum

    The Model AVP7500 Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. The AVP7500 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

    The AVP7500 has 551 peak air watt capacity and can be installed in homes up to 7,500 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button.

    The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside.

    The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

    A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

    Features

  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Four-color segmented display shows bag debris level
  • Two-color status indicator shows power and motor life
  • Slide-gate collar bag designed for cleaner replacement
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • AVR-12000: Red Series Bagless Central Vacuum

    The Model AVR12000 Red Series Bagless Central Vacuum System is a bagless central vacuum power unit. The AVR12000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

    The AVR12000 has 570 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch and power indicator.

    The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to remove the debris bucket for emptying.

    The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

    A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

    Features

  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Power indicator
  • Bagless design with debris bucket, no bag to replace
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • AirVac AVR24000: Red Series Bagless AirVac Central Vacuum AirVac AVR3000: Red Series Bagless AirVac Central Vacuum
    AVR-24000: Red Series Bagless Central Vacuum

    The Model AVR24000 Red Series Bagless Central Vacuum System is a 240-volt bagless central vacuum power unit. The AVR24000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

    The AVR24000 has 627 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch and power indicator.

    The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to remove the debris bucket for emptying.

    The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

    A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

    Features

  • 240-volt operation
  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Power indicator
  • Bagless design with debris bucket, no bag to replace
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • REPLACES MU-AV195,MU-AV395, MU-AV425 AND MU-AV2500

    AVR-3000: Red Series Bagless Central Vacuum

    The Model AVR3000 Red Series Bagless Central Vacuum System is a bagless central vacuum power unit. The AVR3000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

    The AVR3000 has 537 peak air watt capacity and can be installed in homes up to 3,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch and power indicator.

    The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to remove the debris bucket for emptying.

    The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

    A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

    Features

  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Power indicator
  • Bagless design with debris bucket, no bag to replace
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • AirVac AVR7500: Red Series Bagless AirVac Central Vacuum M&S by Linear AVP12000: AirVac Platinum Series Disposable Bag AirVac Central Vacuum
    AVR7500: Red Series Bagless Central Vacuum

    The Model AVR7500 Red Series Bagless Central Vacuum System is a bagless central vacuum power unit. The AVR7500 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

    The AVR7500 has 551 peak air watt capacity and can be installed in homes up to 7,500 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch and power indicator.

    The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to remove the debris bucket for emptying.

    The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

    A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

    Features

  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Power indicator
  • Bagless design with debris bucket, no bag to replace
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • AVP-12000: Platinum Series Disposable Bag Central Vacuum

    The Model AVP12000 Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. The AVP12000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.

    The AVP12000 has 570 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuumís control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button.

    The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside.

    The central vacuum systemís power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valveís sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring thatís connected to a low-voltage control switch in the hoseís handle, allowing the operator to control the vacuum unitís power.

    A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuumís exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

    Features

  • High-efficiency, two-stage filtration for superior cleaning
  • High air watt rating while maintaining low operating noise
  • Four-color segmented display shows bag debris level
  • Two-color status indicator shows power and motor life
  • Slide-gate collar bag designed for cleaner replacement
  • Power unit exhausts outside the living area so dust and dirt do not recirculate
  • Hose can plug directly into vacuum at utility port for local cleaning
  • M&S by Linear AVP12000K Vacuum With Garage Car Tool Kit AirVac VM3VK: Three-wall Inlet Valve Kit (White)
    M&S by Linear AVP12000K Vacuum With Garage Car Tool Kit VM3VK: Three-wall Inlet Valve Kit (White)

    The Model VM3VK Three-wall Inlet Valve Kit (White) is a selection of common central vacuum fittings, couplings, wire, wall inlet valves, and wall inlet brackets necessary for a typical three-valve central vacuum system installation. The three wall inlet valves are white color.

    The VM3VK kit includes:

  • 60-feet of low-voltage control wire
  • (15) VM450-500 Quick Clips
  • (9) VM103-75 90-degree Sweep Fittings
  • (2) VM106-55 90-degree Single-sweep 3-way "T" Fittings
  • (6) VM147-300 Pipe Straps with Wire Traps
  • (6) VM112-80 45-degree Short Elbow Fittings
  • (6) VM102-175 Straight Coupling Fittings
  • (3) VM104-90 90-degree Short Elbow Fittings
  • (3) Plastic Wall Inlet Valve Brackets
  • (3) VM195 Wall Inlet Valves (White) Features
  • Kit contains common central vacuum fittings and valves
  • White color wall inlet valves
  • Includes most components needed for a typical three-valve installation
  • Includes wire and wire clips
  • PVC pipe not included
  • AirVac VM612: High-voltage Wall Inlet Valve Rough-in Kit AirVac VMVP3K: Three-wall High-voltage Inlet Valve Kit (White)
    VM612: High-voltage Wall Inlet Valve Rough-in Kit

    The Model VM612 High-voltage Wall Inlet Valve Rough-in Kit contains a plastic valve bracket with a metal mounting flange, high-voltage wire with connector, and a Model VM196-75 Valve Bracket Plaster Guard. The kit is designed for use in new construction. The bracket mounts to a wall stud. The central vacuum systemís PVC riser pipe connects to the back side of the bracket. A high-voltage wall inlet valve slides into the front side of the bracket and is secured to the bracket with two screws.

    Included is a 12-gauge, 6-foot, high-voltage cable with a wall inlet valve electrical connector. This cable wires to a 120 VAC source and supplies power to electric-driven central vacuum power heads. The connector snaps into the wall inlet valveís wall plate. The Model V610PS Deluxe SuperSystem Central Vacuum Hose plugs into the electrical connector when the hose is inserted into the wall inlet valve.

    The VM612 High-voltage Wall Inlet Valve Rough-in Kit is compatible with all colors of Model VMVP High-voltage Wall Inlet Valves, and Model VMVPL Lighted High-voltage Wall Inlet Valves.

    Features

  • Designed for new construction installations
  • Valve bracket is supported by wall stud
  • Wall inlet valve attaches to the valve bracket with two screws
  • Designed for high-voltage wall inlet valves
  • VMVP3K: Three-wall High-voltage Inlet Valve Kit (White)

    The VMVP3K Three-wall High-voltage Inlet Valve Kit (White) is a selection of common central vacuum fittings, couplings, wire, wall inlet valves, and wall inlet brackets necessary for a typical high-voltage three-valve central vacuum system installation. The three wall inlet valves are white color, an almond color kit is also available (VMVP3KA).

    The VMVP3K kit includes:

  • 60-feet of low-voltage control wire
  • (15) VM450-500 Quick Clips
  • (9) VM103-75 90-degree Sweep Fittings
  • (2) VM106-55 90-degree Single-sweep 3-way "T" Fittings
  • (6) VM147-300 Pipe Straps with Wire Traps
  • (6) VM112-80 45-degree Short Elbow Fittings
  • (6) VM102-175 Straight Coupling Fittings
  • (3) VM104-90 90-degree Short Elbow Fittings
  • (3) VM612 High-voltage Wall Inlet Rough-in Kits
  • (3) VMVP High-voltage Wall Inlet Valves (White) Features
  • Kit contains common central vacuum fittings and valves
  • White color wall inlet valves
  • Includes most components needed for a typical high-voltage three-valve installation
  • Includes wire and wire clips
  • PVC pipe not included
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please