You are here: Home > Shop Brands > Talk-A-Phone > Area of Rescue Systems
We found 10 results matching your criteria.
Area of Rescue Systems
Sort By:
Page of 1
Talk A Phone CU-16 Area of Rescue Command Unit Talk A Phone CU-8 Area of Rescue Command Unit
CU16 Description

This fully Integrated Command Unit accomodates up to 16 ADA-compliant Area of Rescue Stations. The unit's Strobe/Sounder indicates an incoming call, and LED's indicate the calling location.

CU-16 Area of Rescue Command Unit Features

  • Accomodates up to 16 ADA compliant Area of Rescue Stations
  • Stations are powered by Command Unit
  • LEDs on Command Unit indicate calling Station and line status
  • Blinking LEDs indicate Stations that are waiting to be answered
  • On-site calling requires no outside phone lines
  • Off-site calling requires only two phone line for up to 16 Stations: line seizure eliminates need for dedicated phone lines
  • Siren is activated when Emergency call is first detected, shuts off when call has been answered
  • Strobe is activated when Emergency call is first detected and remains active for duration of call
  • Included UPS provides 4 hour power back-up in case of power failure
  • Includes built-in two-line phone

    Specifications

  • Sound: Sounder ranges from 90 to 100 dBA, has 8 sound options
  • Construction: 16 gauge (1.3mm) #4 brushed stainless steel cabinet, acrylic windows
  • Dimensions: 24.25(616) W x 23.88(606) H x 4(102) D in(mm)
  • Weight: 75 pounds (34kg)
  • Mounting: Surface mounts, strobe/sounder mounts to standard 4" square box
  • Communication: Lighted 2-line phone with 12-key pad receives and selectively originates calls
  • Power Source: Stations receive power from Command Unit, powered by UPS. UPS requires 120 VAC.
  • Wiring: 1 twisted, shielded pair per station not to exceed 25 ohms resistance
  • Lighting: Strobe is rated at 15 candela, flashes once per second
  • Environment: Command unit is for indoor use, outdoor Area of Rescue Stations are available

    Area of Rescue Stations

  • Surface Mount Station: Model ETP-100MB is an indoor surface mount Area of Rescue Station
  • Flush Mount Station: Model ETP-100EB is an indoor flush mount Area of Rescue Station
  • Outdoor Station: Use models ETP-400 and ETP-SM for an outdoor Area of Rescue Station

    Options and Accessories

  • Polycarbonate Sign: Model ETP-SIGN is a polycarbonate Area of Rescue Sign
  • Lighted Sign: Model ETP-SIGN/L is a lighted Area of Rescue Sign
  • Deluxe Lighted Sign: Model ETP-SIGN/LD is a lighted Area of Rescue sign with battery backup
  • Mounting Sleeve: Model MS-100 is a flush mounting sleeve (rough-in box) for ETP-100EB
  • CU8 Description

    This fully Integrated Command Unit accomodates up to 8 ADA-compliant Area of Rescue Stations. The unit's Strobe/Sounder indicates an incoming call, and LED's indicate the calling location.

    CU-8 Area of Rescue Command Unit Features

  • On-site calling requires no outside phone lines
  • Off-site calling requires only one phone line for up to 8 Stations: line seizure eliminates need for dedicated phone line
  • Siren is activated when Emergency call is first detected, shuts off when call has been answered
  • Strobe is activated when Emergency call is first detected and remains active for duration of call
  • Built-in UPS provides 4 hour power back-up in case of power failure
  • Includes built-in phone
  • Accomodates up to 8 ADA compliant Area of Rescue Stations
  • Stations are powered by Command Uni
  • LEDs on Command Unit indicate calling Station and line status
  • Blinking LEDs indicate Stations that are waiting to be answered

    Specifications

  • Environment: Command unit is for indoor use, outdoor stations are available
  • Sound: Sounder ranges from 90 to 100 dBA, has 8 sound options
  • Construction: 16 gauge #4 brushed stainless steel cabinet, acrylic windows
  • Dimensions: 24 -3/8"W x 18-3/8"H x 4-1/4"D
  • Weight: 59 pounds
  • Mounting: Surface or Recess mountable, strobe/sounder mounts to standard 4" square box
  • Communication: Lighted red phone with 12-key pad receives and selectively originates calls
  • Power Source: Stations receive power from Command Unit, powered by UPS. UPS requires 120 VAC.
  • Wiring: 1 twisted, shielded pair per station not to exceed 25 ohms resistance
  • Lighting: Strobe is rated at 15 candela, flashes once per second
  • Talk A Phone CU-8R Recess Mounted Area of Rescue Command Unit Talk A Phone ETP-100EB Emergency Phone
    CU8R Description

    This fully Integrated Command Unit accomodates up to 8 ADA-compliant Area of Rescue Stations. The unit's Strobe/Sounder indicates an incoming call, and LED's indicate the calling location.

    CU-8R Recess Mounted Area of Rescue Command Unit Features

  • Includes built-in phone
  • Accomodates up to 8 ADA compliant Area of Rescue Stations
  • Stations are powered by Command Unit
  • LEDs on Command Unit indicate calling Station and line status
  • Blinking LEDs indicate Stations that are waiting to be answered
  • On-site calling requires no outside phone lines
  • Off-site calling requires only one phone line for up to 8 Stations: line seizure eliminates need for dedicated phone line
  • Siren is activated when Emergency call is first detected, shuts off when call has been answered
  • Strobe is activated when Emergency call is first detected and remains active for duration of call
  • Built-in UPS provides 4 hour power back-up in case of power failure

    Specifications

  • Sound: Sounder ranges from 90 to 100 dBA, has 8 sound options
  • Construction: 16 gauge #4 brushed stainless steel cabinet, acrylic windows
  • Dimensions: Wall Opening: 14.5" W x 29.12" H x 3.25" D
  • Front Panel: 0.75" D, 1.00" Rim with 0.25" radius corners
  • Weight: 59 pounds
  • Mounting: Recess mounts, strobe/sounder mounts to standard 4" square box. For surface mount
  • Communication: Lighted phone with 12-key pad receives and selectively originates calls
  • Power Source: Stations receive power from Command Unit, powered by UPS. UPS requires 120 VAC.
  • Wiring: 1 twisted, shielded pair per station not to exceed 25 ohms resistance
  • Lighting: Strobe is rated at 15 candela, flashes once per second
  • Environment: Command unit is for indoor use, outdoor stations are available

    Options and Accessories

  • Polycarbonate Sign: Model ETP-SIGN is a polycarbonate Area of Rescue sign
  • Lighted Sign: Model ETP-SIGN/L is a lighted Area of Rescue sign
  • Deluxe Lighted Sign: Model ETP-SIGN/LD is a lighted Area of Rescue sign with battery backup
  • Mounting Sleeve: Model MS-100 is a flush mounting sleeve (rough-in box) for ETP-100EB
  • ETP-100EB Description

    The ETP-100EB is an indoor, ADA-compliant hands-free Emergency Phone for use in locations such as: elevators, areas of rescue, stairwells, indoor controlled-access areas, senior citizen housing and correctional facilities.

    ETP-100EB Emergency Phone Features

  • Auto-answer allows security to monitor and initiate calls with Emergency Phone
  • Vandal-resistant stainless steel faceplate & metal button
  • Uses regular phone lines or PBX
  • Phone line-powered: no power supply or battery back-up required
  • Push button once to call, then speak hands-free
  • Options available that offer the ability to automatically identify attendant of location of calling phone by recorded message and digital display
  • LED indicator for hearing impaired
  • Cast metal raised letter and Braille signage for ADA compliance
  • Built-in autodialer can call two numbers. If first number doesn't answer or is busy, dials second number

    Specifications

  • Phone Line: Requires POTS line, analog PBX extention, or connection to one of our consolidators. For consolidator information, see Talk-A-Phone models EC-2 or EC-8.
  • Construction: 12 gauge #4 brushed stainless steel face plate
  • Dimensions: Front panel: 9-1/4"W x 11"H
  • Wall opening: 4-1/2"W x 7-1/2"H x 2-1/2"D
  • Weight: 6 lbs.
  • Mounting: Flush mounts (Model MS-100 backbox available)
  • Communication: 2-way hands-free communication
  • Power Source: Phone line powered (requires 20mA at 24V off-hook)
  • Programming: Non-volatile EEPROM programming can be done from any telephone. No battery back-up is needed
  • "On" Time: Programmable from 1-4270 minutes
  • Wiring: 1 twisted-shielded pair (gauge depends on distance)
  • Connection: Parallel tip and ring connected to RJ11 connector for quick installation
  • Circuit Protection: Varistor lightening suppressed and full wave polarity guarded
  • Dialing Speed: Approximately 10 tones per second
  • Digit Capacity: Up to 18 digits, including pauses, for each of two phone numbers

    Options and Accessories

  • Radio Frequency: RF systems available for 1-200 Emergency Phones
  • Voice identification: V-option (Model ETP-100EBV) allows recording of a location identifying message
  • Auxiliary inputs/outputs: AUX-option (Model ETP-100EB AUX or ETP-100EBV AUX) allows easy integration with CCTV, Blue/Light Strobe, Scream Alert and other devices
  • Scream-Alert: Model SA-1 activates Emergency Phone when loud screams are detected
  • Cellular: Model ETP-CI allows use of any cellular provider for wireless phone connection
  • Fiber Optics: Fiber Optic interface available
  • 8-Phone Consolidator: Model EC-8 allows connection of up to 8 phones onto one phone line, while retaining ability to call each phone individually
  • PC-based Diagnostics: Model ETP-TAL is a Windows-based package that automatically polls each unit up to once per minute, getting a verification report back from each Phone
  • Talk A Phone ETP-100MB Emergency Phone Talk A Phone ETP-SIGN is a polycarbonate Area of Rescue sign
    ETP-100MB Description

    The ETP-100MB is an indoor, ADA-compliant hands-free Emergency Phone for use in locations such as: elevators, areas of rescue, stairwells, indoor controlled-access areas, senior citizen housing and correctional facilities.

    ETP-100MB Emergency Phone Features

  • Vandal-resistant stainless steel faceplate & metal button
  • Uses regular phone lines or PBX
  • Phone line-powered: no power supply or battery back-up required
  • Push button once to call, then speak hands-free
  • Options available that offer the ability to automatically identify attendant of location of calling phone by recorded message and digital display
  • LED indicator for hearing impaired
  • Cast metal raised letter and Braille signage for ADA compliance
  • Built-in autodialer can call two numbers. If first number doesn't answer or is busy, dials second number
  • Auto-answer allows security to monitor and initiate calls with Emergency Phone

    Specifications

  • Programming: Non-volatile EEPROM programming can be done from any telephone. No battery back-up is needed
  • "On Time": Programmable from 1-4270 minutes in 1 minute increments
  • Wiring: 1 twisted-shielded pair (gauge depends on distance)
  • Phone Line: Requires POTS line, analog PBX extention, or connection to one of our consolidators. For consolidator information, see Talk-A-Phone models EC-2 or EC-8.
  • Construction: 12 gauge #4 brushed stainless steel face plate
  • Dimensions: 4-13/16" W x 8-13/16" H x 2-1/2" D
  • Weight: 6 lbs.
  • Mounting: Surface mounts
  • Digit Capacity: Up to 18 digits, including pauses, for each of two phone numbers on top button
  • Dialing Speed: Approximately 10 tones per second
  • Circuit Protection: Varistor lightening suppressed and full wave polarity guarded
  • Communication: 2-way hands-free communication
  • Power Source: Phone line powered (requires 20mA at 24V off-hook)

    Options and Accessories

  • Scream-Alert: Model SA-1 activates Emergency Phone when loud screams are detected
  • 8-Phone Consolidator: Model EC-8 allows connection of up to 8 phones onto one phone line, while retaining ability to call each phone individually
  • PC-based Diagnostics: Model ETP-TAL is a Windows-based package that automatically polls each unit up to once per minute, getting a verification report back from each Phone
  • Radio Frequency: RF systems available for 1-200 Emergency Phones
  • Cellular: Model ETP-CI allows use of any cellular provider for wireless phone connection
  • Fiber Optics: Fiber Optic interface available
  • Voice identification: V-option (Model ETP-100MBV) allows recording of a location identifying message
  • Auxiliary inputs/outputs: AUX-option (Model ETP-100MB AUX or ETP-100MBV AUX) allows easy integration with CCTV, Blue/Light Strobe, Scream Alert and other devices
  • ETPSIGN Description

    Self-adhesive sign designates a location as an ADA Area of Rescue Assistance and aids in locating Emergency Phone

    ETP-SIGN Area of Rescue Sign Features

  • Raised lettering and Braille for ADA-compliance
  • Constructed of ultra-violet light-resistant polycarbonate
  • Self-adhesive to mount easily on wall

    Specifications

  • Construction: Ultra-violet light-resistant polycarbonate
  • Dimensions: 6"W x 8"H
  • Mounting: Self-adhesive
  • Talk A Phone ETP-SIGN/L Lighted Area of Rescue Sign Talk A Phone ETP-SIGN/LD is a lighted Area of Rescue sign with battery backup
    ETPSIGNL Description

    Steel, back-lit sign designates a location as an ADA Area of Rescue Assistance and aids in locating Emergency Phone

    ETP-SIGN/L Lighted Area of Rescue Sign Features

  • Attractive, attention-getting sign
  • Aids with ADA compliance
  • Frame is constructed of steel

    Specifications

  • Dimensions: 12.25"W x 8.13"H x 3.75"D
  • Mounting: Mounts to wall or hangs from ceiling
  • Power: Requires 120VAC or 277VAC
  • ETPSIGNLD Description

    Lighted Lexan sign with battery back-up designates a location as an ADA Area of Rescue Assistance and aids in locating Emergency Phone

    ETP-SIGN/LD Deluxe Lighted Area of Rescue Sign Features

  • Battery back-up in case of power failure
  • Attractive, attention-getting sign
  • Aids with ADA compliance

    Specifications

  • Dimensions: 14"W x 10.63"H x 3"D (base) 0.1" (Lexan)
  • Mounting: Mounts to wall or hangs from ceiling
  • Power: Requires 120VAC or 277VAC
  • Talk A Phone MS-100 Mounting Sleeve Talk-A-Phone ETP-100EBV AUX ADA Compliant, Hands-Free Indoor Emergency Phone with Voice and Auxiliary inputs/outputs - ETP100EBVAUX
    MS100 Description

    The MS-100 is a mounting sleeve box for flush mounting 100 Series Talk-A-Phone Emergency Phones.

    MS-100 Mounting Sleeve Features

  • Allows for easy mounting of Emergency Phone
  • Conduit entry from bottom or back
  • Extra space included for modular RJ11 jack

    Specifications

  • Construction: Cold Rolled Steel
  • Dimensions: 9"W x 11.25"H x 3"D
  • Weight: 3.63 lbs.
  • Conduit size: 7/8" conduit hole on back and on bottom for 1/2" conduit. 1 1/8" conduit punch-out on back for 3/4" conduit.
  • ADA Mounting Height: Maximum 51" above finished floor for forward reach, 57" for side reach.
  • The ETP-100EB is an indoor, ADA-compliant hands-free Emergency Phone for use in locations such as: elevators, areas of rescue, stairwells, indoor controlled-access areas, senior citizen housing and correctional facilities.
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please