You are here: Home > Shop Brands > Corby Industries > Accessories
We found 103 results matching your criteria.
A wide range of accessories for use with Corby Systems.
Sort By:
Page of 9
Corby 6566 - Programmable Digital Keypad - Cast metal,Heavy-duty, Outdoor Corby 7520 - Platinum Series Keypad - Mullion-Style,Slim

Programmable Digital Keypad - Cast metal,Heavy-duty, Outdoor

This is a "stand-alone" access control system designed for low cost and easy installation using a minimal amount of additional components. All you need for minimal operation is a simple 12 or 24 VDC power supply and an electric door lock. All necessary relays and other security features are built into its thin profile, allowing most models to be installed into a standard electrical box.

This 6500 Series replaces our 6000 Series. It is exactly the same as the 6000 except the printer option has been removed and replaced with 165 user codes, a security lockout feature and increased voltage range to 24 VDC. This keypad is ideal for storage rooms, garage door, utility rooms, vehicle alarms, activating a security camera, arming, disarming or shunting a security system and other security applications. A tamper switch should be used or a fused line should be activated when the unit is removed from the mounting area.

  • EEPROM Memory
  • 165 User Codes
  • Security Lockout
  • Duress Codes
  • Auxiliary Codes
  • Forced Entry Input
  • 3-6 Code Length
  • Door Ajar
  • Time Cancel
  • 12-24 VDC Operation
  • RTE Input
  • Audible Key Beep
  • Panic Code
  • Cast metal
  • Heavy-duty
  • Outdoor
  • Flush mount
  • Green and Red LED
  • 3.23" X 5.0"
  • Platinum Series Keypad - Mullion-Style,Slim

    The Platinum Series Keypad is made from a solid block of aluminum, this keypad utilizes piezoelectric technology to provide the security installer with the elegance your customer wants and the ruggedness that your customer needs! It is resistant to the effects of Mother Nature and vandals.

    The keypad is a stand-alone unit, requiring only a power supply and electric door lock to operate. Programming is done at the keypad, and it has the capacity to hold over 200 different user codes! Code lengths may be from 4 to 8 digits in length, giving your customer 100 million code combinations! All codes are stored in nonvolatile memory, so if you lose power to the unit, your codes will still be there when power returns.

    To ease the installation, this keypad requires only four (4) wires to install (two for power and two for the lock) and can operate on 12 to 24 Volts DC or 12 Volts AC. For magnetic lock installations, a request-to-exit button can be wired in for fail-safe operation.

    For extra security, the keypad features a lockout option that will disable the keypad for 30 seconds if 3 consecutive invalid codes are entered. It also has a code time-out feature - if a partial code is entered, the keypad will reset after 15 seconds.

    This model is a slim version that is designed to be surface mounted on a door frame and is laid out in a 2 x 6 matrix. It features screwplugs that prevent removal of the unit from the wall.

  • Resistant to Vandals
  • Resistant to Weather
  • Resistant to Water
  • One-Piece
  • Metal Construction
  • No Moving Parts
  • Piezo Switches
  • Anodized Graphic
  • Tamper-Resistant Mounting

    Model includes:
    Mullion-Style
    Slim
    Surface-Mount
    Green LED
    Red LED
  • Corby 7530 - Platinum Series Keypad - Aluminum Cover, Outdoor Corby Industries 1000 - SYSTEM 1 SINGLE DOOR ACCESS CONTROL

    Platinum Series Keypad - Aluminum Cover,Outdoor

    The Platinum Series Keypad is made from a solid block of aluminum, this keypad utilizes piezoelectric technology to provide the security installer with the elegance your customer wants and the ruggedness that your customer needs! It is resistant to the effects of Mother Nature and vandals.

    The keypad is a stand-alone unit, requiring only a power supply and electric door lock to operate. Programming is done at the keypad, and it has the capacity to hold over 200 different user codes! Code lengths may be from 4 to 8 digits in length, giving your customer 100 million code combinations! All codes are stored in nonvolatile memory, so if you lose power to the unit, your codes will still be there when power returns.

    To ease the installation, this keypad requires only four (4) wires to install (two for power and two for the lock) and can operate on 12 to 24 Volts DC or 12 Volts AC. For magnetic lock installations, a request-to-exit button can be wired in for fail-safe operation.

    For extra security, the keypad features a lockout option that will disable the keypad for 30 seconds if 3 consecutive invalid codes are entered. It also has a code time-out feature - if a partial code is entered, the keypad will reset after 15 seconds.

    This model is a slim version that is designed to be flush mounted on a door frame and is laid out in a 2 x 6 matrix.

  • Resistant to Vandals
  • Resistant to Weather
  • Resistant to Water
  • One-Piece
  • Metal Construction
  • No Moving Parts
  • Piezo Switches
  • Anodized Graphic
  • Tamper-Resistant Mounting

    Model includes:
    Aluminum Cover
    Outdoor
    Surface Mount
    Green LED
    Red LED
    Night light
  • System 1 Single-door Access Control System ● 250 users, 50 event buffer, 3 time schedules, forced entry, door ajar, request-to-exit, serial printer output, non-volatile EEPROM ● 1 main relay, 1 aux relay ● Program with built-in keypad & LED display or full duplex RS232 using PC or VDT ● Keypad, bar code, magnetic stripe, 30-bit Weigand, 30-bit prox, data chip ● Requires 48-4301 for data chip ● Includes transformer, mounting hardware, 50' eight conductor wire ● Does not support 26-bit cards ● Cabinet: 9' W x 12" H x 4.5" D (229mm x 305mm x 114mm)
    Corby Industries 1008 - REPLACMENT BOARD FOR SYSTEM 1 Corby Industries 11 - 11 GEM BOX WITH TAMPER SWITCH SPDT

    Corby Industries 1008 - REPLACMENT BOARD FOR SYSTEM 1

    Tamper Box ● Recessed ● Single-gang ● Flush mount for old and new work ● Easy-mount swing tabs ● High impact lightweight PVC w/ knockouts ● Tamper switch w/ SPDT form C contacts & leaf-style adjustable contact arm & 6" (152mm) wires attached ● Use with any single-gang device except our 52-4012 71-6522 72-7022 ● Volume is 14 cubic inches ● 2.25" W x 4.125" L x 2.75" D (57mm x 105mm x 70mm)
    Corby Industries 12 - 12 SURFACE MOUNT BACK BOX Corby Industries 14 - SURFACE MOUNT FOR HEAVY DUTY,METAL KEYPAD
    Tamper Box ● Surface mount ● Front tamper switch w/SPDT form C contacts & leaf-style adjustable contact arm & 6" (152mm) wires attached ● One rear tamper form A hermetically sealed plunger type switch with two wires attached ● Use with any single-gang device ● Box is single-gang, surface mount, die cast aluminum painted gray with one-half inch threaded conduit holes (3) ● Mounting hardware included (gaskets not included) ● Volume is 25 cubic inches ● 2.75" W x 4.5" L x 2" D (70mm x 114mm x 51mm) Mounting Box ● Surface mount ● Heavy duty 0.045" thick welded steel with gray corrosion proof coating ● Form A hermetically sealed, plunger type, front mounted tamper switch with two 6" (152mm) wires attached ● Use with any single-gang device ● Front and rear sealing gaskets and mounting hardware included ● Unit has a 0.875"(22 mm) rear hole for exit wiring ● Volume is 18 cubic inches ● 3.31" W x 5.06" L x 1.1" D (84mm x 129mm x 28mm)
    Corby Industries 2000 - System 2000 Windows Access Control Corby Industries 25 - 25 6-12V RELAY SPOT

    System 2000 Windows Access Control

    Corby's System 2000 controls up to 62 doors and may upgrade to 248. If you need to open one garage door or control an office building, now you can do it.

    The new System 2000 two-door controller is a networked enhanced version of our reliable and field-tested System 2. The System 2000 requires a Network Interface Controller (NIC) and our System 2000 software for Windows. If you already have System 2's installed, they are easily upgraded to System 2000 specifications.

    Users can pass through an entry point secured by a Keypad, Reader, or combination of both by entering a correct code into the Keypad or presenting a valid Card or Data Chip to the reader. The panel then decides if the user is allowed access to this door at the current time and date, either grants or denies access and logs the transaction in the event buffer of the panel and the PCs database.

    A door can be programmed for public access to automatically lock and unlock according to the programmed time schedules set up by the System Administrator. System 2000 has a built-in clock and calendar that automatically adjusts for daylight savings time and leap year. Also, there are hundreds of holidays which allow the System to selectively engage alternate holiday schedules for users and doors.

    Each System panel is equipped with two of the following outputs/inputs: Main Relays, Auxiliary Relays, Voltage Outputs, Door Ajar / Forced Entry Inputs, Request-To-Exit Inputs, Zone Inputs and one Emergency Drop Input.

    Contains the necessary components to install a basic system 2000 package.

    System 2000 NIC
    (Network Controller)
    System 2000 Software
    System 2000 Manual
    Momentary Relay ● Low current 6-12VDC SPDT Form C rated 3 amps @ 120 VAC with 6" (152mm) wires attached ● Only requires 18ma @ 6VDC & 36ma @ 12VDC to activate ● Momentary dry closure for low voltage circuits ● General purpose relay ● Includes factory installed diode for EMP suppression & double-sided tape for easy installation ● 0.88" W x 0.63" L x 0.63" H (22mm x 16mm x 16mm).
    Corby Industries 4006 - PARALLEL FOR USE WITH PC,6099CP1 Corby Industries 4012 - WEATHERPROOF KEYPAD ALUMINIUM
    Printer - Parallel Port ● For use with any PC that has a DB25 parallel port LPT1 connection ● Use with Corby System 10 (26-4450) to generate custom reports ● 80-132 column dot matrix ● High speed 240 cps draft ● 240 X 216 high resolution ● 8 built-in fonts ● Tractor or friction feed ● Rear or bottom feed ● 9-pin impact prints multi-forms ● Black replacement ribbons available (57-4013) ● Ivory ● 5.4" W x 17" L x 12.6" D (136mm x 432mm x 320mm) System Keypad - Outdoor ● Standard-Size Keypad ● Surface mount, aluminum housing w/ spring-loaded cover ● Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) ● Includes 4000 Series control board (see 52-4016 for all function specifications) ● Includes a rear-mount sealing gasket ● Surface mounts easily on optional 95-0012 & 95-0014 tamper-proof back boxes ● 2.8" W x 4.6" L x 0.875" D (71mm x 117mm x 22mm)
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please