You are here: Home > Shop Brands > Keyscan > Peripherals
We found 38 results matching your criteria.
Keyscan offers a range of peripheral devices such as modems, communication devices, and card printers.
Sort By:
Page of 4
Keyscan 402322 - 9 PIN DATA CABLE Keyscan 402324 - MODEM CABLE

Keyscan 402322 - 9 PIN DATA CABLE

Keyscan 402324 - MODEM CABLE

Keyscan CB485 - RS-485 COMMUNICATION BOARD Keyscan CB485M - RS45 MODEM COMMUNICATION
CB-485
• Establishes RS-485 communication between multiple access control units (ACU) and the PC
• Reliable PC to ACU communication
• Enhanced communication speed
• Increases maximum wiring distance on ACU communication loop
• Easily connects to ACU via ribbon cable
• Mounts directly in ACU enclosure
• Uses two twisted pairs on CAT5 cable
Optional CB-485 configuration with NETCOM2P
(Network TCP/IP module)

• NETCOM2P plugs into socket on CB-485
• Delivers multiple ACU communication to PC over a LAN/WAN (TCP/IP)
• Suitable for 10/100 Ethernet/Fast Ethernet applications
• Uses static IP address
CB-485M

• CB-485M expands system capability with built-in dial up modem to link remote sites
• Designed specifically for Keyscan access control units
• Uses standard analog phone line
• Pre-loaded setup parameters
• Mounts directly in ACU enclosure
• Only one CB-485M required for multiple ACUs on same communication loop
Keyscan CPB10 - COMMUNICATION PARALLEL BOARD Keyscan CPB10TB  - COMMUNICATION BOARD WITH TERMINAL BLC

Keyscan CPB10 - COMMUNICATION PARALLEL BOARD

Keyscan CPB10TB - COMMUNICATION BOARD WITH TERMINAL BLC

Keyscan CWIEEX - COAX WIEGAND EXTENDER COAXEX Keyscan IOCB1616 - IO BOARD WITH ENCLOSURE & POWER SUPPLY

For use when replacing COAX wired systems with Keyscan systems.
Allows use of all existing COAX wireup, no need to re-wire.
Designed by Keyscan for compatibility with any Access Control Unit and Readers supporting Wiegand data format.
Built-in door status monitoring, unlock relay and request to input reduces cable and installation costs.
COAX/Wiegand Tx Extender provides inputs for Door status monitoring and Request To Exit (RTE) and an output to control unlock relay.
COAX/Wiegand Rx Extender provides outputs for Door status monitoring and Request To Exit (RTE) and an input from the unlock relay.
Permits use of existing COAX cable up to 500 feet using proprietary communications between Transmitter and Receiver.
Fast, easy, trouble-free installation.

• Has 16 inputs and 16 outputs which can be used for custom applications to connect additional devices

within the access control system

• Inputs can monitor contacts on readerless doors, motion sensors, push buttons, or other

sensing devices

• Outputs can activate CCTV cameras, burglar alarm systems, lights, HVAC, parking lot gates,

or other devices

• Single or multiple inputs can be assigned to trip single or multiple outputs – either open

collector or optional form "C" relays – using any of the 7 different modes that include timers,

delays, or pulsing

• Time zones can be assigned to activate and de-activate inputs or outputs

• Includes an enclosure with ample room to mount various IOCB1616

board configurations for flexible installation and wiring

• The access control unit communicates to the IOCB1616 boards

via RS485 over twisted pair cable


FEATURES AND BENEFITS

 

• IOCB1616 module has 16 inputs and 16 outputs

• Connect up to 4 IOCB1616 modules per access control unit for a total of 64 assignable inputs and 64 assignable outputs

• Input/output assignments are programmed via dedicated interface screens on System V Client software

• Permits "and" & "or" logic statements

• Selectable input settings – non supervised or digital, single end of line supervision, or double end of line supervision

• Add up to 2 optional OCB-8 relay boards for form "C" contact outputs

• IOCB1616 includes (1) standard Keyscan enclosure, (1) IOCB1616 circuit board, and (1) DPS-12 power supply

• Enclosure can accommodate up to two IOCB1616 circuit boards with up to 4 optional OCB-8 relay boards

• Compatible with CA4000 or CA8000 controllers only

• Additional modules (IOCB1616B – board only) are available

 

SPECIFICATIONS

 

Power

Dimensions

IOCB1616 -12 VDC, 100 mA board only,

Enclosure -20 1/4" (51.4 cm) H x 16 3/8"

300 mA lock power limit

(41.6 cm) W x 5 5/8" (14.3 cm) D

DPS12 (AUX) -12VDC Output, 1.2A

IOCB1616 – 10 5/8" (26.9 cm) x 3 9/16" (9.1.cm)

Cable Maximums

Environment

Maximum distance from ACU to last IOCB1616 is 2000 feet

Suitable for commercial and industrial applications

2-wire twisted pair

Relative Humidity: 0% to 90% R.H., non-condensing

 

Operating Temperatures: -20o to 71o C (-4o to 160o F)

 

Storage Temperatures: -20o to 85o C (-4o to 185o F)

 

 

 

 

 

 

Keyscan IOCB1616B - IO BOARD ONLY Keyscan MC33H - 12V MODEM FOR HOST PC REPLACEMENT FOR MC9600H.

• Has 16 inputs and 16 outputs which can be used for custom applications to connect additional devices

within the access control system

• Inputs can monitor contacts on readerless doors, motion sensors, push buttons, or other

sensing devices

• Outputs can activate CCTV cameras, burglar alarm systems, lights, HVAC, parking lot gates,

or other devices

• Single or multiple inputs can be assigned to trip single or multiple outputs – either open

collector or optional form "C" relays – using any of the 7 different modes that include timers,

delays, or pulsing

• Time zones can be assigned to activate and de-activate inputs or outputs

• Includes an enclosure with ample room to mount various IOCB1616

board configurations for flexible installation and wiring

• The access control unit communicates to the IOCB1616 boards

via RS485 over twisted pair cable


FEATURES AND BENEFITS

 

• IOCB1616 module has 16 inputs and 16 outputs

• Connect up to 4 IOCB1616 modules per access control unit for a total of 64 assignable inputs and 64 assignable outputs

• Input/output assignments are programmed via dedicated interface screens on System V Client software

• Permits "and" & "or" logic statements

• Selectable input settings – non supervised or digital, single end of line supervision, or double end of line supervision

• Add up to 2 optional OCB-8 relay boards for form "C" contact outputs

• IOCB1616 includes (1) standard Keyscan enclosure, (1) IOCB1616 circuit board, and (1) DPS-12 power supply

• Enclosure can accommodate up to two IOCB1616 circuit boards with up to 4 optional OCB-8 relay boards

• Compatible with CA4000 or CA8000 controllers only

• Additional modules (IOCB1616B – board only) are available

 

SPECIFICATIONS

 

Power

Dimensions

IOCB1616 -12 VDC, 100 mA board only,

Enclosure -20 1/4" (51.4 cm) H x 16 3/8"

300 mA lock power limit

(41.6 cm) W x 5 5/8" (14.3 cm) D

DPS12 (AUX) -12VDC Output, 1.2A

IOCB1616 – 10 5/8" (26.9 cm) x 3 9/16" (9.1.cm)

Cable Maximums

Environment

Maximum distance from ACU to last IOCB1616 is 2000 feet

Suitable for commercial and industrial applications

2-wire twisted pair

Relative Humidity: 0% to 90% R.H., non-condensing

 

Operating Temperatures: -20o to 71o C (-4o to 160o F)

 

Storage Temperatures: -20o to 85o C (-4o to 185o F)

 

 

 

 

 

 

• Designed by Keyscan specifically for use with KEYSCAN Access Controllers and KEYSCAN

SYSTEM V Software.

• MC33H is supplied with housing and plug-in transformer for simplified installation at a computer

running KEYSCAN SYSTEM V Software.

• MC9600 (Panel Mount) is powered from the ACU’s 12 VDC battery backed up power supply for

faster installations and reliable operation even in power out situations.

• Pre-loaded with standard setup parameters to ensure trouble free connection the first time.

• Additional modem and ACU settings are updated by KEYSCAN SYSTEM V Software.

• Fast, easy, trouble-free installation.

 

FEATURES AND BENEFITS

• Fast easy installation either at the host computer or inside the Keyscan Access Control Unit (ACU).

• Factory default settings virtually guarantee establishing successful communications the first time.

• KEYSCAN SYSTEM V Software updates all the ACU’s with the information they need to operate efficiently whether direct

connect or via modem.

• Automatically adjusts to the appropriate speed for local line conditions.

• Simplifies installations since the modem can be installed at any convenient ACU location.

• Operates with both pulse and tone analogue telephone systems.

• Expands system capacity without affecting direct connected devices.

• Modem can be used to link a remote site to the host computer regardless of whether it is across the street or across the

country.

• Can be used as a fax modem on the KEYSCAN SYSTEM V computer if required.

• Set up strings defaulted in Keyscan System V Software.

 

 

Dimensions: MC9600: 4" x 3" (101mm x 76mm)

MC33H: 4.5" x 3.25" (114mm x 83mm)

Environmental Tolerances:

Suitable for light to moderate residential, commercial and

industrial applications.

Relative Humidity: 0 to 100% non-condensing

Temperature: -35° to 65° C

Certifications:

FCC Part 15, subsection J for a class B device, UL, CSA, CE

 

 
SPECIFICATIONS

System Requirements:

External power supply:

Input power: MC33H: 12 VDC ± 5% (300 mA) via 2.1 mm adapter plug (provided)

MC9600: direct wired from external 12 VDC 1A power supply

Certifications:

FCC Part 15, subsection J for a class B device, FCC Part 68, DOC, UL, CSA, CE.

Relative Humidity: 0 to 100%* Temperature: -35° to 65° C

* Resistant to moisture but not suitable for use underwater.

 

Dimensions: MC9600: 4" x 3" (101mm x 76mm)

MC33H: 4.5" x 3.25" (114mm x 83mm)

 

 
Keyscan MISCOMM2 - EIA/TIA 562 TWO RS232 CONVERT Keyscan MSSCOMMP - RS232 TO TCP/IP CONVERTER FOR PC

MISCOMM2

• for communication between buildings when using a fiber-optic modem, short-haul modem, or asynchronous line driver

Keyscan MSSCOMMP - RS232 TO TCP/IP CONVERTER FOR PC

   
 
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please