2008 8 Relay Card Expander Cabinet

2008E Elevator Restriction Relay Cabinet

The 2008E Elevator Restriction Unit allows the visitor limited access into a building. The 2008E Elevator Restriction Unit comes complete with a cabinet, the Main Elevator Restriction Controller Board, the Elevator BackPlane and one PS-24/PS-24P transformer. The 2008E supports up to eight 2012E Elevator Restriction Relay Cards for a total of 96 elevator restriction relays. The 2008E Elevator Restriction Unit provides time dependent relay contacts which can be used for either elevator control or video control.

2008M Master NSL Relay Cabinet

The 2008M Master NSL Relay Cabinet comes complete with one Main NSL Controller Board, one NSL Backplane and one PS-24/PS-24P transformer. Up to eight 2012 NSL Telephone Line Relay Cards may be installed on the NSL backplane, allowing for a total of 96 Residents per 2008M enclosure. The 2008M NSL Unit (and any 2008/16 NSL Relay Backplane Expanders) performs the switching between the telephone lines, resident lines and the 2001 Lobby Unit(s). In addition it generates call waiting tones to the resident. The 2008M and any 2008’s and/or 2016’s must all be adjacent to each other, mounted on the same wall and in the same room.

2012 12 Unit Telephone Line Relay Card

The 2012 Telephone Line Relay Card plugs into the Backplane Boards of the NSL Relay Cabinets. Each Backplane supports eight 2012 relay cards for a total of 128 relays per NSL Backplane. Each 2102 Telephone Line Relay Card provides for connection to 12 resident telephone lines for a maximum of 1,536 per system. The connections are done via the CA-71A (Canada) BIX Block or RJ-71C (U.S.A.) Punch Down Block Wiring Configuration. The 50 pin Amphenol connector on the BIX block is connected to the 2012 relay card using the standard 9106 relay cable.

2012E 12 Unit Elevator Restriction Relay Cards

Distributed The 2012E Elevator Restriction Relay Card plugs into the Backplane portion of the 2008E Elevator Restriction Unit. Each 2012E has 12 Form “A” or “B” (Each is Jumper selectable as Normally Closed or Normally Open) Relay contacts rated at 28 VDC, 0.5 ampere. A total of eight 2012E Elevator Restriction Relay Cards mount into each 2008E Unit for a total of 96 elevator restriction relays.

2016 16 Relay Card Expander Cabinet

9106 6 ft. Relay Cable

The 9106 6 ft. Relay Cable is used to connect the 2012 relay card to the 50 pin Amphenol connector on the BIX block. One relay cable is required per 2012 relay card.

ADSL-100 NSL Line Filter for the TAS-2000