|
|
|
|
|
|
|
|
|
|
Features 50 watts RMS per channel power amplifier with complete custom installer feature set Bridgeable outputs for 150 watts RMS total output power 2 stereo inputs with automatic priority override, and one auxiliary output A, B, or A+B Speaker Selector Switches Front-panel mounted Volume and Balance knobs Manual or Signal-Sensing Power-On 5-way speaker wire binding posts for bare wire or Banana plugs Specifications 50 watts RMS per channel into 8 ohm loads with .02% THD+N 60 watts RMS per channel into 4 ohm loads with .02% THD+N Maximum 8 ohm stereo output power at 1% THD+N: 60W Maximum 4 ohm stereo output power at 1% THD+N: 75W Maximum 8 ohm Bridged-Mono output at 1% THD+N: 160W Input needed to reach full output: 1.4v Frequency Response: (20Hz-20kHz)+1dB, -0.5dB; (5Hz-65kHz)+/-3dB Signal to Noise Ratio: 107dB (A-Weighted) Dimensions: 2.9"H x 16.5"W x 9.25"D Weight: 9.6 lbs Power Consumption: 500W
|
Features 80 watts RMS per channel power amplifier with complete custom installer feature set Bridgeable outputs for 250 watts RMS total output power Toroidal Power Supply 2 stereo low-level (RCA) inputs and one high-level (speaker) input, and one auxiliary low-level output Automatic source switching with adjustable delay timer (3-15 seconds) Two sets of speaker outputs selectable from the front panel Rear mounted L/R main volume controls with front mounted volume and balance trim controls Flexible Power-on: Switched, Signal Sensing, and 12v trigger 5-way speaker wire binding posts for bare wire or Banana plugs Specifications 80W per CH into 8 ohm loads with less than 0.2% THD+N 125W per CH into 4 ohm loads with less than 0.2% THD+N 250W Bridged Mono into 8 ohms with less than 0.2% THD+N Crosstalk: >65dB @ 1kHz, ref. to rated power into 8 ohms Frequency Response: (20Hz to 20kHz)+0.0dB, -0.5dB Signal to Noise ratio: -103dB ref. to rated power into 4 ohms AC Power Consumption: 700W (all channels driven) Net Weight: 24.3 lbs (11.0 kgs) Gross Weight: 32.2 lbs (14.6.0 kgs)
|
|
|
|
|
|
|
|
|
|
|
|
|
Audiosource AMP51 100W Amplifier
|
Features All the high-current output you need with none of the features you don't need 80 watts RMS per channel stereo power amplifier with internal bridging Torrodial Power Supply Stable into 2 ohm speaker loads One stereo input and one stereo auxiliary output Rear mounted Stereo/Bridged switch Truely an unbeatable power amplifier for the price 5 way speaker wire binding posts for bare wire or banana plugs Specifications 80 watts RMS per channel into 8 ohm loads 100 watts RMS per channel into 4 ohm loads 200 watts RMS bridged into 8 ohm loads Total Harmonic Distortion: <0.04% Intermodulation Distortion: <0.04% Frequency Response: 20Hz-20kHz, +/-0.5dB Signal to Noise Ratio: 110dB Input needed to reach full output: 0.8v Input Impedance: 30kohm Headroom: 2dB Dimensions: 16.5" W x 2.375" H x 11.625" D Weight: 14 lbs, 5 oz
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbon-Filled Polypropylene woofers with Butyl rubber surround which is long lasting and moisture resistant. treated silk dome swivel tweeters with ferro fluid cooled voice coil for extended highs and better power handling capabilities. Moisture resistant. Ideal for home theater applications or distributed sound. Baked enamel coated grill is rust proof and easy to paint. Solid dog-leg mounting system. 5.25" two-way 60 watt speaker 19mm (3/4") pivoting tweeter Packaged in pairs
|
Features Carbon-Filled Polypropylene woofers with Butyl rubber surround which is long lasting and moisture resistant. treated silk dome swivel tweeters with ferro fluid cooled voice coil for extended highs and better power handling capabilities. Moisture resistant. Ideal for home theater applications or distributed sound. Baked enamel coated grill is rust proof and easy to paint. Solid dog-leg mounting system. Specifications 5.25" two-way 200 watt speaker 75W power handling 25mm (1in) wivel tweeter sold in pairs
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbon-Filled Polypropylene woofers with Butyl rubber surround which is long lasting and moisture resistant. treated silk dome swivel tweeters with ferro fluid cooled voice coil for extended highs and better power handling capabilities. Moisture resistant. Ideal for home theater applications or distributed sound. Baked enamel coated grill is rust proof and easy to paint. Solid dog-leg mounting system. 6.5" two way 75 watt speaker 25mm (1in) pivoting tweeter Packaged in pairs
|
Features Carbon-Filled Polypropylene woofers with Butyl rubber surround which is long lasting and moisture resistant. treated silk dome swivel tweeters with ferro fluid cooled voice coil for extended highs and better power handling capabilities. Moisture resistant. Ideal for home theater applications or distributed sound. Baked enamel coated grill is rust proof and easy to paint. Solid dog-leg mounting system. Specifications 6.5 dual voice coil 75 watt speaker Summed mono with dual 19mm (3/4in) tweeters Packaged as single
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for table top applications. Use with AST-220S satellite speakers. Includes hardware Sold in pairs Base Dimensions: 9in Diameter x 1.25 H
|
10 band stereo graphic equalizer Dual tape monitor loop Multi colored spectrum analyzer display. 6 week lead time LEDs in all sliders
|
|
|
|
|
|
|
|
|
|
|
|
|
Audiosource ISM4 Black 4-Position Speaker Selector W/Manual Protect
|
Audiosource ISM4 Black 4-Position Speaker Selector W/Manual Protect
|
|
|
