You are here: Home > Shop Brands > Audiosource > Amplifiers
We found 6 results matching your criteria.
Sort By:
Page of 1
Audiosource AMP100 2-Channel Source Switching Power Amplifier, 50W Audiosource AMP200 2-Channel Source Switching Power Amplifier 80W
Features
  • 50 watts RMS per channel power amplifier with complete custom installer feature set
  • Bridgeable outputs for 150 watts RMS total output power
  • 2 stereo inputs with automatic priority override, and one auxiliary output
  • A, B, or A+B Speaker Selector Switches
  • Front-panel mounted Volume and Balance knobs
  • Manual or Signal-Sensing Power-On
  • 5-way speaker wire binding posts for bare wire or Banana plugs

    Specifications
  • 50 watts RMS per channel into 8 ohm loads with .02% THD+N
  • 60 watts RMS per channel into 4 ohm loads with .02% THD+N
  • Maximum 8 ohm stereo output power at 1% THD+N: 60W
  • Maximum 4 ohm stereo output power at 1% THD+N: 75W
  • Maximum 8 ohm Bridged-Mono output at 1% THD+N: 160W
  • Input needed to reach full output: 1.4v
  • Frequency Response: (20Hz-20kHz)+1dB, -0.5dB; (5Hz-65kHz)+/-3dB
  • Signal to Noise Ratio: 107dB (A-Weighted)
  • Dimensions: 2.9"H x 16.5"W x 9.25"D
  • Weight: 9.6 lbs
  • Power Consumption: 500W
  • Features
  • 80 watts RMS per channel power amplifier with complete custom installer feature set
  • Bridgeable outputs for 250 watts RMS total output power
  • Toroidal Power Supply
  • 2 stereo low-level (RCA) inputs and one high-level (speaker) input, and one auxiliary low-level output
  • Automatic source switching with adjustable delay timer (3-15 seconds)
  • Two sets of speaker outputs selectable from the front panel
  • Rear mounted L/R main volume controls with front mounted volume and balance trim controls
  • Flexible Power-on: Switched, Signal Sensing, and 12v trigger
  • 5-way speaker wire binding posts for bare wire or Banana plugs

    Specifications
  • 80W per CH into 8 ohm loads with less than 0.2% THD+N
  • 125W per CH into 4 ohm loads with less than 0.2% THD+N
  • 250W Bridged Mono into 8 ohms with less than 0.2% THD+N
  • Crosstalk: >65dB @ 1kHz, ref. to rated power into 8 ohms
  • Frequency Response: (20Hz to 20kHz)+0.0dB, -0.5dB
  • Signal to Noise ratio: -103dB ref. to rated power into 4 ohms
  • AC Power Consumption: 700W (all channels driven)
  • Net Weight: 24.3 lbs (11.0 kgs)
  • Gross Weight: 32.2 lbs (14.6.0 kgs)
  • Audiosource AMPONEA 80W 2-Channel Power Amplifier Audiosource EQ200 10 Band Graphic Equalizer
    Features
  • All the high-current output you need with none of the features you don't need
  • 80 watts RMS per channel stereo power amplifier with internal bridging
  • Torrodial Power Supply
  • Stable into 2 ohm speaker loads
  • One stereo input and one stereo auxiliary output
  • Rear mounted Stereo/Bridged switch
  • Truely an unbeatable power amplifier for the price
  • 5 way speaker wire binding posts for bare wire or banana plugs

    Specifications
  • 80 watts RMS per channel into 8 ohm loads
  • 100 watts RMS per channel into 4 ohm loads
  • 200 watts RMS bridged into 8 ohm loads
  • Total Harmonic Distortion: <0.04%
  • Intermodulation Distortion: <0.04%
  • Frequency Response: 20Hz-20kHz, +/-0.5dB
  • Signal to Noise Ratio: 110dB
  • Input needed to reach full output: 0.8v
  • Input Impedance: 30kohm
  • Headroom: 2dB
  • Dimensions: 16.5" W x 2.375" H x 11.625" D
  • Weight: 14 lbs, 5 oz
  • 10 band stereo graphic equalizer
  • Dual tape monitor loop
  • Multi colored spectrum analyzer display. 6 week lead time
  • LEDs in all sliders
  • Audiosource PREAMPRMT Remote Control for Preamplifier Tuner2 AudioSource AMP310 Power Amplifier
    Audiosource PREAMPRMT Remote Control for Preamplifier Tuner2 With its continued excellence in sound reproduction, AudioSource has once again created a versatile stereo amplifier. The AMP310 Power Amplifier offers superb functionality and Dual-Zone capability that will be hard to match. It features Triple-Darlington power amplifier stages, front panel diagnostic LEDs, 2-stereo (low-level) inputs, speaker (high-level) inputs, and one auxiliary (low-level) output. In a nutshell, this amplifier is a 150W 2-Channel stereo amplifier capable of delivering breathtaking stereo sound, with an audio signal-to-noise ratio of 100dB.

    In addition, it features an expandable daisy-chain input/output for your audio components, rack mounting capabilities, an amazing 5Hz - 35KHz frequency response, A/B speaker switch, adjustable time delay between zones, light bar display switch, rear master level-control, 225W stereo output into 4 ohms, and 450W bridgeable mono output into 8 ohms. Because of the high efficiency of its design, the AMP310 produces exceptional sound quality, and clarity in every audible detail.

       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please