You are here: Home > Shop Brands > CE Labs / Cable Electronics, Inc.
We found 22 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

CE Labs / Cable Electronics, Inc.

  Audio Video Distribution Amplifiers
  Cables
  CAT5
  Modulators
  Power Supply
  RF Amplifiers
Audio Video Distribution Amplifiers
Cables
CAT5
Modulators
Power Supply
RF Amplifiers
Sort By:
Page of 2
CE Labs  CAT5RX  A/V CAT5 Distributor Receiver CE Labs  CAT5TX  A/C CAT 5 Distribution Hub
Receives the CAT-5 signals from the CEICAT5TX transmitter Converts the signal to a high-definition component video, digital or left/right audio; Cable length equalizer & video continuity LEDs receives all video signals; Distributes high definition component or composite video and digital or left and right audio over extended distances using CAT5 wire. Use in conjunction with CAT5TX.

CAT5 TX - Transmitter
  • Active amplification ensures high quality transmission
  • Loop output for use of additional CAT5 transmitters
  • Two CAT5 outputs for additional location
  • Discrete passive IR channel for the use of external IR remote control systems

    CAT5 RX - Receiver
  • Cable length equalizer for long distances
  • Video continuity LEDs to ensure all signals are transmitting
  • IR port

    Video
  • Nominal Input Level: 1 Volt peak to peak
  • Gain: 1 Volt into 75 ohms (2 Volts unterminated)
  • Input Impedance (CAT5 TX): 75 ohms
  • Output Impedance (CAT5 RX): 75 ohms
  • Isolation port to port: > 65 dB
  • Isolation out to input: > 80 dB
  • Return loss: > 30 dB
  • Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
  • Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
  • 3 composite video signals may be substituted on the individual component video inputs (1000 Ft. max).

    Audio (Analog)
  • Nominal Input level: 1 Volt peak to peak
  • Gain: Unity (slightly reduced at max cable length)
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • Frequency Response: 20 Hz to 20 KHz
  • Signal to Noise: 80 dB @ 1 Volts out

    Audio (Digital)
  • Supports standard SPDIF digital audio

    Power
  • Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.
  • Receives the CAT-5 signals from the CEICAT5TX transmitter Converts the signal to a high-definition component video, digital or left/right audio; Cable length equalizer & video continuity LEDs receives all video signals; Distributes high definition component or composite video and digital or left and right audio over extended distances using CAT5 wire. Use in conjunction with CAT5TX.

    CAT5 TX - Transmitter
  • Active amplification ensures high quality transmission
  • Loop output for use of additional CAT5 transmitters
  • Two CAT5 outputs for additional location
  • Discrete passive IR channel for the use of external IR remote control systems

    CAT5 RX - Receiver
  • Cable length equalizer for long distances
  • Video continuity LEDs to ensure all signals are transmitting
  • IR port

    Video
  • Nominal Input Level: 1 Volt peak to peak
  • Gain: 1 Volt into 75 ohms (2 Volts unterminated)
  • Input Impedance (CAT5 TX): 75 ohms
  • Output Impedance (CAT5 RX): 75 ohms
  • Isolation port to port: > 65 dB
  • Isolation out to input: > 80 dB
  • Return loss: > 30 dB
  • Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
  • Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
  • 3 composite video signals may be substituted on the individual component video inputs (1000 Ft. max).

    Audio (Analog)
  • Nominal Input level: 1 Volt peak to peak
  • Gain: Unity (slightly reduced at max cable length)
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • Frequency Response: 20 Hz to 20 KHz
  • Signal to Noise: 80 dB @ 1 Volts out

    Audio (Digital)
  • Supports standard SPDIF digital audio

    Power
  • Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.
  • CE Labs 4004G 4-Chan CEX Tech w/DVD Cap on 2 Channels CE Labs 400COMPPS AV400COMP Power Supply
    CEX® UP your whole house A/V distribution system with CE Labs' patented audio technologies.The NEW audio standard with the only DVD compatible RF modulation technology and unsurpassed stereo surround sound performance. CEX elevates your total entertainment experience. The Theater 4004G/4202G distributes any four audio/video source, such as DBS satellite receiver, DVD player or VCR, to any TV in the house.

  • Four channels stereo with CEX Stereo Surround Sound Technology
  • Four channels DVD compatibility
  • Digital PLL tuning eliminates channel drift
  • 125 digitally selectable channels for easy channel selection
  • UHF channels 14-69; Cable channels 54-94, 100-125
  • Audio/video loop through for direct source input
  • Band pass filter eliminates RF interference
  • Digital readout
  • Special Order Item
    CE Labs 400COMPPS AV400COMP Power Supply
    CE Labs 4202G  CEX Tech w/DVD CAP 2-Channel Mono CE Labs 6001 1GHZ 20DB RF AM 1-In/1-Out Bidirectional Amplifier w/Antenna
  • Two channels stereo with CEX Surround Sound Technology, two channels mono
  • Stereo channels DVD compatible
  • Gold inputs and outputs
  • Digital PLL tuning eliminates channel drift
  • 125 digitally selectable channels for easy channel selection
  • UHF channels 14-69; Cable channels 54-94, 100-125
  • Audio/video loop through for direct source input
  • Band pass filter eliminates RF interference
  • Digital readout
  • Download Spec Sheet
  • Features
  • Compatible with HDTV and cable modems
  • 1 GHz bandwidth bidirectional amplifier
  • High pass filter: 54 MHz to 1 GHz reduces cross mod
  • Low pass filter: 5 MHz to 40 MHz in return path
  • 20 dB Forward Gain with 20 dB Adjustable Attenuator

    Specifications
  • Forward Path: 54 - 1000 MHz
  • Return Path: 5 - 40 MHz
  • Forward Gain: +20 dB +1.0 dB -2.0 dB
  • Return Path: -0.5 dB
  • Flatness Forward Path: +/- 1.5 dB
  • Return Loss Minimum: > 14 dB
  • Noise Figure Maximum: 2 dB
  • Dist. X-mod: -65 dB
  • CTB: -60 dB
  • RFI Shielding: > 85 dB
  • Input Attenuator: 20 dB +20 to 0
  • Channel Band Capacity:
  • VHF, UHF, CATV
  • Power: 110 VAC/5.5 W
  • Transformer: 12 Volt Unregulated 200 MA
  • CE Labs 6002 1GHZ 1-In/1-Out Bidirectional  Drop Amplifier RF Distribution Amplifier CE Labs APW9VAC60  Power Supply for AB400COMP, CAT5TX, CAT5RX
  • Frequency range: Forward path 54-1000 MHz; Reverse path 4-42 MHz
  • Forward gain: +15 dB
  • Typical input range: 0 to +10 dBmV @ 110 channels
  • Maximum input: +30 dBmV @ 12 Channels
  • Reverse path: -1 dB
  • Forward path response: +/- 0.6 dB
  • Transformer: 110 V AC/5 W, output +12 Volt DC, 200 mA
  • CE Labs APW9VAC60 Power Supply for AB400COMP, CAT5TX, CAT5RX
    CE Labs AV400 1 In / 4 Out Composite Video Audio Distribution Amplifier CE Labs AV400COMP  1 In / 4 Out HDTV, Component, Video & Audio Distribution Amplifier
    Distribute audio, composite video and s-video television signals from a single A/V source to multiple television monitors.

  • Composite audio and video
  • No signal loss
  • Unity gain
  • Daisy chain several units for larger displays w/great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs

    Video
  • Gain: 2 Volt unterminated, 1 Volt Terminated: 75 ohms + 5%
  • Input Impedance: 75 ohms + 5%
  • Output Impedance: 75 ohms + 5%
  • Video Insertion Loss: 50 Hz to 10 MHz < .40 dB
  • In to Out Isolation: 50 Hz to 10 MHz 32 dB Port to Port
  • Out to In Isolation: 50 Hz to 10 MHz 60 dB
  • Return Loss: 50 Hz to 10 MHz 20 dB
  • Video Bandwidth: > 10 MHz (AV400, AV700, AV400SV)

    Audio
  • Gain: Unity
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • THD: 0.05% at 1.0 Volts input level
  • Frequency Response: 20 Hz to 100 KHz
  • Channel Separation: > 75 dB @ 1 KHz
  • In to Out Isolation: 60 dB
  • Out to Out Isolation: 60 dB
  • Signal to Noise: 100 dB re 2 Volts (out)
  • Distribute HDTV and analog television signals from a single A/V source to multiple television receivers.

  • Daisy chain several units for larger displays w/great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers Video
  • Gain: 2 Volt unterminated, 1 Volt Terminated: 75 ohms + 5%
  • Input Impedance: 75 ohms + 5%
  • Output Impedance: 75 ohms + 5%
  • Video Insertion Loss: 50 Hz to 10 MHz < .40 dB
  • In to Out Isolation: 50 Hz to 10 MHz 32 dB Port to Port
  • Out to In Isolation: 50 Hz to 10 MHz 60 dB
  • Return Loss: 50 Hz to 10 MHz 20 dB
  • Video Bandwidth: > 100 MHz Audio Response: > 100 KHz

    Audio
  • Gain: Unity
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • THD: 0.05% at 1.0 Volts input level
  • Frequency Response: 20 Hz to 100 KHz
  • Channel Separation: > 75 dB @ 1 KHz
  • In to Out Isolation: 60 dB
  • Out to Out Isolation: 60 dB
  • Signal to Noise: 100 dB re 2 Volts (out)
  • CE Labs AV400SV  1 In / 4 Out Component Video/Audio/S-Video Distribution Amplifier CE Labs AV501HD 1 IN / 5 OUT Composite Video/Digital Audio/Analog Audio Distribution Amplifier
    Distribute HDTV and analog television signals from a single A/V source to multiple television receivers.

  • Composite or S video
  • No signal loss
  • Unity gain
  • Daisy chain several units for larger displays w/great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs

    Video
  • Gain: 2 Volt unterminated, 1 Volt Terminated: 75 ohms + 5%
  • Input Impedance: 75 ohms + 5%
  • Output Impedance: 75 ohms + 5%
  • Video Insertion Loss: 50 Hz to 10 MHz < .40 dB
  • In to Out Isolation: 50 Hz to 10 MHz 32 dB Port to Port
  • Out to In Isolation: 50 Hz to 10 MHz 60 dB
  • Return Loss: 50 Hz to 10 MHz 20 dB
  • Video Bandwidth: > 100 MHz
  • Audio Response: > 100 KHz

    Audio
  • Gain: Unity
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • THD: 0.05% at 1.0 Volts input level
  • Frequency Response: 20 Hz to 100 KHz
  • Channel Separation: > 75 dB @ 1 KHz
  • In to Out Isolation: 60 dB
  • Out to Out Isolation: 60 dB
  • Signal to Noise: 100 dB re 2 Volts (out)
  • Distribute HDTV and analog television signals from a single A/V source to multiple television receivers. Daisychain to large number of televisions with equal picture quality. Save the expense of additional A/V receivers and allow up to 150 ft. runs.

  • Composite signals, component video with baseband audio, or component video with digital audio
  • HDTV Distribution
  • No signal loss
  • Unity gain
  • Daisy chain several units for larger HDTV displays
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs

    Video
  • Gain: 2 Volt unterminated, 1 Volt Terminated: 75 ohms + 5%
  • Input Impedance: 75 ohms + 5%
  • Output Impedance: 75 ohms + 5%
  • Video Insertion Loss: 50 Hz to 10 MHz < .40 dB
  • In to Out Isolation: 50 Hz to 10 MHz 32 dB Port to Port
  • Out to In Isolation: 50 Hz to 10 MHz 60 dB
  • Return Loss: 50 Hz to 10 MHz 20 dB
  • Video Bandwidth: > 100 MHz
  • Audio Response: > 100 KHz

    Audio
  • Gain: Unity
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • THD: 0.05% at 1.0 Volts input level
  • Frequency Response: 20 Hz to 100 KHz
  • Channel Separation: > 75 dB @ 1 KHz
  • In to Out Isolation: 60 dB
  • Out to Out Isolation: 60 dB
  • Signal to Noise: 100 dB re 2 Volts (out)
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please