You are here: Home > Shop Brands > CE Labs / Cable Electronics, Inc. > CAT5
We found 2 results matching your criteria.
Sort By:
Page of 1
CE Labs  CAT5RX  A/V CAT5 Distributor Receiver CE Labs  CAT5TX  A/C CAT 5 Distribution Hub
Receives the CAT-5 signals from the CEICAT5TX transmitter Converts the signal to a high-definition component video, digital or left/right audio; Cable length equalizer & video continuity LEDs receives all video signals; Distributes high definition component or composite video and digital or left and right audio over extended distances using CAT5 wire. Use in conjunction with CAT5TX.

CAT5 TX - Transmitter
  • Active amplification ensures high quality transmission
  • Loop output for use of additional CAT5 transmitters
  • Two CAT5 outputs for additional location
  • Discrete passive IR channel for the use of external IR remote control systems

    CAT5 RX - Receiver
  • Cable length equalizer for long distances
  • Video continuity LEDs to ensure all signals are transmitting
  • IR port

    Video
  • Nominal Input Level: 1 Volt peak to peak
  • Gain: 1 Volt into 75 ohms (2 Volts unterminated)
  • Input Impedance (CAT5 TX): 75 ohms
  • Output Impedance (CAT5 RX): 75 ohms
  • Isolation port to port: > 65 dB
  • Isolation out to input: > 80 dB
  • Return loss: > 30 dB
  • Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
  • Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
  • 3 composite video signals may be substituted on the individual component video inputs (1000 Ft. max).

    Audio (Analog)
  • Nominal Input level: 1 Volt peak to peak
  • Gain: Unity (slightly reduced at max cable length)
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • Frequency Response: 20 Hz to 20 KHz
  • Signal to Noise: 80 dB @ 1 Volts out

    Audio (Digital)
  • Supports standard SPDIF digital audio

    Power
  • Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.
  • Receives the CAT-5 signals from the CEICAT5TX transmitter Converts the signal to a high-definition component video, digital or left/right audio; Cable length equalizer & video continuity LEDs receives all video signals; Distributes high definition component or composite video and digital or left and right audio over extended distances using CAT5 wire. Use in conjunction with CAT5TX.

    CAT5 TX - Transmitter
  • Active amplification ensures high quality transmission
  • Loop output for use of additional CAT5 transmitters
  • Two CAT5 outputs for additional location
  • Discrete passive IR channel for the use of external IR remote control systems

    CAT5 RX - Receiver
  • Cable length equalizer for long distances
  • Video continuity LEDs to ensure all signals are transmitting
  • IR port

    Video
  • Nominal Input Level: 1 Volt peak to peak
  • Gain: 1 Volt into 75 ohms (2 Volts unterminated)
  • Input Impedance (CAT5 TX): 75 ohms
  • Output Impedance (CAT5 RX): 75 ohms
  • Isolation port to port: > 65 dB
  • Isolation out to input: > 80 dB
  • Return loss: > 30 dB
  • Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
  • Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
  • 3 composite video signals may be substituted on the individual component video inputs (1000 Ft. max).

    Audio (Analog)
  • Nominal Input level: 1 Volt peak to peak
  • Gain: Unity (slightly reduced at max cable length)
  • Input Impedance: 22k ohm
  • Output Impedance: 1k ohm
  • Frequency Response: 20 Hz to 20 KHz
  • Signal to Noise: 80 dB @ 1 Volts out

    Audio (Digital)
  • Supports standard SPDIF digital audio

    Power
  • Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please