|
|
|
|
|
|
|
|
|
|
The G.R.I. Temperature Sensor is a surface mount switch and comes equipped with three feet of 2 conductor cable to assist in installation. The T8060 can be mounted almost anywhere and their small size allows them to be very unobtrusive. Mounting hardware is included. When the normal ambient temperature in the monitored area is above the trip temperature of the Sensor, it must be connected in an Open Circuit alarm loop. When the desired monitored temperature is below the trip temperature, the Sensor must be wired in a Closed Circuit Loop. General temperature monitoring Low cost protection Easy to install Small, unobtrusive Surface Mount Available by special order in 9°F increments from 23°F to 140°F. 1000 piece minimum order
|
Accepted by fire marshals, this cover is designed for areas where a "break glass" cover is specified, such as unsupervised areas. It consists of a red polycarbonate cover, mounting frame, a pane of single-strength clear glass (easily replaced when broken), a glass-breaking bar and anchors for installation
Local fire marshal approval should be obtained prior to installation.
Features: - Housing is molded of super tough polycarbonate.
- Fire alarm remains clearly visible and accessible.
- Fast and easy installation.
- Simple glass replacement.
- Accepted by many fire marshals.
- Lifetime guarantee on polycarbonate housing against breakage and damage in normal use.
- Fits virtually all manual pull stations (see Technical Data Sheet for dimensions)
- Polycarbonate tested -40° F to 240° F (-40° C to 116° C).
|
|
|
|
|
|
|
|
|
|
|
|
|
For places where a "break glass" cover is specified such as unsupervised areas.
Accepted by many fire marshals, these versions of the world famous STI Stopper® II are designed for areas where a "break glass" cover is specified. Each device consists of a red polycarbonate cover, mounting frame, a pane of single-strength clear glass (easily replaced when broken), a glass-breaking bar and anchors for installation.
Local fire marshal approval should be obtained prior to installation.
Features: - Housing is molded of super tough polycarbonate material.
- Aesthetically appealing.
- Fire alarm remains clearly visible and accessible.
- Lifetime guarantee on polycarbonate housing against breakage and damage in normal use.
- Fast and easy installation.
- Glass replacement is simple. (Suggestion: Order extra panes with each unit).
- Accepted by many fire marshals.
- Polycarbonate tested -40°F to 240°F (-40° C to 116°C)
|
This protective Keys Under Glass Cover allows emergency keys to be readily available in case of emergency, but not too accessible. Keys remain visible on an internal hook while being protected by a face of protective glass. In order for someone to get the keys, they will have to break the glass. Easy to install. Once installed, the cover allows authorized entries.
Features: - Excellent way to protect emergency keys from wrongful use.
- Keys remain visible as well as available in case of an emergency.
- Simple, inexpensive glass replacement (Item number SUB 67).
- Lifetime guarantee against breakage of the polycarbonate housing.
- Fast and easy installation.
- Dimensions the same as STI 6100 Break Glass Stopper.
|
|
|
|
|
|
|
|
|
|
|
|
|
This protective Break Glass Stopper allows emergency keys to be readily available in case of emergency, but not too accessible. Keys remain visible on an internal hook while being protected by a pane of plexiglas. In order for someone to get the keys, they will have to break the plexiglas. Easy to install, once the cover is mounted on the wall and the cover is secured, the only way to access the inside is by breaking the plexiglas.
Features: - Excellent way to protect emergency keys from wrongful use.
- Keys remain visible as well as available in case of an emergency.
- Fast and easy installation.
- Simple, inexpensive plexiglas replacement (Item number SUB 672).
- Lifetime guarantee against breakage of the ABS housing.
|
The Model 17A00-1 Expansion Enclosure adds sixteen voltage outputs for control and sixteen inputs for additional security/fire zones, auxiliary or temperature inputs. The 17A00-1 can be mounted up to 1000 feet from the main controller and has its own power supply and battery. It reduces wiring use in larger installations. It is commonly used for sprinkler systems, control of pumps, motors, remote control circuit breakers, and additional security/fire zones. Up to four Expansion Enclosures can be used in conjunction with the HAI Lumina Pro, OmniPro, or OmniPro II home control system. Optional Model 19A00-1 8-Relay Module and Model 10A07-1 4-Relay Module mount in the enclosure. It comes with a lock set with two keys.
Specifications:
Manufacturer: HAI
Manufacturer Product No.: 17A00-1
Compatibility: OmniPro II
Inputs: 16
Outputs: 16
Capacity: Up to 176 zones
|
|
|
|
|
|
|
|
|
|
|
|
The 600 Watt UPB Non-Dimming Switch is used for controlling loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions. Switch Color Change Kits (HAI Part Number 35A14-color code) are available in White (WH), Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors.
Specifications:
Manufacturer: HAI
Manufacturer Product No.: 35A00-3
Dimensions: 4.1" x 1.75" x 1.45"
Weight: 0.25 lb.
Power Maximum: 600 W
Current Maximum: 5A
Connections: 18 GA
Mounting: Standard J box
Input Power: 120 +/- 12V AC
Input Frequency: 60 +/- 3 Hz
Operating Temperature: -40° F to 104° F
Compliance: UL, CE approved
|
- Panasonic DECT 6.0 2-Line expandable corded/cordless combo with digital answering system
- Includes 1 corded base unit and 2 cordless handsets with chargers
- Expands up to 6 handsets total
- DECT 6.0 provides great sound and clear conver
|
|
|
