You are here: Home > Shop Brands > Gentex Corp. > Fire Protection > Audible/Visual Signaling Appliances > Commander4 Series Selectable Ceiling Mount Strobe and Horn Strobe
We found 9 results matching your criteria.
Sort By:
Page of 1
Gentex Corp 9041209 Horn/Strobe Multi-Candella Ceiling-Mount Red Gentex Corp 9041209HD Horn/Strobe Multi-Candella Ceiling-Mount Red
The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041211 Horn/Strobe Multi-Candella Ceiling-Mount White Gentex Corp 9041212 Horn/Strobe Multi-Candella Ceiling-Mount White No Lettering
    The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041213 Strobe Multi-Candella Ceiling-Mount Red Gentex Corp 9041213HD Strobe Multi-Candella Ceiling-Mount Red
    The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041214 Strobe Multi-Candella Ceiling-Mount Red, No Lettering Gentex Corp 9041215 Strobe Multi-Candella Ceiling-Mount White
    The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041216 Strobe Multi-Candella Ceiling-Mount White, No Lettering
    The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

    The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

    The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

    The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

    Standard Features
  • Nominal Voltage 24 VDC
  • Tamperproof Field Selectable Candela options of 15, 30, 75, 95,115 & 150
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 6 x 2.6
  • Synchronize GC Series by using Gentex Series Control Module
  • Prewire Entire System, then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please