You are here: Home > Shop Brands > Gentex Corp. > Fire Protection > Audible/Visual Signaling Appliances > Commander3 Series Selectable Candela Evacuation Signals
We found 16 results matching your criteria.
Sort By:
Page of 2
Gentex Corp 9041231 Low Profile Evacuation Horn/Strobe, Selectable Candela, 12VDC, Wall-Mount, Red Gentex Corp 9041233 Low Profile Evacuation Horn/Strobe, Selectable Candela, 12VDC, Wall-Mount, White
The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041234 Low Profile Evacuation Horn/Strobe, Selectable Candela, 12VDC, Wall-Mount, White, No Lettering Gentex Corp 9041235 Low Profile Evacuation Strobe, Selectable Candela, 12VDC, Wall-Mount,  Red
    The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041237 Low Profile Evacuation Strobe, Selectable Candela, 12VDC, Wall-Mount,  White Gentex Corp 9041238 Low Profile Evacuation Strobe, Selectable Candela, 12VDC, Wall-Mount, White, No Letters
    The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041239 Low Profile Evacuation Horn 12VDC Red Gentex Corp 9041241 Low Profile Evacuation Horn 12VDC, White
    The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041315 Low Profile Evacuation Horn/Strobe, Selectable Candela, 24VDC, Wall-Mount, White Gentex Corp 9041316 Low Profile Evacuation Horn/Strobe, Selectable Candela, 24VDC, Wall-Mount, White, No Lettering
    The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041317 Low Profile Evacuation Horn/Strobe, Selectable Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041318 Low Profile Evacuation Horn/Strobe, Selectable Candela, 24VDC, Wall-Mount, Red, No Lettering
    The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please