You are here: Home > Shop Brands > Gentex Corp. > Fire Protection > Audible/Visual Signaling Appliances > Commander2 Series Low Frequency Evacuation Signals
We found 35 results matching your criteria.
Sort By:
Page of 3
Gentex Corp 9041125 Low Profile Evacuation Horn/Strobe, 15 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041127 Low Profile Evacuation Horn/Strobe, 15/75 Candela, 24VDC, Wall-Mount, Red
The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041129 Low Profile Evacuation Horn/Strobe, 30 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041133 Low Profile Evacuation Horn/Strobe, 60 Candela, 24VDC, Wall-Mount, Red
    The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041135 Low Profile Evacuation Horn/Strobe, 75 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041135 Low Profile Evacuation Horn/Strobe, 75 Candela, 24VDC, Wall-Mount, Red
    The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041139 Low Profile Evacuation Horn/Strobe, 110 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041143 Low Profile Evacuation Horn/Strobe, 177 Candela, 24VDC, Wall-Mount, Red
    The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041145 Low Profile Evacuation Horn/Strobe, 15 Candela, 24VDC, Wall-Mount, White Gentex Corp 9041146 Low Profile Evacuation Horn/Strobe, 15 Candela, 24VDC, Wall-Mount, No Lettering, White
    The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041147 Low Profile Evacuation Horn/Strobe, 15/75 Candela, 24VDC, Wall-Mount, White Gentex Corp 9041148 Low Profile Evacuation Horn/Strobe, 15/75 Candela, 24VDC, Wall-Mount, No Lettering, White
    The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please