You are here: Home > Shop Brands > Gentex Corp. > Fire Protection > Audible/Visual Signaling Appliances > Commander Series Low Current Strobe and Horn Strobe
We found 28 results matching your criteria.
Sort By:
Page of 3
Gentex Corp 9040993 Low Profile Remote Horn/Strobe, 15 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9040995 Low Profile Remote Horn/Strobe, 15/75 Candela, 24VDC, Wall-Mount, Red
The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • Gentex Corp 9040996 Low Profile Remote Horn/Strobe, 15/75 Candela, 24VDC, Wall-Mount, No Lettering, Red Gentex Corp 9040997 Low Profile Remote Horn/Strobe, 30 Candela, 24VDC, Wall-Mount, Red
    The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • Gentex Corp 9041001 Low Profile Remote Horn/Strobe, 60 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041003 Low Profile Remote Horn/Strobe, 75 Candela, 24VDC, Wall-Mount, Red
    The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • Gentex Corp 9041007 Low Profile Remote Horn/Strobe, 110 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041008 Low Profile Remote Horn/Strobe, 110 Candela, 24VDC, Wall-Mount, No Lettering, Red
    The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • Gentex Corp 9041013 Low Profile Remote Horn/Strobe, 15 Candela, 24VDC, Wall-Mount, White Gentex Corp 9041014 Low Profile Remote Horn/Strobe, 15 Candela, 24VDC, Wall-Mount, No Lettering, White
    The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • Gentex Corp 9041015 Low Profile Remote Horn/Strobe, 15/75 Candela, 24VDC, Wall-Mount, White Gentex Corp 9041016 Low Profile Remote Horn/Strobe, 15/75 Candela, 24VDC, Wall-Mount, No Lettering, White
    The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  • The Commander Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The Commander Series is a room alert notification appliance; applications include hallways, rooms, sleeping rooms, restrooms or any high ambient-noise level area.

    The ST/HS Series is offered in fixed candela options of 15, 30, 60, 75, 110 and 15/75. The HS models are easily field changeable from temporal 3 to a continuous tone by simply removing a jumper plug. The HS models are shipped from the factory in the temporal three mode. The Commander Series comes standard with the 4" mounting plate.

    The Commander Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The ST/HS Series are UL 464, UL 1971 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC
  • Fixed Candela Options of 15, 30, 60, 75, 110 and 15/75
  • Unit Dimensions: 5.6 high x 4.5 wide x 3.4 overall depth (backplate 1.3 deep)
  • Tamperproof Re-Entrant Grill
  • Separate Horn and Strobe Capabilities
  • Wide Voltage Range - 16-33VDC or FWR
  • Input Terminals 12 to 18 AWG
  • Field Selectable Temporal 3 or Continuous Tone
  • Horn Piezo Frequency 3100Hz (nominal)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Control Module (Must Use AVS44)
  • Silence Horn While Strobes Remain Flashing
  • Field Selectable 2 or 4 Wire Operation Shipped from the Factory as 2 Wire
  • Faceplate available in Red or Off-White
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please