You are here: Home > Shop Brands > Gentex Corp. > Fire Protection > Audible/Visual Signaling Appliances > Outdoor Commander Series Evacuation Signals
We found 20 results matching your criteria.
Sort By:
Page of 2
Gentex Corp 9041205 24 Volt Outdoor Low Profile Evacuation Horn, Red Gentex Corp 9041205 Low Profile Evacuation Horn 24VDC Red
The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  • The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5” high x 4.5” wide x 2.5” deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041205 Low Profile Evacuation Horn, 24VDC, Red Gentex Corp 9041207 24 Volt Outdoor Low Profile Evacuation Horn, White
    The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5” high x 4.5” wide x 2.5” deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

    The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

    The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041207 Low Profile Evacuation Horn, 24VDC White Gentex Corp 9041207 Low Profile Evacuation Horn, 24VDC, White
    The Commander3 Series is a low profile strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela.

    The Commander3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander3 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

  • Nominal Voltage 12 & 24 VDC
  • 24 VDC units have field selectable candela options of 15, 30, 60, 75, and 110 candela
  • 12 VDC units have field selectable candela options of 15, 30, 60, and 75 candela
  • GEH horn is available in 12 or 24 Volt
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Unit Dimensions: 5” high x 4.5” wide x 2.5” deep
  • Synchronize Strobe and/or Horn with Gentex Series Control Module (12 Volt product must use the AVSM Module)
  • Prewire Entire System, Then Install Your Signals
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Tamperproof Re-entrant Grill Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 8-17.5 VDC (12 Volt Models) 16-33 VDC or FWR (24 Volt Models)
  • Faceplate Available in Red or Off-White
  • The Commander2 Series is a low profile strobe, horn or horn/strobe combination that offers dependable audible and audible/visual alarms and the lowest current available. The GE Series is available in fixed candela options of 15, 30, 60, 75, 110, 177 and 15/75.

    The Commander2 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime as well as a whoop tone. All tones are easy for the professional to change in the field by using switches.

    The GE Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander2 Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The Commander2 Series also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The GE Series appliances are UL 464 and UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24 VDC (12 VDC available on GEH)
  • Fixed Candela Options of 15, 30, 60, 75, 110, 177 and 15/75
  • Unit Dimensions: 5” high x 4.5” wide x 2.5” deep
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Synchronize Strobe and/or Horn by Using the Gentex Synchronization Module (12 VDC product must use the AVSM Module)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041217 Outdoor Low Profile Evacuation Horn/Strobe, 75 Candela, 24VDC, Wall-Mount, Red Gentex Corp 9041218 Outdoor Low Profile Evacuation Horn/Strobe, 75 Candela, 24VDC, Wall-Mount, White
    The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

    The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

    The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  • The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

    The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

    The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041219 Outdoor Low Profile Evacuation Strobe, 75 Candela, 24VDC, Red Gentex Corp 9041220 Outdoor Low Profile Evacuation Strobe, 75 Candela, 24VDC, White
    The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

    The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

    The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  • The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

    The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

    The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041245 Outdoor Low Profile Evacuation Horn/Strobe, 75 Candela, 24VDC, Wall-Mount, No Lettering, Red Gentex Corp 9041246 Outdoor Low Profile Evacuation Horn/Strobe, 75 Candela, 24VDC, Wall-Mount, No Lettering, White
    The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

    The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

    The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  • The Outdoor Commander Series offers dependable visible and/or audible alarms for all outdoor needs. Included with the WGE Series is the GOE or GOELP outdoor enclosure. The enclosure is made of high quality Lexan material, providing protection from weather related conditions and allowing the necessary full candela output. This highly constructed enclosure meets various installation requirements including deterring moisture from entering the enclosures.

    The Outdoor Series is equipped with the 4” mounting plate which incorporates the Super-Slide™ feature that allowes the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

    The WGE Series also features the Checkmate™ - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal. The WGE Series strobe has a minimal operation current and has a minimum flash rate of 1Hz and can vary up to 2Hz regardless of input voltage.

    The WGE Series appliances are UL 464 and UL 1638 listed for use with fire protective systems and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage 24VDC
  • Unit is Shipped with UL1638 listed WGES24-75 Candela Strobe or WGEC24-75 Candela Horn/Strobe
  • Unit Dimensions: GOE 5.75” High x 4.75” Wide x 4.18” Deep GOELP 5.75” High x 4.75” Wide x 3.25” Deep
  • To Obtain Outdoor Horn, Must Order GEH24 and GOE/GOELP Separately
  • Super-SlideTM - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Lower Installation and Operating Costs
  • Switch Selection for High dBA
  • Switch for Mechanical and 2400Hz Tone
  • Switch for Continuous Tone
  • Tamperproof Re-entrant Grill
  • Wide Voltage Range 16-33 VDC or FWR
  • Separate Horn and Strobe Functions
  • Synchronize Strobe and/or Horn by Using Gentex Synchronization Control Module
  • Listed for UL1638 when used with the GOE or GOELP enclosure
  • GOE/GOELP Made of Clear Lexan - Provides Maximum Visibility and Reliability for effective Visible Signaling - Allowing Full 75cd Output
  • Input Terminals 12 to 18 AWG
  • Faceplate Available in Red or Off-White
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please