You are here: Home > Shop Brands > Gentex Corp. > Fire Protection > Audible/Visual Signaling Appliances > Commander3 Colored Lens Series Emergency Notification Evacuation Signals
We found 26 results matching your criteria.
Sort By:
Page of 3
Gentex Corp 9041327 Emergency Notification Evacuation Horn/Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Amber Lens Gentex Corp 9041328 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, White Faceplate, Amber Lens
The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041329 Emergency Notification Evacuation Horn/Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Blue Lens Gentex Corp 9041330 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, White Faceplate, Blue Lens
    The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041331 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Green Lens Gentex Corp 9041332 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, White Faceplate, Green Lens
    The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041333 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Red Lens Gentex Corp 9041334 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, White Faceplate, Red Lens
    The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041335 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Amber Lens Gentex Corp 9041336 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, White Faceplate, Amber Lens
    The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041337 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Blue Lens Gentex Corp 9041338 Emergency Notification Evacuation Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, White Faceplate, Blue Lens
    The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5 high x 4.5 wide x 2.5 deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please