|
|
|
|
|
|
|
|
|
|
The GX91/GX93 Series mini-horn is a high quality remote signaling appliance that offers dependable remote annunciation. The GX91/GX93 is listed for use with both filtered and unfiltered power. The GX91 is a continuous tone mini horn. This unit is not synchable with the AVS Series Control Module. It is however synchable from the panel. With the GX93 a jumper is provided to select either the continuous tone or the temporal 3 evacuation tone. The GX93 can be used on the same sync circuit (AVS Series Control Module) as other Gentex signals. The GX91/GX93 appliances are UL 464 listed for use with fire protective systems and are warranted for three years from the date of purchase. Features Single Unit is capable of 12 or 24 VDC determined by the input voltage Unit Dimensions: 4.48” High x 2.84” Wide x 0.5” Deep Jumper Selectable Temporal 3 or Continuous Tone on the GX93. GX91 has a Continuous Tone horn only Horn Frequency is 3100Hz Terminal Blocks (12 AWG to 18 AWG) Low Current Consumption Variety of Mounting Options for New Construction and Retrofit Applications To Synchronize the GX93 use the Gentex AVS Series Control Module (see Technical Bulletin 015) UL 464 Listed for Fire Protective Service Textured Finish High Impact Plastic Faceplate, Available in Fire Alarm Red or Off-White
|
The GX91/GX93 Series mini-horn is a high quality remote signaling appliance that offers dependable remote annunciation. The GX91/GX93 is listed for use with both filtered and unfiltered power. The GX91 is a continuous tone mini horn. This unit is not synchable with the AVS Series Control Module. It is however synchable from the panel. With the GX93 a jumper is provided to select either the continuous tone or the temporal 3 evacuation tone. The GX93 can be used on the same sync circuit (AVS Series Control Module) as other Gentex signals. The GX91/GX93 appliances are UL 464 listed for use with fire protective systems and are warranted for three years from the date of purchase. Features Single Unit is capable of 12 or 24 VDC determined by the input voltage Unit Dimensions: 4.48” High x 2.84” Wide x 0.5” Deep Jumper Selectable Temporal 3 or Continuous Tone on the GX93. GX91 has a Continuous Tone horn only Horn Frequency is 3100Hz Terminal Blocks (12 AWG to 18 AWG) Low Current Consumption Variety of Mounting Options for New Construction and Retrofit Applications To Synchronize the GX93 use the Gentex AVS Series Control Module (see Technical Bulletin 015) UL 464 Listed for Fire Protective Service Textured Finish High Impact Plastic Faceplate, Available in Fire Alarm Red or Off-White
|
|
|
|
|
|
|
|
|
|
|
|
|
The GX91/GX93 Series mini-horn is a high quality remote signaling appliance that offers dependable remote annunciation. The GX91/GX93 is listed for use with both filtered and unfiltered power. The GX91 is a continuous tone mini horn. This unit is not synchable with the AVS Series Control Module. It is however synchable from the panel. With the GX93 a jumper is provided to select either the continuous tone or the temporal 3 evacuation tone. The GX93 can be used on the same sync circuit (AVS Series Control Module) as other Gentex signals. The GX91/GX93 appliances are UL 464 listed for use with fire protective systems and are warranted for three years from the date of purchase. Features Single Unit is capable of 12 or 24 VDC determined by the input voltage Unit Dimensions: 4.48” High x 2.84” Wide x 0.5” Deep Jumper Selectable Temporal 3 or Continuous Tone on the GX93. GX91 has a Continuous Tone horn only Horn Frequency is 3100Hz Terminal Blocks (12 AWG to 18 AWG) Low Current Consumption Variety of Mounting Options for New Construction and Retrofit Applications To Synchronize the GX93 use the Gentex AVS Series Control Module (see Technical Bulletin 015) UL 464 Listed for Fire Protective Service Textured Finish High Impact Plastic Faceplate, Available in Fire Alarm Red or Off-White
|
The GX91/GX93 Series mini-horn is a high quality remote signaling appliance that offers dependable remote annunciation. The GX91/GX93 is listed for use with both filtered and unfiltered power. The GX91 is a continuous tone mini horn. This unit is not synchable with the AVS Series Control Module. It is however synchable from the panel. With the GX93 a jumper is provided to select either the continuous tone or the temporal 3 evacuation tone. The GX93 can be used on the same sync circuit (AVS Series Control Module) as other Gentex signals. The GX91/GX93 appliances are UL 464 listed for use with fire protective systems and are warranted for three years from the date of purchase. Features Single Unit is capable of 12 or 24 VDC determined by the input voltage Unit Dimensions: 4.48” High x 2.84” Wide x 0.5” Deep Jumper Selectable Temporal 3 or Continuous Tone on the GX93. GX91 has a Continuous Tone horn only Horn Frequency is 3100Hz Terminal Blocks (12 AWG to 18 AWG) Low Current Consumption Variety of Mounting Options for New Construction and Retrofit Applications To Synchronize the GX93 use the Gentex AVS Series Control Module (see Technical Bulletin 015) UL 464 Listed for Fire Protective Service Textured Finish High Impact Plastic Faceplate, Available in Fire Alarm Red or Off-White
|
|
|
|
|
|
|
|
|
|
|
|
|
The GX91/GX93 Series mini-horn is a high quality remote signaling appliance that offers dependable remote annunciation. The GX91/GX93 is listed for use with both filtered and unfiltered power. The GX91 is a continuous tone mini horn. This unit is not synchable with the AVS Series Control Module. It is however synchable from the panel. With the GX93 a jumper is provided to select either the continuous tone or the temporal 3 evacuation tone. The GX93 can be used on the same sync circuit (AVS Series Control Module) as other Gentex signals. The GX91/GX93 appliances are UL 464 listed for use with fire protective systems and are warranted for three years from the date of purchase. Features Single Unit is capable of 12 or 24 VDC determined by the input voltage Unit Dimensions: 4.48” High x 2.84” Wide x 0.5” Deep Jumper Selectable Temporal 3 or Continuous Tone on the GX93. GX91 has a Continuous Tone horn only Horn Frequency is 3100Hz Terminal Blocks (12 AWG to 18 AWG) Low Current Consumption Variety of Mounting Options for New Construction and Retrofit Applications To Synchronize the GX93 use the Gentex AVS Series Control Module (see Technical Bulletin 015) UL 464 Listed for Fire Protective Service Textured Finish High Impact Plastic Faceplate, Available in Fire Alarm Red or Off-White
|
The GX91/GX93 Series mini-horn is a high quality remote signaling appliance that offers dependable remote annunciation. The GX91/GX93 is listed for use with both filtered and unfiltered power. The GX91 is a continuous tone mini horn. This unit is not synchable with the AVS Series Control Module. It is however synchable from the panel. With the GX93 a jumper is provided to select either the continuous tone or the temporal 3 evacuation tone. The GX93 can be used on the same sync circuit (AVS Series Control Module) as other Gentex signals. The GX91/GX93 appliances are UL 464 listed for use with fire protective systems and are warranted for three years from the date of purchase. Features Single Unit is capable of 12 or 24 VDC determined by the input voltage Unit Dimensions: 4.48” High x 2.84” Wide x 0.5” Deep Jumper Selectable Temporal 3 or Continuous Tone on the GX93. GX91 has a Continuous Tone horn only Horn Frequency is 3100Hz Terminal Blocks (12 AWG to 18 AWG) Low Current Consumption Variety of Mounting Options for New Construction and Retrofit Applications To Synchronize the GX93 use the Gentex AVS Series Control Module (see Technical Bulletin 015) UL 464 Listed for Fire Protective Service Textured Finish High Impact Plastic Faceplate, Available in Fire Alarm Red or Off-White
|
|
|
|
|
|
|
|
|
|
|
|
|
The GX91/GX93 Series mini-horn is a high quality remote signaling appliance that offers dependable remote annunciation. The GX91/GX93 is listed for use with both filtered and unfiltered power. The GX91 is a continuous tone mini horn. This unit is not synchable with the AVS Series Control Module. It is however synchable from the panel. With the GX93 a jumper is provided to select either the continuous tone or the temporal 3 evacuation tone. The GX93 can be used on the same sync circuit (AVS Series Control Module) as other Gentex signals. The GX91/GX93 appliances are UL 464 listed for use with fire protective systems and are warranted for three years from the date of purchase. Features Single Unit is capable of 12 or 24 VDC determined by the input voltage Unit Dimensions: 4.48” High x 2.84” Wide x 0.5” Deep Jumper Selectable Temporal 3 or Continuous Tone on the GX93. GX91 has a Continuous Tone horn only Horn Frequency is 3100Hz Terminal Blocks (12 AWG to 18 AWG) Low Current Consumption Variety of Mounting Options for New Construction and Retrofit Applications To Synchronize the GX93 use the Gentex AVS Series Control Module (see Technical Bulletin 015) UL 464 Listed for Fire Protective Service Textured Finish High Impact Plastic Faceplate, Available in Fire Alarm Red or Off-White
|
NC-N1000IIIX Access Control Panel - NC-N1000IIIX
|
|
|
|
|
|
|
|
|
|
NC-N1000K4X Control Panel Kit(Incl.Exp Cntrllr In Encl,S4,X4) - NC-N1000K4X
Versatility, reliability and expandability are the three main features that make the N-1000 the most popular access control panel ever
Another key feature of the N-1000 is its completely distributed database. All card information, time zone information, relay control information and alarm point information is loaded into the N-1000’s memory. The unit can operate completely stand alone without dependence on any other equipment
The most important feature of any access control system is the ability to be expanded. The N-1000 will operate as a stand alone two or four door controller, and as needs increase, up to 31 N-1000's may be connected on an RS485 drop-line
Using WIN-PAKTM access control software, a total system is achieved by having each drop-line connected to a communication port, modem or ethernet terminal server
N-1000 is designed to operate off-line, making access control decisions independently from a PC or other controlling device. It can also be connected to a host computer for system configuration, alarm monitoring and direct control. Connectivity to the host computer is accomplished via direct serial communication (RS232 or RS485), dial-up modem or TCP/IP network connection
The N-1000-IV-X allows for a card database of 25,000 cards and a transaction buffer capable of storing 6,600 transactions
|
|
|
