You are here: Home > Shop Brands > Locknetics > Software Managed Access Systems
We found 101 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Software Managed Access Systems

  Computer Managed Locking Systems
  LockLink Express Software
  Offline Battery Powered Access Control Systems
  Offline Hardwired Access Control Systems
  VIP Open Architecture
  Wireless Access Products
Computer Managed Locking Systems
LockLink Express Software
Offline Battery Powered Access Control Systems
Offline Hardwired Access Control Systems
VIP Open Architecture
Schlage offers you another outstanding, cost-effective security platform that combines the finest in Mechanical Hardware with the ability to monitor door openings with your EXISTING Access Control Panel and Software! The VIP Open Architecture Platform sea
Wireless Access Products
A line of wireless Access Point Modules for access control solutions and applications.
Sort By:
Page of 9
3M Macurco GD-21 Combustible Gas Detector Macurco CM-S1 Fixed Carbon Monoxide Detector for Fire & Security Systems UL Listed
Special Order Item Macurco GD Series is built to order by Macurco, the lead time is 10 business days
General Information
The GD-21 is a 120VAC plug in type unit, with a self-contained alarm. The standard calibration is to 25% of LEL (Lower Explosive Level) of a mixture of Methane (natural gas) and air. The GD-21 will alarm at about 25% of LEL of Propane, Butane and LP Gas.

To detect the complete list of gases on the data sheet will normally require a special calibration, for a nominal charge. However, the following gases can be detected with the standard calibration: Acetylene, Gasoline fumes and Lacquer thinners. See the GD-21 data sheet for a list of other gases that can be detected, and other technical information.

Location
The unit on average can cover about 900 sq. ft. The coverage depends on air movement in the room or facility. Locate the unit high if the gas of concern is lighter than air, such as natural gas (methane). If the gas of concern is heavier than air; such as butane, propane, alcohols or gasoline; mount the detector relatively low. Extra detectors may be needed near any areas were people work or the air is stagnant.

The location selected should not be near a corner, as this can be dead air space. The location selected must also have a 120 VAC power outlet within nine feet. It is not suggested to locate gas detectors in kitchens or bathrooms, because of frequent unwanted alarms due to the normal use in those rooms of products containing combustible gases.

Features
  • Detects many combustible gases: Natural Gas, LP, Propane, Butane, and Gasoline Fumes.
  • Standard Calibration setting is 25% of LEL (Lower Explosive Limit) for natural gas.
  • Loud 85 dB Alarm (similar to a smoke alarm buzzer) wakes even heavy sleepers
  • Stand Alone Unit: Plug into any 120 VAC power outlet.
  • Ignition protected: Explosion Proof Design.
  • Maintenance free electronic sensor, supervised.
  • Small, compact, attractive white case.
  • Easy to install: Just hang unit on a screw or nail, and plug it in.
  • Special calibrations are available.

    Specifications
  • POWER: 120 VAC, 60 Hz
  • CURRENT: Less than 10 watts
  • SHIPPING WEIGHT: 1 lb
  • COLOR: White
  • ALARM SOUND: 88 dB @ 10 ft
  • ALARM SET POINT: 25% of LEL natural gas
  • SENSOR MAINTENANCE: none
  • SENSOR LIFE: 7 – 10 years
  • SIZE: 4Ό x 3½ x 1Ύ inches
  • Carbon monoxide fixed gas detector CM-S1 offers flush or surface mount options, 12-24 VDC operation, N.O. or N.C. alarm relay, visual display, and 85db buzzer. CM-S1 is MEA-approved and UL Listed to UL 2075.

    UL Listed to UL 2075 for use with systems. Flush mount, 12-24 VDC operation, N.O. or N.C. alarm relay, visual display, 85db Buzzer.

    CM-S1
    • SPDT alarm relay
    • LED for operating status
    • 12-24 VDC Power
    • Flush or surface mount
    • Long life sensor
    • All units individually calibrated

    FEATURES
    • Listed to UL Standard 2075 for carbon monoxide detectors.
    • Tested to UL Standard 2034 for carbon monoxide detectors.
    • Surface mounts to a wall using the supplied enclosure rear housing.
    • Flush mounts in a 2 X 4 (1-1/2 inch deep minimum ) single gang switch, or handy electrical box.
    • Small, low profile, attractive unit in a white plastic case.
    • Detector alarms at multiple levels of exposure to carbon monoxide based on time weighted averages of the gas present.
    • Inexpensive, easy to install. Microcomputer control allows mostly automatic operation.
    • Test & Reset switch conducts internal tests and actuates alarm relay.
    • Visual display: GREEN - Normal operation. FLASHING AMBER - Trouble Contact your installer or Macurco Tech Support RED - Danger! Move to fresh air (hazardous condition is present.)
    • Solid state sensor. No maintenance or periodic sensor replacement needed.
    • SPDT Relay to connect to Alarm Control Panels or switch external alarm devices.
    • Buzzer: Produces repeating loud tone bursts during alarm, and chirps if sensor trouble is found.

    Designed for residential and commercial use, the Macurco CM-S1 delivers unparalleled ease of installation with a simple three-step Speed Mount™ system and compatibility with both 12-volt security systems and 24-volt fire alarm systems. At Macurco, it’s simply the latest round of innovations that have made us the leader in our industry since 1972. When you turn to Macurco, you get the expertise of industry pioneers who have helped change the face of fixed gas detection and ventilation control equipment. Add the CM-S1, and you’ve added serious technology from visionaries collaborating under one roof to design, manufacture, test and distribute Macurco innovations. A phone call to Macurco is a direct line to engineers, assembly technicians and testing professionals who are ready to assist you to make your project a success. We manufacture all our units to strict quality standards. Each is 100 percent assembled, calibrated and tested from our headquarters in the greater Denver area. Today, Macurco supplies the finest gas detection devices to a range of industries, including Fire & Security, HVAC, Propane, Alternative Fuel and Telecommunications, for the most important projects anywhere. Namely, yours.

    Macurco CMP 12 VAC Transformer for GD2A Gas Detector Trendmet 9VDC800 Optional Power Adapter For TK-400/200/210/401R
    Macurco CMP 12V Transformer for GD2A Gas Detector TRENDNET 9VDC800 Optional Power Adapter for TK-400/200/210/401R

    Trendmet TBW101UB Wireless Bluetooth USB Adapter Trendmet TBW104UB High Power, Long Range Bluetooth USB Adapter
    TRENDNET TBW101UB Wireless Bluetooth USB Adapter


    Venture into the wireless realm with TRENDnet Bluetooth technology. Enhance your PCs with Bluetooth peripherals. Unclutter your workspace with TRENDnet?s TBW-101UB Bluetooth wireless technology.

    TRENDNET TBW104UB High Power, Long Range Bluetooth USB Adapter


    The USB 2.0 Bluetooth Adapter allows you to make wireless short-range connections between your computer and Bluetooth-enabled devices. This Bluetooth v2.0 utilizes Enhanced Data Rate (EDR) to allow for data rates up to 3Mbps. The Bluetooth adapter can easily connect to your Bluetooth-enabled devices from up to 100 meters away.

    Trendmet TBW105UB Wireless Bluetooth USB Adapter Trendmet TBW106UB Micro Bluetooth USB Adapter (100M)
    TRENDNET TBW105UB Wireless Bluetooth USB Adapter


    The USB 2.0 Bluetooth Adapter allows you to make short-range wireless connections between your computer and Bluetooth-enabled devices. This Bluetooth v2.0 utilizes Enhanced Data Rate (EDR) to allow for data rates up to 3Mbps. The Bluetooth adapter can easily connect to your Bluetooth-enabled devices from up to 10 meters away.

    TRENDNET TBW106UB Micro Bluetooth USB Adapter (100M)


    The Micro Bluetooth USB Adapter (Model TBW-106UB) networks Bluetooth enabled devices such as cell phones, keyboards and headsets.

    Trendmet TCCT68 RJ-11/RJ-45 Crimp/Cut/Strip Tool Trendmet TCNT2 Network Cable Tester (TP & Coax)
    TRENDNET TCCT68 RJ-11/RJ-45 Crimp/Cut/Strip Tool


    For your variety of network needs, TRENDnet has a tool specifically designed to maintain network accessories. Our professional crimp tool TC-CT68 crimps, strips, and cuts cable for 8 and 6 position modular plugs. The crimp tool offers reliable, easy-to-use, and affordable solution to meet immediate cutting needs. Our professional crimp tool delivers convenience at a very economical price.

    TRENDNET TCNT2 Network Cable Tester (TP & Coax)


    The TC-NT2 is a convenient and comprehensive cable tester for network professionals. Its powerful and user-friendly features enable network installers to accurately check pin configurations of various voice and data communication cables. The TC-NT2 includes a master unit that transmits test signals to its corresponding remote terminator to verify cable reliability. It checks continuity and displays wiring configuration up to 300 meters of cable installation. With the unique feature of the audio tone generator, the TC-NT2 identifies and troubleshoots faulty cables to assure proper pin and wiring structure.

    Trendmet TCNTUF USB & Firewire Adapter For TC-NT2 Trendmet TCP16C5E Cat5/5e 16-Port Unshielded Patch Panel
    TRENDNET TCNTUF USB & Firewire adapter for TC-NT2

    TRENDNET TCP16C5E Cat5/5e 16-port Unshielded Patch Panel


    Prepare yourself for Copper Gigabit Ethernet with TRENDnet?s CAT 5e RJ-45 UTP Patch Panels. These patch panels are certified 350Mhz CAT 5e, which are necessary for Copper Gigabit Ethernet. TRENDnet?s 16-port 350Mhz enhanced CAT 5 Patch Panels are ideal for Ethernet/Fast Ethernet/Gigabit Ethernet (1000Base-T) network applications. Using TRENDnet?s CAT 5e now, will prepare you for more bandwidth in the future without re-cabling your network.

       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please