You are here: Home > Shop Brands > Gentex Corp. > Fire Protection > Audible/Visual Signaling Appliances > Photoelectric Single Station Smoke Alarm
We found 13 results matching your criteria.
Sort By:
Page of 2
Gentex Corp 9170001 Photoelectric Single Station Smoke Alarm, Tandem Up to 12 Units, Backup Battery Gentex Corp 9170002 Photoelectric Single Station Smoke Alarm, Integral 135F Thermal, Tandem Up to 12 Units, Backup Battery
The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercia/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • Gentex Corp 9170003 Photoelectric Single Station Smoke Alarm, Isolated 135F Thermal, Tandem Up to 12 Units, Backup Battery Gentex Corp 9170004 Photoelectric Single Station Smoke Alarm, Tandem Up to 6 Units,  Backup Battery
    The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • Gentex Corp 9170005 Photoelectric Single Station Smoke Alarm, Isolated 135F Thermal, Tandem Up to 6 Units,  Backup Battery Gentex Corp 9170009 Photoelectric Single Station Smoke Alarm, Integral 135F Thermal, Tandem Up to 6 Units,  Backup Battery
    The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • Gentex Corp 9170012 Photoelectric Single Station Smoke Alarm, Temporal 3 Piezo Sounder, 220VAC, Tandem Up to 12 Units,  Backup Battery Gentex Corp 9170013 Photoelectric Single Station Smoke Alarm, Temporal 3 Piezo Sounder, 220VAC, Integral 135F Thermal, Tandem Up to 12 Units,  Backup Battery
    The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • Gentex Corp 9170014 Photoelectric Single Station Smoke Alarm, Temporal 3 Piezo Sounder, 220VAC, Isolated 135F Thermal, Tandem Up to 12 Units,  Backup Battery Gentex Corp 9170015 Photoelectric Single Station Smoke Alarm, Temporal 3 Piezo Sounder, 220VAC, Tandem Up to 6 Units,  Backup Battery
    The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • Gentex Corp 9170016 Photoelectric Single Station Smoke Alarm, Temporal 3 Piezo Sounder, 220VAC, Isolated 135F Thermal, Tandem Up to 6 Units,  Backup Battery Gentex Corp 9170026 Photoelectric Single Station Smoke Alarm, 220VAC, Tandem Up to 12 Units,  Backup Battery
    The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  • The 9000/9003 Series of photoelectric smoke alarms is designed for residential applications and commercial/residential, including homes, apartments, hospitals, hotels and motels, in compliance with UL 217, applicable IBC/IFC Standards and NFPA 72.

    Available in many different models, the 9120/9123 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9000/9003 Series is provided with a 9 VDC alkaline battery for backup in the event building power is lost. The battery impedance is verified and the detector provides a low or missing battery warning.

    The Gentex 9000/9003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72 and UL Standards. Options include self-restoring 135F integral or isolated heat thermals and Form A/Form C dry contacts for remote annunciation.

    Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on F models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

    The 9003 Series provides the temporal 3 evacuation tone as a standard feature. When testing the 9123 Series it may take up to 16 seconds longer to go in or out of alarm.

    Features
  • Available in 120VAC and 220VAC with 9VDC Battery Back-Up
  • Horn Frequency 3100 Hz (Nominal)
  • Nominal 2.5% Sensitivity
  • Patented Three Position Test Switch
  • On-Site Maintenance Washing Program
  • Relays Operate on Battery Back-Up
  • Quick-Disconnect Wiring Harness
  • 90dBA Solid-State Piezo Horn
  • Temporal 3 Evacuation Sounding Device (9123 Series)
  • 5-to-1 Signal-to-Noise Ratio
  • Pulsing LED Sensing Chamber
  • Fully Insect Screened
  • Red LED pulses every 30 seconds, green LED for AC power on
  • Mounting Hardware Adapts to Standard Junction Boxes
  • Dust Cover to Prevent Contamination During Installation
  • Low or Missing Battery Indicator
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please