You are here: Home > Shop Brands > Camden Door Controls > Door Activation Devices > Key Switches > Single Gang, Flush
We found 27 results matching your criteria.
Sort By:
Page of 3
Camden CM-1100 Flush Mount Key Switch, SPST Momentary N/O Camden CM-1120 Flush Mount Key Switch Control - SPDT Momentary

Flush Mount Key Switch, SPST Momentary N/O

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments. The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

Features:
  • Single gang and narrow style models
  • Accepts standard mortise cylinders, 1" 1 1⁄4 "
  • Heavy duty 1⁄4 " thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • No set screws required
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 OR 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes engraving available
  • Optional led indicators
  • Fast & easy to install
  • Optional 1-60 second DPST pneumatic time delay

Flush Mount Key Switch Control - SPDT Momentary

CAMDEN MANUFACTURING, CM-1100 Series of flush mount switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄4 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

The CM-1100 flush mount faceplate accepts one or two switches, and has a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is not included, but is available from Camden Manufacturing.) The design and construction makes it ideal for all weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

FITS STANDARD SINGLE GANG BOXES
ACCEPTS STANDARD MORTISE CYLINDERS, 1" 1 1⁄4 "
HEAVY DUTY 1⁄4 " THICK ALUMINUM PLATE
1 PIECE DIE CAST CONSTRUCTION
LOCATORS PREVENT CYLINDER FROM SPINNING
NO SET SCREWS REQUIRED
VANDAL RESISTANT
CYLINDER SITS FLUSH TO FACEPLATE
TAMPER PROOF SCREWS PROVIDED
INDOOR OR OUTDOOR APPLICATIONS
UL/CSA APPROVED SWITCHES
1 OR 2 SWITCHES MAY BE INSTALLED
LEFT AND/OR RIGHT OPERATION
WIDE RANGE OF SWITCH CONFIGURATIONS
COLOR CODED 18 AWG SOLDERED LEADS
HEAT SHRINK PROTECTIVE SLEEVE OVER CONTACTS
CASTED CENTRE RIB PROTECTS SWITCHES FROM DAMAGE
BRUSHED ALUMINUM FINISH
CUSTOM COLOR FINISHES & ENGRAVING AVAILABLE
OPTIONAL LED INDICATORS
FAST & EASY TO INSTALL
OPTIONAL 1-60 SECOND PNEUMATIC TIME DELAY
Camden Marketing 11107112 Flush Mount Key Switch SPST Maintained with Green 12V LED Camden Marketing CM-110010721 Aluminum Plate for Mortise 2 LEDs
Camden Marketing 11107112 flush mount key switch SPST maintained with green 12V LED

Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden product 110010721 is an aluminum plate for mortise 2 LEDs.

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden Marketing CM-11007112 Flush Mount Key Swich, SPST Momentary, N/O with 12V Green LED Camden Marketing CM-11007212 Flush Mount Key Switch, SPST Momentary, N/O Red and Green 12V LEDs.
    Camden Marketing 11007112 Flush Mount Key Swich, SPST Momentary, N/O with 12V Green LED

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden Marketing 11007212 Flush Mount Key Switch, SPST Momentary, N/O Red and Green 12V LEDs.

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden Marketing CM-1110 Flush Mount Key Switch, SPST Maintained Camden Marketing CM-11207112 Keyswitch SPDT Momentary Green 12V LED
    Camden product 1110 is a flush mount key switch, SPST maintained

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden product 11207112 Keyswitch SPDT Momentary Green 12V LED

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden Marketing CM-11207212 Flush Mount Key Switch, SPDT Momentary Red and Green 12V LEDs Camden Marketing CM-1130 Flush Mount Key Switch SPDT Maintained
    Camden product 11207212 Flush mount key switch, SPDT momentary, red and green 12V LEDs mounted on faceplate

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden product 1130 flush mount key switch SPDT maintained

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden Marketing CM-11307012 Flush Mount Key Switch SPDT Maintained Red 12V LED Camden Marketing CM-11307212 Flush Mount Key Switch SPDT Maintained Red and Green 12V LEDs
    Camden product 11307012 flush mount key switch SPDT maintained, red 12V LED mounted on faceplate

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  • Camden product 11307212 flush mount key switch SPDT maintained, red and green 12V LEDs mounted on faceplate

    Single Gang, Flush

  • Fits standard single gang boxes
  • Accepts standard mortise cylinders (1" - 1 1/4")
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided (No set screw required)
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes and engraving available
  • Optional LED indicators
  • Optional 1-60 second pneumatic time delay.

    *Picture shown is with optional LED

  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please