You are here: Home > Shop Brands > Locknetics > Power Supplies, Monitoring Devices & Accessories > Monitoring Stations
We found 30 results matching your criteria.
Sort By:
Page of 3
Fire-Lite CMF300 Control Module Fire-Lite DP-51050: Optional dress panel
The CMF-300 and CRF-300 Addressable Control Modules are used with Fire•Lite's Addressable Fire Alarm Control Panels. These addressable control modules provide Notification Appliance Circuits (CMF-300) and Form-C Output Relay (CRF-300).

The CMF-300 Addressable Control Module provides Fire-Lite Alarm's MS-9200 and MS-9600 intelligent control panels.

DP-51050: Optional dress panel. Restricts access to the system wiring while allowing access to the membrane switch panel.
Fire-Lite MRP-4424 (C/E) 4-Zone, 24 VDC Agent Releasing Panel Fire-Lite UDACT-F Universal DACT
The MRP-4424(C/E) is a 24-volt, Agent Release Control Panel. Compact and cost-effective, the MRP-4424 is powerful, offering a variety of options designed to meet most low-end releasing applications. (C)= Canadian The Fire•Lite UDACT-F Universal Digital Alarm Communicator Transmitter may be used on the MS-9200, MS-9600 and Sensiscan 2000 Fire Alarm Control Panels (FACPs). The UDACT-F transmits system status to UL listed Central Station Receivers via the public switched telephone network. The UDACT-F is compact in size and may be mounted inside the host control panel or may mount externally in a separate cabinet. EIA-485 annunciator communications bus and regulated 24-volt connections are required. The UDACT-F transmits 198 points or 56 zones when connected to the MS-9200, up to 636 points or 98 zones when connected to the MS-9600, and 56 zones when connected to the Sensiscan 2000.
FireLite DP-9692 DRESS PANEL FOR 9600LS AND 9200UDLS FireLite MS-9200UD 198-Point Intelligent Control
DP9692 DRESS PANEL FOR 9600LS AND 9200UDLS REPLACES FL-MS9200

MS-9200UD 198-Point Intelligent Addressable Fire Alarm Control Panel w/ Built-In Communicator

GENERAL INFORMATION
The Fire•Lite MS-9200UD is a compact, cost-effective, intelligent addressable fire alarm control panel with a built-in communicator, remote site upload/download capability and a capacity of 198 addressable Fire•Lite devices on one loop. The Signaling Line Circuit (SLC) loop supports up to 99 smoke detectors and 99 control, relay or a variety of monitor modules. The panel is designed for ease of installation and programming. It features the latest in advanced fire protection technology, including detector sensitivity testing with printable results, system auto-programming, maintenance alert, automatic detector test and drift compensation, and selectable strobe synchronization.
The built-in communicator is compatible with 14 different formats, including the popular Ademco Contact ID, allowing the reporting of addressable point and software zone status.

FEATURES

  • Built-In Communicator Transmitter.
  • Remote Site Upload/Download Capability.
  • Auto-program (learn mode) reduces installation time.
  • One Signaling Line Circuit (SLC) supports up to 198 addressable devices (99 detectors and 99 control, relay or a variety of monitor modules), including the new addressable heat detector, duct detector and dual monitor module.
  • SLC loop maximum length is 10,000 ft. (3,048 m) @ 12 AWG (3.25 mm2) of twisted, shielded wire, 3,000 ft. of untwisted, unshielded wire.
  • Four onboard Notification Appliance Circuits (NAC’s) with additional NAC capability using the CMF-300 output control module.
  • Selectable strobe synchronization per NAC.
  • 3.0 amps of power standard, expandable to 6.0 amps
  • Fully programmable from the local keypad, local PS-2 keyboard or
  • PC via PK-Plus Windows utility.
  • Two programmable Form-C relay outputs.
  • 99 software zones for a variety of applications.
  • FireLite MS-9600 636-Point Intelligent Control with optional DACT-UD FireLite SLC-2: Optional expander module, enables second SLC loop.
    Intelligent Addressable FACP with Optional 2nd Loop The Fire•Lite MS-9600 is a compact, cost-effective, intelligent addressable fire alarm control panel with a capacity of 318 addressable Fire•Lite devices on one Signaling Line Circuit (SLC) or a total of 636 addressable points with an optional second loop (SLC-2). An optional 14.4K Baud modem (DACT-UD) is available for remote site upload/download and/or remote monitoring. Each Signaling Line Circuit (SLC) loop supports up to 159 addressable detectors including photoelectric, photoelectric with heat, ionization, photoelectric duct, fixed heat, fixed heat with rate-of-rise, and fixed high-heat detectors. It also supports up to 159 addressable modules including monitor (twowire detector, normally open devices), dual-monitor functions (two monitor circuits from one module, two addresses used), control (for Notification Appliance Circuits), and relay (two Form-C) modules. The panel uses surface-mount technology and is designed for ease of installation, programming, and maintenance. It features the latest in advanced fire protection technology, including maintenance alert and automatic detector test functions. SLC-2: Optional expander module, enables second SLC loop.
    Honeywell V4000 - Remote Video System for Central Station Monitoring Safety Technology Inc. SS-2374 Stopper Station, White, Momentary Mushroom, with Mini Stopper II Cover with Spacer
    Honeywell’s V4000 Remote Video System is a cost effective, powerful, integrated video solution for residential and commercial applications. The system is designed to capture vital video images and transmit them over standard phone lines. The V4000 can be seamlessly integrated with Honeywell’s ADEMCO control panels.

    The V4000’s Video Alarm Verification features are designed to help reduce costly false alarms, while its remote look-in capabilities help ensure peace of mind.

    Honeywell’s V4000 Remote Video System is a versatile solution that opens up affordable video monitoring services for both security and business management purposes.

    Honeywell’s 4000 Remote Video System is a versatile solution for home and business remote video needs.

    Features

  • Remote video from up to 4 video sources
  • Keypad bus interface to Honeywell’s ADEMCO control panels
  • Transmits Video over standard phone lines, cellular and IP
  • Video Alarm Verification with Pre and Post Alarm images
  • Video Open/Close Reports
  • Record and transmit pre and post alarm activity
  • Callback feature
  • ME-JPEG description – proprietary compression
  • Pan/Tilt/Zoom (PTZ) - specific protocols supported with optional kit ERNA, VCLTP, Ultrack, Migvan, EscBaz and DynaColor protocols
  • On board modem controller
  • 2 LED indicators - for power (green) and status (red) indication
  • Selectable 75 ohm video termination portswitch
  • Remote Look-In Capability
  • Video Email Notification
  • End user observation software included
  • This North American style, multipurpose push button switch and clear Mini Stopper II cover protect a wide range of applications indoors. The button incorporates a unique, patented design and the clear cover helps prevent accidental activation.

    The highly advanced Stopper Station push button unit is ADA compliant. The button incorporates a unique, patented design that helps dramatically to stop accidental activation. Molded unit has a momentary mushroom button.

    Mini Stopper II consists of a clear, tamperproof, super tough polycarbonate shield, frame and spacer that fits over manual pull stations. Cover contains no horn. Designed for surface mount units, spacer has knockouts for exposed conduit.

    Features:

    • Color: White 
    • Cover: Mini Stopper II with Spacer 
    • Button Activation: Momentary mushroom

    Safety Technology Inc. STI-3100 Conduit Spacer - Clear for Stopper II and Weather Stopper Series Safety Technology Inc. STI-3100-B Conduit Spacer - Clear for Stopper II and Weather Stopper Series - Blue

    Clear conduit spacer adds two inches of depth to the Stopper II products. Has conduit knockouts on the bottom and top with filler pieces to fill conduit cutouts when no exposed conduit to mount over.

    Clear conduit spacer adds two inches of depth to the Stopper II products. Has conduit knockouts on the bottom and top with filler pieces to fill conduit cutouts when no exposed conduit to mount over.

       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please