You are here: Home > Shop Brands > Open House
We found 91 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Open House

  Accessories
  Data Networking
  Enclosures
  Music Distribution
  Surveillance Cameras
  Telephones
  Video Distribution
  Wallplates
Structured Wiring
Accessories
Data Networking
Enclosures
Enclosures & Covers
Music Distribution
Surveillance Cameras
Telephones
Video Distribution
Wallplates
Sort By:
Page of 8
OpenHouse  2182 IR Coupler OpenHouse  5545: Four-Channel Video Modulator with IR - REPLACES # 5445

OpenHouse 2182 IR Coupler


Our Price : $33.83

Use the 2181 IR Coupler to send IR control signals from one H838 to another H838. Using a master H838 and adding up to eight slave units, IR control signals will not be passed from master units to the slave units unless a Model 2181 is used at each slave H838 panel. The Model 2181 allows each TV with a target that is connected to the slave unit to send IR signals back to the audio/video devices connected to the master H838.

The 2181 can also be used to send IR signals to modulators connected to the A input on a H838 panel. IR normally passes only through the B input but using the 2181 in reverse position and connecting the green hot wire to the H838 panel the H838 or SVM series modulator will receive all IR signals.

  • Allows IR control over multiple H838s
  • Compact in-line design
  • Use one 2181 for each additional H838
  • The 5545 Four-channel Video Modulator with IR converts four video and stereo audio inputs to four programmable TV channels (stereo audio is converted to monaural audio after modulation). It has IR emitter output jacks and the ability to remotely power a H838 series distribution amplifier from up to 75' away.

    The 5545 works with both the 12-volt and 5-volt IR systems and accessories and offers video loop-through. Jumpers on the Model 5545 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Four modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • IR remote control signals from IR targets passes back through the system coax to IR emitters
  • Pushbutton digital programming of modulated channels
  • Can remotely power H838 series distribution amplifiers
  • OpenHouse  H000: Replacement Snap Locks (10-pack) OpenHouse 2184: IR Breakout Block
    The H000 Replacement Snap Locks (10-pack) can be used to replace any broken OpenHouse grid mounting snap locks. The snap locks secure the modules to the grid. Pull the lock out to release, push the lock in to lock.

  • 10-piece bulk pack
  • Replaces broken snap locks
  • Locks OpenHouse modules to grid
  • The 2184 IR Breakout Block allows local IR access on a H838 video hub. The video hub has a three-pin power connector. One of the connector's pins supplies the IR remote control signals received from IR targets connected to the hub.

    Attach the Model 2184 to the hub's power connector and up to four IR emitters may be connected directly to the Model 2184. To power the hub, the power supply transformer connects to the power jack on the Model 2184.

    A four-position expansion terminal block on the Model 2184 provides termination for additional connections to DC power and IR emitter signals.

  • Connects directly to H838 video hub
  • Allows for local IR in enclosure
  • Four emitter jacks
  • One power jack
  • One four-position expansion terminal block
  • 1.3" W x 3.0" H x 0.8" D
  • OpenHouse 5415: One-Channel Video Modulator OpenHouse 5425: Two-Channel Video Modulator
    The 5415 One-channel Video Modulator has the same output power as the rest of the 5400 series, but it is a quarter of the size. Video and stereo audio inputs are modulated to a programmable TV channel (stereo audio is converted to monaural audio after modulation).

    The 5415 modulator offers video loop-through. A jumper terminates the video input at 75 ohms. When the jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • One modulated TV channel
  • Creates a TV channel for a camera or other video source
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channel
  • Compatible with H838BID and H838HHR distribution amplifiers
  • The 5425 Two-channel Video Modulator converts two video and stereo audio inputs to two programmable TV channels (stereo audio is converted to monaural audio after modulation).

    The 5425 modulator offers video loop-through. Jumpers on the Model 5425 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Two modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channels
  • Compatible with H838BID and H838HHR distribution amplifiers
  • OpenHouse 5435: Three-Channel Video Modulator OpenHouse 5445: Four-Channel Video Modulator
    The 5435 Three-channel Video Modulator converts three video and stereo audio inputs to three programmable TV channels (stereo audio is converted to monaural audio after modulation). It offers video loop-through. Jumpers located on the back of the Model 5435 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Three modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channels
  • Compatible with H838BID and H838HHR distribution amplifiers
  • The 5445 Four-channel Video Modulator converts four video and stereo audio inputs to four programmable TV channels (stereo audio is converted to monaural audio after modulation). The 5445 offers video loop-through. Jumpers on the 5445 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Four modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channels
  • Compatible with H838BID and H838HHR distribution amplifiers
  • OpenHouse 5515: One-Channel Video Modulator with IR OpenHouse 5525: Two-Channel Video Modulator with IR
    The 5515 One-channel Video Modulator with IR has the same output power as the rest of the 5500 series, but it is a quarter of the size. Video and stereo audio inputs are modulated to a programmable TV channel (stereo audio is converted to monaural audio after modulation), and has an IR emitter output jack and the ability to remotely power a H838 series distribution amplifier from up to 75' away.

    The 5515 works with both the 12-volt and 5-volt IR systems and accessories. The Model 5515 modulator offers video loop-through. A jumper on the Model 5515 terminates the video input at 75 ohms. When the jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • One modulated TV channel
  • Creates a TV channel for a camera or other video source
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • IR remote control signals from an IR target passes back through the system coax to an IR emitter
  • Pushbutton digital programming of modulated channel
  • Can remotely power H838 series distribution amplifiers
  • The >5525 Two-channel Video Modulator with IR converts two video and stereo audio inputs to two programmable TV channels (stereo audio is converted to monaural audio after modulation). It has IR emitter output jacks and the ability to remotely power a H838 series distribution amplifier from up to 75' away.

    The 5525 works with both the 12-volt and 5-volt IR systems and accessories. The Model 5525 modulator offers video loop-through. Jumpers on the Model 5525 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Two modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • IR remote control signals from IR targets passes back through the system coax to IR emitters
  • Pushbutton digital programming of modulated channels
  • Can remotely power H838 series distribution amplifiers
  • OpenHouse CS-H218A 18'' Enclosure Cover OpenHouse CS-H236A 36'' Enclosure Cover
    18'' Enclosure Cover
  • 18'' high; 33 grid inches (two 16-1/2'' columns)
  • Fits between studs; 14'' wide.
  • Eight 2'' and four 3/4'' knock outs
  • Mounting tabs; 3 drywall thickness settings
  • Made of durable steel.
  • 36'' Enclosure Cover

  • 36" high, 69 grid inches (two 34 1/2" columns)
  • Fits between studs, 14" wide
  • Eight 2" and four 3/4" knock outs
  • Mounting tabs, 3 drywall thickness settings
  • Made of durable steel
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please