You are here: Home > Shop Brands > Camden Door Controls > Door Activation Devices > Key Switches > Narrow Key Switches
We found 21 results matching your criteria.
Sort By:
Page of 2
Camden CM-2020 Narrow Style Key Switch Control - SPDT Momentary Camden CM-2020DUR Narrow Style Key Switch Control, Momentary N/O & N/C, Duronadic Finish (US40)

Narrow Style Key Switch Control - SPDT Momentary

CAMDEN MANUFACTURING, CM-2000 Series flush mount switches meet the stringent demands of key switch controls. The assembly is only 1 3⁄4 " wide; perfect for door frames, or narrow areas. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

The CM-2000 Narrow Stile (MULLION) faceplate has a mounting platform to accept one (1) or two (2) switches, and a counter sunk cylinder opening, in a one piece casted assembly. Also included are a rubber gasket, brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws. (The mortise cylinder is not included, but is available from Camden Manufacturing.) The design and construction makes it ideal for all weather environments. The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for automatic doors, shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

INDOOR OR OUTDOOR FLUSH APPLICATIONS
MULLION STYLE, ONLY 1 3⁄4 " INCHES WIDE
PERFECT FOR ALUMINUM DOOR FRAMES
ACCEPTS STANDARD MORTISE CYLINDERS, 1"- 1 1⁄4 "
HEAVY DUTY 1⁄4 " THICK ALUMINUM PLATE
1 PIECE DIE CAST CONSTRUCTION
LOCATORS PREVENT CYLINDER FROM SPINNING
NO SET SCREWS REQUIRED
VANDAL RESISTANT
CYLINDER SITS FLUSH TO FACEPLATE
TAMPER PROOF SCREWS PROVIDED
HEAVY DUTY RUBBER GASKET PROVIDED
UL/CSA APPROVED SWITCHES
1 OR 2 SWITCHES MAY BE INSTALLED
LEFT AND/OR RIGHT OPERATION
WIDE RANGE OF SWITCH CONFIGURATIONS
COLOR CODED 18 AWG SOLDERED LEADS
HEAT SHRINK PROTECTIVE SLEEVE OVER CONTACTS
CASTED CENTRE RIB PROTECTS SWITCHES FROM DAMAGE
BRUSHED ALUMINUM FINISH
CUSTOM COLOR FINISHES & ENGRAVING AVAILABLE
OPTIONAL LED INDICATORS
FAST & EASY TO INSTALL
OPTIONAL 1-60 SECOND PNEUMATIC TIME DELAY

Camden 2020 is a Narrow Style Key Switch Control, Momentary, N/O & N/C Narrow Style Key Switch Control, Momentary N/O & N/C, Duronadic Finish (US40)

CAMDEN MANUFACTURING, CM-2000 Series flush mount switches meet the stringent demands of key switch controls. The assembly is only 1 3⁄4 " wide; perfect for door frames, or narrow areas. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

The CM-2000 Narrow Stile (MULLION) faceplate has a mounting platform to accept one (1) or two (2) switches, and a counter sunk cylinder opening, in a one piece casted assembly. Also included are a rubber gasket, brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws. (The mortise cylinder is not included, but is available from Camden Manufacturing.) The design and construction makes it ideal for all weather environments. The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for automatic doors, shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

INDOOR OR OUTDOOR FLUSH APPLICATIONS
MULLION STYLE, ONLY 1 3⁄4 " INCHES WIDE
PERFECT FOR ALUMINUM DOOR FRAMES
ACCEPTS STANDARD MORTISE CYLINDERS, 1"- 1 1⁄4 "
HEAVY DUTY 1⁄4 " THICK ALUMINUM PLATE
1 PIECE DIE CAST CONSTRUCTION
LOCATORS PREVENT CYLINDER FROM SPINNING
NO SET SCREWS REQUIRED
VANDAL RESISTANT
CYLINDER SITS FLUSH TO FACEPLATE
TAMPER PROOF SCREWS PROVIDED
HEAVY DUTY RUBBER GASKET PROVIDED
UL/CSA APPROVED SWITCHES
1 OR 2 SWITCHES MAY BE INSTALLED
LEFT AND/OR RIGHT OPERATION
WIDE RANGE OF SWITCH CONFIGURATIONS
COLOR CODED 18 AWG SOLDERED LEADS
HEAT SHRINK PROTECTIVE SLEEVE OVER CONTACTS
CASTED CENTRE RIB PROTECTS SWITCHES FROM DAMAGE
BRUSHED ALUMINUM FINISH
CUSTOM COLOR FINISHES & ENGRAVING AVAILABLE
OPTIONAL LED INDICATORS
FAST & EASY TO INSTALL
OPTIONAL 1-60 SECOND PNEUMATIC TIME DELAY
Camden CM-2030 Narrow Key Switch, SPDT Maintained Camden CM-2085 Narrow Key Switch, DPST 1-60 Second Pneumatic Time Delay

CM-2030 Narrow Key Switch, SPDT Maintained

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.
  • CM-2085 Narrow Key Switch, DPST 1-60 Second Pneumatic Time Delay

    CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

    CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

    CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

    CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.
  • Camden Marketing 20107212, Narrow Key Switch, SPST Maintained Red and Green 12V LEDs. Camden Marketing CM-2000 Narrow Key Switch, Momentary, N/O
    Camden 20107212, is a narrow key switch, SPST maintained, red and green 12V LEDs.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.

    *Mortise cylinder sold separately

  • Camden 2000, is a narrow key switch, momentary, N/O

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.

    *Mortise cylinder sold separately

  • Camden Marketing CM-2005 Narrow Key Switch, Momentary, N/C Camden Marketing CM-2010 Narrow Key Switch, SPST Maintained
    Camden 2005, is a narrow key switch, momentary, N/C

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.

    *Mortise cylinder sold separately

  • Camden 2010, is a narrow key switch, SPST maintained

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.

    *Mortise cylinder sold separately

  • Camden Marketing CM-20107124 Narrow Key Switch, SPST Maintained, Green 24V LED GE Security TPZ-IKE-2 16 Button Keypad with LCD'S, Built-In Reader Interface
    Camden 2010, is a narrow key switch, SPST maintained

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.

    *Mortise cylinder sold separately

  • GE Security TPZIKE2 16 Button Keypad with LCD'S, Built-In Reader Interface

  • SKU: TPZ-IKE-2
  • 16 Button Keypad with LCD'S, Built-In Reader Interface
  • GE Security TPZ-IKE-2L 16 Button Keypad With LED'S & LCD'S, Built-In Reader Interface GE Security TPZ-K11L 12 button keypad with LED's
    GE Security TPZIKE2L 16 Button Keypad With LED'S & LCD'S, Built-In Reader Interface

  • SKU: TPZ-IKE-2L
  • 16 Button Keypad With LED'S & LCD'S, Built-In Reader Interface
  • GE Security TPZK11L 12 button keypad with LED's
  • SKU: TPZ-K11L
  • 12 button keypad with LED's
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please